Attachment 1 (SON).pdf

FA3002-21-R-0010 - Attachment # 1

Counter-Improvised Explosive Device (C-IED) / Counter-small Unmanned Aircraft Systems (C-sUAS) Training Aids

Statement of Need (SON) 20 April 2021

1. Background: In response to the global threat of Improvised Explosive Devices (IEDs), Unmanned Aircraft Systems (UAS), and expeditionary training requirements, selected US Air Force training units are required to train and ensure all Airmen know how to identify, react, and properly respond to IEDs, UAS, and operate in high threat, uncertain environments. The training is executed at numerous CONUS and OCONUS locations via classroom lecture and hands-on exercises. The exercises include training scenarios conducted in surrogate villages designed to replicate the current theater of operations (i.e. – Afghanistan, Iraq, etc.). The training scenarios include role players, replicated IEDs, UAS, and expeditionary training aids using the same and/or similar tactics, techniques, and procedures employed by enemy combatants and insurgents. In support of this training, HQ AETC/A3Q requires Commercial- Off-The-Shelf (COTS) training aids and support equipment as listed in this Statement of Need (SON). On some occasions, certain items will not be available as COTS and will require Fused Deposition Modeling (FDM) as a service (a.k.a. 3-D Printing). The acquisition of drones must adhere to all DoD regulations and section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act (NDAA) for Fiscal Year (FY) 2019.

2. Item Descriptions: Our AF C-IED and C-sUAS training sites require the most realistic replica ordnance available for use during C-IED and C-sUAS training operations. All replica ordnance must be constructed of extremely durable materials specifically designed for producing ordnance training aids which are heavy duty and must withstand years of continued use during C-IED and C-sUAS training operations under severe operating conditions. Additionally, these items must be inert, contain no hazardous materials and be one-person portable. Some items will require contractor installation. Contractor shall provide the items listed below:

2.1. IED Training Lane Kit: Kit contains the following items: 1 each 155mm replica projectile; 1 each 155mm M1A1 South African replica projectile; 1 each 152mm USSR replica projectile; 1 each 130mm USSR replica projectile; 1 each 122mm USSR replica projectile; 1 each 107mm replica rocket; 1 each 73mm PG-9 replica rocket; 1 each PG-7 replica rocket; 1 each RKG-3 replica Anti-Tank parachute grenade; 1 each RG-42 USSR replica grenade; 1 each RGD-5 USSR replica grenade; 1 each F-1 USSR replica grenade;

1 each TC/6 Anti-Tank replica mine; 1 each VS-2.2 Anti-Tank replica mine; 1 each VS-

1.6 Anti-Tank replica mine; and 1 each VS-50 AP replica mine.

2.2. Replica Electric Blasting Caps: Replica Electric Blasting Caps have a closed end, and have a hole drilled through the body to show that it is empty.

2.3. 1000 ft Rolls of Detonation Cord: Replica roll of detonation cord red in color.

2.4. Replica Rocket Propelled Grenade Launchers: Inert, RPG-7 Launcher replica.

2.5. Replica PG-7 Grenades: Exact replica of a Rocket propelled grenade including folding fin assembly that allows RPG to be loaded into simulated launcher.

2.6. Replica 82mm Soviet/Russian Mortar Rounds: Exact replica of Soviet/Russian mortar round.

2.7. Replica 82mm Chinese Mortar round: Exact replica of Chinese mortar round

2.8. Replica 81mm HE Mortar Rounds: Exact replica of 81mm HE mortar round

2.9. Replica 60mm HE Mortar Rounds: Exact replica of 60mm mortar round and is tan in color.

2.10. Replica Italian TC/6 Mines: Exact replica of mine and is tan in color.

2.11. Replica Italian VS50 Mines: Exact replica of mine and is tan in color.

2.12. Replica Soviet OZM-72 Bounding Mines: Exact replica of mine and is OD green in color.

2.13. Replica 107mm Rocket: Exact replica of rocket warhead and is offered in tan and OD green in color

2.14. Replica Soviet 152mm Artillery Round: Exact replica of projectile.

2.15. Pressure Cooker IED: Replica Middle Eastern style pressure cooker typically used in the manufacture of IEDs.

2.16. Replica OG-7 Grenades: Exact replica OG-7 Grenades including folding fin assembly that allows RPG to be loaded into simulated launcher.

2.17. Small Assault Squad Kit: The Small Assault Squad Kit contains an exact inert replica of the following items: 2 each AK-47 w/Folding Stock made of 100% metal/wood, working actions and magazines are removable; 1 each AK-47 w/Solid Stock made of

100% metal/wood, working actions and magazines are removable; 1 each RPD Machine

Gun made with steel framed durable resin is 100% visually accurate; and 2 each Suicide

Vests w/siren penalty which are set for pressure activation.

2.18. Small Fire Support Kit: The Small Fire Support Kit contains an exact inert replica of the following items: 1 each AK-47 w/Solid Stock made of 100% metal/wood, working actions, and removable magazines; 1 each SVD Dragunov sniper rifle made with steel framed durable resin and 100% visually accurate; 1 each RPD Machine Gun made with steel framed durable resin and 100% visually accurate; 1 each RPK Machine Gun made with steel framed durable resin and 100% visually accurate; 1 each PKM Machine Gun made with steel framed durable resin and 100% visually accurate; and 2 each Suicide

Vests w/siren penalty which are set for pressure activation.

2.19. Large Weapon Assault Kit: Kit contains an exact inert replica of the following items: 3 each AK-47 w/Folding Stock made of 100% metal/wood, working actions, and removable magazines; 3 each AK-47 w/Solid Stock made of 100% metal/wood, working actions, and removable magazines; 1 each RPG Launcher kit which includes 1 each inert RPG-7 launcher and 1 each inert PG-7 round; 2 each SVD, Dragunov sniper rifles made with steel framed durable resin and 100% visually accurate; 3 each RPD Machine Guns made with steel framed durable resin and 100% visually accurate; 1 each RPK Machine Gun made with steel framed durable resin and 100% visually accurate; 2 each PKM Machine

Guns made with steel framed durable resin and 100% visually accurate; and 5 each

Suicide Vests w/siren penalty which are set for pressure activation.

2.20. Improvised Explosive Bomb Builder Kit: Each kit is completely inert, non-hazardous and includes each of the following: Collapsing Improvised 6ft Work Table and Legs

(portable); tool bag; Ammo Can (Storage of Tools & IED Components); Large Needle

Nose Hand Tool; Small Needle Nose Hand Tool; Wire Strippers Hand Tool; Soldering

Iron / Solder; 24AWG Wire Spool, 500ft Black; 24AWG Wire Spool, 500ft – Brown;

24AWG Wire Spool, 500ft – White; Assorted AWG Speaker Wire Reel, 100ft; 5 each

Dummy Cell Phones; 3 each Chinese Mechanical Washing Machine Timers; Battery

Holder Assortment - 8 pcs, Battery Assortment -12 pcs (3 each 9V, 4 each AA, 4 each

AAA, and 1 each 12V); Electrical Components Assortment - 100 Pcs; Improvised

Switches Assortment - 12 Pcs; 3 each Electrical Tape Rolls- Black; 1 each Large Burlap

Bag - IED Container; 10 lbs of Nails/Shrapnel/Frag in Container; IED Firing Devices Kit

(PMRS (2-way Radio), Cell Phone, Cordless Phone, and Digital Timer in IED configuration); 10 each non-electric detonator Blasting Caps; 25 each Electric Detonator

Blasting Caps; Detonating Cord 1000' ft Spool; Time Blasting Fuse 100' ft Coil; 5 each

SEMTEX-H, 1 LB Blocks – Orange; 5 each 1/2 lb SEMTEX-H Bulk Simulated Material

– Orange; Plastic Explosives (PE) Storage Bag (For Orange Simulant); PE Storage Bag

(For Red Simulant); 10 each Arabic Dynamite Sticks; 10 each Russian Dynamite Sticks; 5 each Middle Eastern TNT Blocks; 3 each IED, Replica TC/6 Anti-Tank Mine with Steel

Can Booby-trap; IED Pressure Cooker; IED PE Bag with High Explosive (HE) Charge;

IED, Satchel Charge/Suicide Device; IED, Suicide Vest; 2 each Soviet TMD-B box mines; 4 each Soviet PMN anti-personnel (APERS) Mines; 10 each Improvised Blasting

Caps; 5 each rolls of Packing tape; 10 each fertilizer bags indigenous to SE Asia; 5 each empty 20 liter palm oil jugs; 5 each empty random cooking oil containers of various sizes;

basic tool kit which includes hammer, saw, screwdrivers, glue gun; 2 each DTMF devices;

3 each containers of inert Potassium Chlorate, 10ea functional improvised pressure plates

(utilizing various items: i.e. wood, foam, plastic, etc.). pressure plates need to be able to be easily attached to IED circuit.

2.21. Replica M4 A2, Solid Dummy Training Rifle: Features a full metal barrel and flash hider and is made of extremely durable solid urethane plastic that will not break or crack.

And movable charging handle

2.22. Replica M4 AWST, Solid Dummy Training Rifle: Item includes an actual six position collapsing stock, full length metal barrel and metal RIS rails. The main body is produced of extremely durable solid urethane material and movable charging handle

2.23. Replica M16 A2, Solid Dummy Training Rifle: Item features include a full metal barrel, flash hider, and movable charging handle.

2.24. Replica AK-47, Solid Dummy Training Rifle: Item is constructed of extremely durable urethane, features a steel barrel that extends through the receiver to prevent bending or breaking and movable charging handle.

2.25. Replica Landmine Training Kit w/Case: Each kit includes: 1 each TC-6 Anti-Tank

Mine; 1 each VS-2.2 Anti-Tank Mine; 1 each VS-1.6 Anti-Tank Mine; 1 each VS-50 AP

Mine; 1 each TS-50 AP Mine; 1each YM-1 AP Mine; 1 each VS-MK2 AP Mine; and 1 each POMZ Stake Mine, a heavy-duty storage/transport case capable of storing all kit contents.

2.26. Functional A.P. Landmine Training Kit with Penalty Box: Each kit includes inert AP landmines with all functional features, realistic pressure switches, 1 each PMA-2; 1 each

VS-50; 1 each P2-MK2; 1 each PMN-2; 1 each Penalty Box; 1 each OZM-72 mine, 1 each 50' Extension Wire and 9V battery leads. Each training aid is made of heavy duty solid cast resin. Kit includes a heavy-duty storage/transport case capable of storing all kit contents. Each training aid is capable of integrating into a Penalty Box. The Penalty Box includes a siren and LED lights to indicate arming/trigger status.

2.27. Platoon Level Functional IED Training Kit: Each modular kit is designed to support

Platoon level IED training, when training lanes and ranges are occupied or unavailable.

The kit includes a modular penalty box unit capable of monitoring all switches contained in the kit as well as other Normally Open, Normally Closed switches created by the end user and include a siren. The Penalty Box includes the following features: Automatic 30 second safe separation (arming delay); ability to automatically detect whether a switch is normally open or normally closed; a penalty siren and LED lights that activate for 30 seconds when penalty box is initiated; and an Automatic Circuit Reset. The Kit includes: 1 each low metal content pressure plate; 1 each mousetrap tripwire; 1 each remote key fob;

1 each anti-movement switch; 1 each Trembler (vibratory) Switch; 1 each Digital Timer

Switch; 1 each photocell switch; 1 each passive infrared (PIR) Motion Sensor; 1 each

Commercial Pressure Mat; 1 each Replica 122mm Russian Artillery Projectile; 1 each

Replica 82mm Chinese Mortar Round; 1 each Simulated Grapeshot IED; 1 each

Simulated 5 lb bulk HE Charge, wrapped in PE Bag. Kit includes a heavy-duty storage/transport case capable of storing all kit contents.

2.28. Grenade Training Kit w/Case: Each kit includes (1) RG-42, (1) RDG-5, (1) F-1 Frag

Grenade, (1) M-67 Frag Grenade, (1) Mk2 Frag Grenade, (1) RKG-3 (Anti-Armor

Grenade), (1) M34 White Phosphorus Grenade, (1) M18 Smoke Grenade, (1) M25A2 CS

Gas Grenade, (1) ABC-M7A2 CS Gas Grenade, (1) AN-M14 Incendiary Grenade. Kit includes a heavy-duty storage/transport case capable of storing all kit contents.

2.29. Disposable 12 Gram CO2 Cartridge - Case of 300: Disposable CO2 cartridge.

2.30. CO2 Cartridge training Landmines- Personnel and vehicle size landmines that are actuated by pressure triggers and use CO2 to make an audible noise. Devices should not produce fragmentation or require a battery power source.

2.31. Special FX powder - White - Case of 12: White FX Powder (Cool Smoke) used to simulate the visual cloud effect of an explosion. Powder should be made of non-toxic environmentally friendly ground Talc powder and contain no explosive hazards

2.32. RHINOS for MRAP: a surrogate (non-functioning) RHINO with no electrical connections to the vehicle. This RINO looks identical to the anti-PIR “RHINO”, but lacks all internal components. Accessories may vary depending upon vehicle type. The VIIEDS is designed to familiarize deploying personnel with the challenges of operating a vehicle with a RHINO system installed.

2.33. RHINOS for HMMWV: a surrogate (non-functioning) RHINO with no electrical connections to the vehicle. The VIIEDS looks identical to the anti-PIR “RHINO”, but lacks all internal components. Accessories may vary depending upon vehicle type. The

VIIEDS is designed to familiarize deploying personnel with the challenges of operating a vehicle with a RHINO system installed.

2.34. CITMV10: The Remote Controlled Vehicle Immobilization device contains a power supply, audio amplifier, speakers and incorporates the following: engine shut off/kill module, an audio module allowing the use of MP3 tracks provided by the instructors and the ability to produce a non-toxic fog inside the vehicle providing a more realistic training environment.

2.35. ARIMSV10: The Advanced Remote Initiation Management System (ARIMS) combines the vehicle and scenario control capabilities of the CITM with the remote management and long range initiation capabilities of the RIMS. This configuration allows an operator to control three vehicles and up to six training enhancement systems with a single remote control.

2.36. RIMSV10: The Remote Initiation Management System (RIMS)™ is a long range transmitter/receiver system that allows an operator to control up to six separate devices from a single remote control. The system consists of two Initiation Point Boxes (IPB’s) and an Advanced Remote Control. Each IPB has three independently controlled firing points. Each firing point can be connected to any training enhancement system (IE Blast

Simulator, Small Arms Simulator, etc.).

2.37. Military Machine Gun Sim Kits: This small arms simulator provides realistic audio and visual machine gun simulation (120+ Decibels) for training involving incoming small arms fire. The system can be easily broken down and stored in a convenient hardened case

(provided). The system is portable, water resistant and self-contained.

Note: Includes interchangeable barrels and adjustable fire rates allow the X-CAL

Machine Gun Simulator to simulate 5.56, 7.62, and .50 cal weapons. Manual trigger cable and ability to be fired remotely.

2.38. AK 47/74 machine gun Backpack Sim Kit: This small arms simulator provides realistic audio and visual machine gun simulation (120+ Decibels) for training involving incoming small arms fire. The system can be easily broken down and stored in a case. The system is portable, water resistant and self-contained (power source and fuels).

2.39. Wiring Harness for HMMWV: Harness allows for easy installment of a remote “kill switch” device to simulate loss of power to vehicle. This harness allows for the ability to quickly move simulator from one vehicle to another.

2.40. IED Monitor Kit: IED Monitoring System, specially designed to simulate blasting cap or “brain box” in a training IED. This system allows users to use electrically functional

IED Training Aids that are 100% visually accurate. User needs to be able to build an electrically functional circuit and place the training cap/brain-box where an electric blasting cap or firing signal receiver would normally go. The initiator sends a signal to a receiver that either shows device imitation or activates a blast simulator. When a signal is received, the wireless cap will activate the appropriate output plug. The outputs on the cap should send a signal that can fire any type of monitoring system currently on the market including strobes, sirens, electric matches, Non-Pyrotechnic C02 Battlefield effects, Propane/Oxygen Blast Simulators, Flash Effect Simulators and many other monitoring systems that can receive initiation signal Monitor System. Kit should include 5 ea caps or brain box devices and have an all-weather storage case

2.41. Handheld Transmitter to be utilized with Blast simulators: transmitter provides a rugged housing and an intuitive interface for controlling multiple Explosive Simulators.

Ten LEDs are each dedicated to a Simulator and continuously indicate not only the communications status of the unit but its Armed/Disarmed/Firing state as well. A single operator can control and monitor an entire training range of several acres from one location. Utilizes the 915MHz, 1,000m+ range. Compatible with all current Blast

Simulators in inventory and Controls up to ten simulators simultaneously.

2.42. Siren Accessory: Utilizes a high intensity siren that adds confusion and the "ringing ear" effect to inhibit communications in an enclosed area such as a vehicle. Each siren plugs directly into HMMWV wiring harness and is compatible with smoke/strobe devices.

2.43. LED Strobe Light Accessory: The Strobe Light Accessory is compatible with Siren accessory and utilizes state of the art high intensity LEDs. The strobe light reflects light off the smoke dispensed by other training devices to induce additional confusion and stress during a simulated IED vehicle strike. The strobe light needs the ability to plug directly into smoke generating devices and come with stand-alone power supply, and work in conjunction with other smoke producing devices remotely, and is weather resistant.

2.44. Extended Signal Repeater: For use in remote training locations to allow for signal boost/network signal to be used for remote controlled training devices. The system incorporates high capacity batteries to allow operators to charge up to 3ea power systems simultaneously from "LOW" power to 100% without the need for local power and is capable of deployment to remote locations on sites with large mission areas and act as a signal repeater. The system would incorporate a large battery capacity allowing the repeater to be deployed for 30 days without needing to be charged. It is able to retransmit signals from all components of a training area.

2.45. Fire Randomizer Accessory: The Fire Randomizer Accessory is compatible with pyrotechnic Military Machine Gun Simulator and other blast simulator products. The randomizer receives the fire signal from the trigger/sensor and then sends a random burst or fire signal to the Military Machine Gun Simulator for a set amount of time. Operators are capable of selecting different burst intensities (short/intermittent bursts or

Heavy/Nearly continuous Bursts) and different activation lengths (5 seconds to 60 seconds). The randomizer also incorporates the option for a delay between randomizer activation and machine gun simulator initiation.

2.46. Signal Repeater: Signal Repeater is a small version of the extended signal repeater and is compatible with existing training products. The repeater does not have the charging or extended deployment capabilities of the larger system. The repeater is much smaller in size making it easier to deploy and conceal. It maintains the signal repeating capabilities of the extended deployment repeater and covers a large operation area. It is quickly and easily taken down. It is capable of repeating the signals of any components within the training area.

2.47. Area/Room Monitoring Module: When initiated, the module produces an explosion sound effect and emits a large volume of safe smoke. A single system monitors multiple triggers. Operators are able to use triggers available commercially off the shelf or triggers operators build onsite with remote simulation caps or brain boxes. The system is compatible with siren and LED strobe accessories as well.

2.48. Portable HME Lab Kit: Each kit is completely inert and non-hazardous and includes each of the following: 2 each pairs of Chemical Resistant Gloves (13 mil and Size 8); 1 each knee boots (size 12); 1 each premium cast iron corn grinder for wheat and grains; 1 each small personal fridge; 1 each inert hydrochloric acid 55 gallon chemical drum (sealed and empty); 1 each lab ware equipment package (basic); 1 each half mask respiratory body (size large); 2 each goggles (economy direct vent); 5 each two gallon jugs; 2 each 4-liter amber glass bottles; 3 each 1-liter sterile water; 2 each artificial ice cubes (12 piece, 1”, clear); 1 each pressure cooker; 1 each copper tubing ¼ inch; 1 each electric countertop range; 2 each aluminum powder (500g); 2 each hydrogen peroxide 16 oz bottles; 1 each citric acid (5 lb); 1 each confectioners sugar (1 lb); 1 each cookie sheet 17” x 11”; 1 each cookie sheet 15” x 10”; 1 each cookie sheet 13” x 9”; 1 each package of coffee filters; 1 each mason jar (case of 9 ); 5 each inert urea nitrate bags; 2 each acetone (1 quart); 1 each camp stove fuel tablets (hexamine); 5 boxes of 100 count (minimum) matches; 4 each middle eastern jugs; and 3 each heavy-duty storage/transport cases capable of storing all kit contents.

2.49. Command IED Training Kit: Kit Includes: (1) DTMF Device IED switch with 2-way radios, (2) Motorcycle alarm IED switches with key FOB, (2) Command wire IED switches with rocker switches, (2) Command pull IED switches. Training aids are electrically functional and explosively inert. Circuits are compatible with wireless signal blasting caps to allow integration into existing training systems

2.50. Timed IED Training Kit: Kit Includes: (2) Mechanical clock initiators and (2) Digital timer initiators. Training aids are electrically functional and explosively inert. Circuits are compatible with wireless signal blasting caps to allow integration into existing training systems.

2.51. Victim Operated IED Training Kit: Kit Includes: (2) Tripwire Initiators, (2) Anti-tamper push/pull initiators, (2) Pressure plate initiators. Training aids are electrically functional and explosively inert. Circuits are compatible with wireless signal blasting caps to allow integration into existing training systems.

2.52. Men Arab Apparel - Disha Dasha, Egal, Smagh: Includes: Disha Dasha, pajama pants, prayer hats, and head scarves; all in multiple sizes

2.53. Women Arab Apparel - Abaya, Burqa, Hijab: Includes: Abaya, Burqa and Hijab or similar; all in multiple sizes.

2.54. Bike Shop Set Design: The set design includes: 1 each bike rack; 1 each work bench;

assorted bikes and parts.

2.55. Clothing Vendor Shop Set Design: The set design includes: 2 each clothing bins with a minimum of 20 items per bin wired securely to the bin and a minimum of 8 hanging items. All clothing items consistent with Middle Eastern clothing.

2.56. Electronics Store Set Design: The set design includes: 2 each display tables: 35 each assorted electronic devices such as VCR’s, TVs and or radios. Gives appearance of an actual store front set up for use by the local populace.

2.57. Garage/Auto Parts/Tire Shop Set Design: The set design includes: 2 each gas pump replicas with gas hoses; 1 each work bench; and 10 assorted tires.

2.58. Restaurant Set Design: The set design includes: 4 each four person tables; 12 each chairs; 4 each tea sets; 1 each side table; and assorted restaurant items i.e. utensils, plates and salt and pepper shakers. All tabled are secured to the table to prevent unauthorized removal.

2.59. Rug Shop Set Design: The set design includes: 5 each 4’ X 6’ large rugs; 5 each 2’ X 8’ medium rugs; and 5 each 2’ X 3’ small rugs. The rugs are of Middle Eastern design.

2.60. Bakery Set Design: The set design includes: 2 each wooden stands with an assortment of faux (plastic or similar) bread products.

2.61. Butcher Shop Set Design: The set design includes the following number and type of faux meat products: 6 each steaks; 1 each cow head; 1 each goat head; 2 each beef legs; 2 each pieces of beef; 1 each meat rack; and 1 each butcher block.

2.62. Fruit Stand Set Design: The set design includes: 3 each fruit carts with 3 bays and an assortment of faux fruit that cannot be removed from the bays.

2.63. Grain/Spice Store Set Design: The set design includes: 16 each large bags of various types of grains and spices.

2.64. Kabob Vendor Set Design: The set design includes: 1 each grill; 20 each skewers with faux meat; 1 each side tray; 1 each side table; and a minimum of 4 sets of eating utensils.

2.65. Vegetable Stand Set Design: The set design includes: 3 each carts with 3 bays and an appropriate assortment of faux vegetables that cannot be removed from the bays.

2.66. IED Builder Sustainment Custom Kit: Each kit is completely inert, contains non-hazardous materials, and includes an improvised ink pen detonator, bullet case detonator, simulated det cord, Power Sources, battery holders, battery connectors, batteries, door pins, large assortment of switches, push buttons, toggles, pneumatic switches, large assortment of terminals and connectors, resistors, 20 each SCR. (Timers, Tools, Radio

Controlled Firing Devices) 10 each Washing Machine Timers; 2 each 60 minute mechanical timers, 2 each spring timers, 1 each Walkie Talkie/ 2-Way Radio Set; PIR sensor, modified cell phone, RC-10 12 VOLT 6A REMOTE RELAY KIT; 1 each

Motorcycle Anti-theft Security Alarm; 1 each SCR circuit with a large assortment of relays, and capacitors. Kit also includes various improvised switches including Clothes

Pin Switches, Ball in Cage switches, 12 gauge wire loop switches; Mousetrap switches, Mousetrap anti lift and pull switches and various other types of switches, plus a soldering station including lead-free Rosin Core Solder; Electrical Tape and assorted Color Wire

Spools. Added in 2018: Version 2 of the kit also includes six Middle Eastern Style plastic 5 gallon jugs in colors of (2)white/(2)yellow/(2)orange; twenty 12 inch long by ½ wide hacksaw blades, and two 6,000 count cartons of 4.45mm BB pellets (BB bullets), electric piezo buzzer noise makers for circuits.

2.67. ISIS IED Training Kit: Kit includes 4 each ISIS HME 5 gallon Jug IEDs; 2ea ISIS improvised blast mines, 2ea ISIS improvised directional frag IEDs; 2 each ISIS improvised directional mine; 4 each ISIS 40mm ammo casing IEDs; 4 each ISIS 60mm

Mortar improvised grenades.

2.68. Quad Drone Training Kit: Quad-copter Drone, with 4ea Brushless Motors; 8 ea

Propellers; 1ea Flight control/autopilot circuit module with integrated Ground Station

Module allow for Auto Take-Off and Landing, Failsafe Return-to-Home Functions w/ standard return-to-home function, Waypoint Flight Mode, On-screen telemetry/battery data, Video/picture capture, w/ 16CH Digital Telemetry Radio System; 1ea 16 channel hand held radio receiver controller; 7” HD-LCD screen integrated/attachment capable; 4ea

Batteries; 1ea battery charging unit; 1ea First Person View (FPV) goggles; 1ea Hard bodied/frame, foam lined, weather resistant storage case; 1ea System integrated, on-board, ordnance simulator drop system compatible w/ existing radio frequency (RF) initiated training blasting caps and training IED simulation systems; Assembly, Configuration, and testing of drone must be IAW FAR 52.225-5, Trade Agreements.

2.69. Hex Drone Training Kit: Hexa-copter Drone with 6ea Brushless Motors; 18ea

Propellers; 1ea Flight control/autopilot circuit module with integrated Ground Station

Module allow for Auto Take-Off and Landing, Failsafe Return-to-Home Functions w/ standard return-to-home function, Waypoint Flight Mode, On-screen telemetry/battery data, Video/picture capture, w/ 16CH Digital Telemetry Radio System; 1ea 16 channel hand held radio receiver controller; 7” HD-LCD screen integrated/attachment capable; 4ea

Batteries; 1ea battery charging unit; 1ea First Person View (FPV) goggles; 1ea Hard bodied/frame, foam lined, weather resistant storage case; 1ea System integrated, on-board, ordnance simulator drop system compatible w/ existing radio frequency (RF) initiated training blasting caps and training IED simulation systems; Assembly, Configuration, and testing of drone must be IAW FAR 52.225-5, Trade Agreements.

2.70. Octo Drone Training Kit : Octo-copter Drone with 8ea Brushless Motors; 24ea

Propellers; 1ea Flight control/autopilot circuit module with integrated Ground Station

Module allow for Auto Take-Off and Landing, Failsafe Return-to-Home Functions w/ standard return-to-home function, Waypoint Flight Mode, On-screen telemetry/battery data, Video/picture capture, w/ 16CH Digital Telemetry Radio System; 1ea 16 channel hand held radio receiver controller; 7” HD-LCD screen integrated/attachment capable; 4ea

Batteries; 1ea battery charging unit; 1ea First Person View (FPV) goggles; 1ea Hard bodied/frame, foam lined, weather resistant storage case; 1ea System integrated, on-board, ordnance simulator drop system compatible w/ existing radio frequency (RF) initiated training blasting caps and training IED simulation systems; Assembly, Configuration, and testing of drone must be IAW FAR 52.225-5, Trade Agreements.

2.71. Large Fixed/Flying Wing Drone Training Kit: Large Flying/Fixed Delta Wing

Platform frame (6.5 to 7.5 Ft wing span) to include 1ea SK3 3548-700kv motor; 1ea propeller (13 x 6.5) for efficient non-gliding flights; 2ea batteries; 1ea battery charging unit; 6ea HS-5245MG control servos; 1ea Flight control/autopilot circuit module with integrated Ground Station Module, Failsafe Return-to-Home Functions w/ standard return-to-home function, Waypoint Flight Mode; 1ea capability to hold improvised payloads up to 4lbs; 1ea IED carrying system compatible w/ existing radio frequency (RF) initiated training blasting caps and training IED simulation systems; 1ea Color First

Person View (FPV) Camera with dual feed viewing capability; 360 degree rotating camera mount/gimbal; 1ea First Person View (FPV) goggles; 1ea FPV 32 Channel

Monitor w/ diversity Receiver; 2.4 GHz Digital Modulation radio/receiver controller; 1ea storage/shipping case; Assembly, Configuration, and testing of drone must be IAW FAR

52.225-5, Trade Agreements.

2.72. Small Fixed Wing Drone Training Kit: Small Fixed Wing Drone platform frame (71” wide, 48” long) with 2ea 4S 14.8V 5000mAh lithium polymer batteries; 1ea battery charging unit; 3ea 6-channel 9G servos; capability for first person view camera; 1ea

650TVL(W/B),600TVL(Color) First Person View (FPV) Camera with dual feed viewing capability; 1ea 2820/3542, 850-950Kv motor; 1ea 11x12 propeller; electronic speed control; 1ea Flight control/autopilot circuit module with integrated Ground Station

Module, Failsafe Return-to-Home Functions w/ standard return-to-home function, Waypoint Flight Mode; Hand held controller with viewing screen; 1ea ordnance/IED carrying system simulator system compatible w/ existing radio frequency (RF) initiated training blasting caps and training IED simulation systems 1ea Storage/shipping case;

Assembly, Configuration, and testing of drone must be IAW FAR 52.225-5, Trade

Agreements.

2.73. UAS (Drone) Maintenance Kit: Drone Maintenance Kit includes a 4 lb sledge hammer, spot welder, spring clamp, Fluke Multimeter Kit, deep reach spring clamp, Fluke Clamp

Meter, steel folding utility knife, portable organizer - 12 to 62 pieces, snap off utility knife

6", 3/8", 1/2" drive SAE. metric number of pieces 134; scissors, plier and wrench set - 8 pieces, tin snip scissors, curved jaw locking pliers - 10", screwdriver 10" shank, 3/16" flat tip, 12" adjustable wrench with 1/2" jaw capacity, phillips screwdriver - 4" shank #2 tip, long SAE/METRIC hex key set - 20 pieces, Phillips screwdriver 3" shank #1 tip, precision screwdriver set - 8 pieces, digital caliper, wire stripper, 22-16 AWG; digital bench scale, level - 9", digital hanging scale, 4" center punch, 20V 1/2" cordless drill, pick and hook set - pieces, AS6NG alkaline powered cordless screwdriver, hobby knife, 21 piece drill bit set, 1/16-1/2; knife blade - 5, variable speed rotary tool (Dremel type), tweezer, heat gun

250-1000 F 120V, bungee strap black - 36 inches, glue gun 80W 7/16", 1/2", .45,.43;

10FT extension cord, Digital High temp adjustable solder station - Hakko; 10 piece

TORX screwdriver set T6-T30; GT LED light helping hands, multipin wire test leads, incandescent hand lamp - 75W and 25 ft cord, custom cutout pelican style tool box, flashlight with 3 D cell batteries - 168 lumens, silver/black in color, coaxial crimpers, LED flashlight - 120 lumens, black, JST pin crimpers; AC-DC power supply - input 115-

230VAC, output 51V; RJ45 crimpers, nitrile gloves - green size L, green, 100 PK

2.74. UAS (Drone) Consumables Kit: Drone Consumables Kit includes 10 each, 1 ft length

1/16" heat shrink black, 10 each EC3 connectors male and female, 10 piece 1ft length

1/16" heat shrink clear, 10 each EC5 connectors male and female, super glue - .53 oz bottle, clear, 20 MINUTE EPOXY; 10 each JST FEMALE; 1 each 5 MINUTE EPOXY; 2 each 3 PIN FUTABA SERVO extensionXTENSION 6"; 1 each 300ML black silicone, 2 each 3 PIN FUTABA servo extension 12"; sensor safe blue RTV 3oz, 2 each 3 PIN

FUTABA servo extension 18"; UV-resistant fast cure 4000 UV white gasket sealant, 2 each 3 PIN FUTABA servo extension 24"; 242 series medium strength threadlocker blue

50ML bottle, 2 each 3 PIN FUTABA servo extension 36"; 290 series threadlocker green

50ML bottle, 2 each 3 pin servo crimp set male/female, 262 series threatlocker red, 50 ML bottle, 2 each RJ-45 crimp connector male, N95 disposable respirator 10 pack, 2 each RJ-

45 crimp connector female socket, table top torch, 2 each 12V barrel connector male, 2 each butane 2.1 OZ; 2 each 12V barrel connector female, cloth apron, 2 each SMA 12" extension male-male, carbon steel utility blade 5 pack, 2 each SMA 12" extension female-female, carbon steel snap off blade - 3, 2 each SMA 12" extension female-male, AA batteries - 16, 2 each SMA 12" extension male-female, clear hot glue stick 4" - 6; 2 each

RP-SMA 12' extension male-male, solder tip 0.062; 2 each RP-SMA 12' extension femaile-female, 75W light bulb - 6, 2 each RP-SMA 12' extension female-male, D batteries - 12; 2 each RP-SMA 12' extension male-female, 2 each CR-123 batteries, pack of 2; 2 each Type-N to SMA adapter male-male, lead free solder, 125 DIA, 1 LB, 97% tin, 3% copper, rosin core, 2 each Type-N to SMA adapter female-female, lead free flux, 16OZ; 2 each Type-N to SMA adapter female-male, vinyl electrical tape 7 MIL 3/4" X 66 ft black; 2 each Type-N to SMA adapter male-female, premium duct tape 1 7/8 X 35 yard, 17 MIL; 2 each Type-N to RP-SMA adapter male-female, click lighter, calico brands, 2 each Type-N to RP-SMA adapter female-female, black tie wrap, 50lb test, pack of 1000; 2 each Type-N to RP-SMA adapter female-male, 10 each XT30 connector male and female, 2 each Type-N to RP-SMA adapter male-female, 10 each XT60 connector male and female, 2 each fishermans clear tackle box for wires, 10 each XT90 connector male and female, 2 each consumable airtight storage case, 10 each deans male and female.

2.75. Blast Simulator – Small: Small Blast Simulator Device that is 17" tall with 200 cu in sound chamber; Mounting bracket for attaching to walls; Gas valves and high voltage components sealed in epoxy resin; Can be fired while partially submerged; Equipped with

UL listed Flashback Arrestors; Spark plug located outside of main Sound Chamber for rain proof operation; Spark plug located in path of oxygen and propane gas flow into

Sound Chamber; Maps of measured Blast Overpressure produced by simulated explosions; Operator controlled gas fill times; Operator controlled Unit ID; AA Battery power supply; Auto temperature compensation of flow of propane; Electronic storage of spark and solenoid valve current draw for diagnostic and troubleshooting purposes.

Ability to be fired by remote controlled.

2.76. Blast Simulator – Medium: Medium Size Blast Simulator Device that is 27" tall; 600 cu in Sound Chamber; Movable arms to allow for multiple configurations and orientations;

Gas valves and high voltage components sealed in epoxy resin; Can be fired while partially submerged; Equipped with UL listed Flashback Arrestors; Spark plug located outside of main Sound Chamber for rain proof operation; Spark plug located in path of oxygen and propane gas flow into Sound Chamber; Maps of measured Blast Overpressure produced by simulated explosions; Operator controlled gas fill times; Operator controlled

Unit ID; AA Battery power supply; Auto temperature compensation of flow of propane;

Electronic storage of spark and solenoid valve current draw for diagnostic and troubleshooting purposes. Ability to be fired by remote controlled.

2.77. Blast Simulator – Large: Large Blast Simulator Device with a 1400 cu in Sound

Chamber; Recoil spring mounted Sound Chamber that can be locked in position vertically or at an angle for directed blasts; Sound Chamber permanently mounted in aluminum enclosure; Equipped with UL listed Flashback Arrestors; Maps of measured Blast

Overpressure produced by simulated explosions; Operator controlled gas fill times;

Operator controlled Unit ID; AA Battery power supply; Auto temperature compensation of flow of propane; Electronic storage of spark and solenoid valve current draw for diagnostic and troubleshooting purposes. Ability to be fired by remote controlled.

2.78. Non-Pyro Blast Simulator: Non-pyro Blast Simulator Device able to produce 111dB shockwave/sound effect that is non-fragmentation producing, utilizing Pneumatic

(compressed air or CO2) pressure of 100-150 psi and no pyrotechnics or burst discs, that is 10" in length and with a diameter of 3.5", incorporates a Schrader value attachment, is fully submersible, and can be fired remotely. Note: Operated via 12V DC input through hardwire or key fob remote (included).

2.79. Non-Pyro Blast Simulator: Non-pyro Blast Simulator Device able to produce 116dB shockwave/sound effect that is non-fragmentation producing, utilizing Pneumatic

(compressed air or CO2) pressure of 100-150 psi and no pyrotechnics or burst discs, that is 12.75" in length and with a diameter of 8.5", incorporates a Schrader value attachment, is fully submersible, and can be fired remotely. Note: Operated via 12V DC input through hardwire or key fob remote (included).

2.80. Medium Range Simulator Controller: Medium Range Blast Simulator Controller with

400m+ range, controls up to four simulators at one time, LEDs indicate simulator status, does not need to be "paired" or programmed with simulators, floats, water resistant.

2.81. Long Range Simulator Controller: Long Range Blast Simulator Controller with

600m+ range, controls up to ten blast simulators at one time, LEDs indicate simulator status, does not need to be "paired" or programmed with simulators, floats, water resistant.

Note: 915MHz, 1,000m+ range.

2.82. Simulator Master Command Controller: Blast Simulator Master Command Controller

Device with 400m+ range, Android tablet based, controls up to 16 simulators at one time, allows operator to set operating parameters for simulators such as spark duration, gas fill times, etc., controls and displays simulator locations on user downloaded map or photo, displays current draw vs time curves of simulator components for diagnostics and troubleshooting.

2.83. UAS Exploitation Kit Multi-Rotor: Multi-Rotor UAS Exploitation Kit consisting of various damaged/destroyed/crashed multirotor UASs with on board, exploitable flight data components. Each kit will include (2) small, (1) Medium and (1) Large multirotor

UAS that have suffered extensive damage, rendering them inoperable. Each exploitable

UAS will be individually packaged and separated from the other UASs and within each package, the Aircraft, Remote Control/GCS and smartphone/tablet interface must be segregated to allow users to easily select what wreckage/exploitable pieces to utilize when creating a scenario.

2.84. UAS Exploitation Kit Fixed-Wing: Fixed Wing UAS Exploitation Kit consisting of various damaged/destroyed/crashed Fixed-Wing UASs with on board, exploitable flight data components. Each kit will include (1) small, (1) Medium and (1) Large Fixed-Wing

UAS that have suffered extensive damage, rendering them inoperable. Each exploitable

UAS will be individually packaged and separated from the other UASs and within each package, the Aircraft, Remote Control/GCS and smartphone/tablet interface must be segregated to allow users to easily select what wreckage/exploitable pieces to utilize when creating a scenario.

2.85. Inert UAS "Bomblet" Ordnance Training Kit: Inert UAS Ordnance Training Kit consisting of (20ea) UAS loaded inert bomblets that are based on various ISIS 40mm bomblet designs. Bomblets must be visually accurate training aids and be capable of being dispensed from a servo powered UAS “dropper” system.

2.86. M4 5.56mm UTM Conversion Kit: Conversion Kit designed to prevent the discharge of traditional 5.56mm/.223 “live” ammunition (5.56 NATO, 5.56 x 45mm, and .223

Remington). Fail-Safe shall be achieved by utilizing an offset firing pin design, which will only work with the rim fire primer used in the UTM Cartridge, but not with a “live” center fire cartridge. In the event a 5.56mm “live” cartridge is chambered, and the trigger is pulled, the Conversions offset firing pin must strike outside the primer pocket of the

5.56mm “live” round making it impossible to detonate the “live” cartridge in the UTM converted weapon. UTM conversions must provide users with the feel and function of

“live” ammunition and be easy to install, requiring a simple exchange of the manufacturer’s Bolt and Carrier Assembly.

2.87. M9 UTM Conversion Kit: M9 UTM Conversion Kit has a unique chamber profile that will not allow “Live/Lethal” Ammunition to completely chamber therefore holding the weapon out of battery, making the weapon inoperative. The conversion must be slotted on the side, to allow the brass case of a live round to rupture in a controlled manner, dispersing gases and unburnt powder through the ejection port if all safety protocols are not followed or a round is distorted/forced into the conversion. The conversion must also provide live round lock-out for commonly used ammunition in the Law Enforcement and

Military communities with the remaining portion of uncommon rounds being dispelled with the gas dispersal safety feature to reduce incident potential.

2.88. UTM Personal Protective Equipment (PPE) Kit: Standard Personal Protective

Equipment (PPE) Kit for UTM operations includes (1) UTM Helmet, (1) Groin Protector,

(1) Helmet Neck Wrap Kit and (1) Pair of Protective gloves. The helmet must provide

180°-degree visibility, include sweatband, neck wraps and ventilation ports to aid in anti-fogging, allow observers to see and read facial expressions, allow use while wearing sunglasses or prescription eyewear, meet ANSIZ87.1 Lens standards, allow Face shield to flip up for debriefing and be CCMCK US Military Approved. The Groin Protector must be constructed of a cool mesh material. Interior panels must be constructed of durable

420D Pack Cloth and Closed Cell foam for maximum impact protection and durability and augmented with Double stitching. The Helmet Neck Wrap must include panels on the right side, left side, chin, back Velcro and include a neck wrap. The protective gloves must be made of flexible Polymer armor and nylon mesh with reinforced, leather palms.

Gloves include Velcro wrist adjustments and an unrestricted trigger finger.

2.89. Inert Military Non-Electric Blasting Cap (M-7): constructed of a pliable metal

(aluminum) in cylindrical form with a diameter of 0.24-0.26” and maximum length of

2.35”. 1 each package would contain 20 each inert training Non-Electric Blasting Caps

(M-7).

2.90. Inert Improvised Detonators: Cartridge casing (brass) from AK (7.62 short) or NATO

5.56 with Wire leads that are 18 inches and have one lead yellow and the other orange.

Cartridges are need to be filled Inert Primary Explosive powered and crimped to wires.

2.91. HME Lab Plus-up Kit: 3ea large drying tarps (12’x12’) blue/black/gray , 1ea large 2 gallon round steel coffee maker with the larger metal filter, 6ea Erlenmeyer 1000ml glass or glass chemical flasks with cork tops, 2ea natural gas Bunsen burners, 4ea Neoprene

Bunsen Burner Hoses (3ft ea) internal diameter 1/4'” and outer diameter of 7/16”, 4ea digital cooking thermometers, 2ea metal flask stands for over the Bunsen burners, 2ea

(200pcs) Craft Sticks (popsicle sticks) wooden, 4ea liquid droppers (small and large), 4ea large metal bowls (1 gallon capacity), 1ea large (5 gallon) caldron/pot with lid.

2.92. OP4 (opposition Force) Battledress Uniform Kit: Gray, Green, and Dark Blue

Standard issue (rip stop fabric) Battle Dress Uniforms (BDUs) sets. 1ea set would consist of 8ea BDU tops and 8ea BDU Trousers. Each set should be offered in sizes Extra Large, Large, and Medium.

2.93. Portable Power Station Kit: 1ea 1000Wh (2000W surge) Portable Power station

(battery) with AC adapter, Car charger cable, 2ea Solar parallel adapter cable, 2ea

1000Wh portable solar panels (foldable). Power station needs 3ea 110v/1000W outlets, 2ea USB-C and 1ea USB-A outlets, 1ea 12V outlet to meet mission needs.

2.94. IED Container Kit: PVC Piping: 6ea, 2" diameter, 36" length; PVC Piping: 6ea, 3" diameter, 36" length; PVC Piping: 6ea, 4" diameter, 36" length; PVC Piping END CAPS

(cap socket): 12ea, 2" diameter; PVC Piping END CAPS (cap socket): 12ea, 3" diameter;

PVC Piping END CAPS (cap socket): 12ea, 4" diameter; PVC Piping ELBOWS: 12ea 2" diameter; PVC Piping ELBOWS: 12ea 3" diameter; PVC Piping ELBOWS: 12ea 4" diameter; Galvanized Piping: 6ea, 1.25"diameter, 12" length, both ends threaded;

Galvanized Piping: 12ea, 1.25" diameter, 90 degree elbow; Galvanized Piping: 12ea, 1.25" diameter, external end cap; Galvanized Piping: 12ea, 1.25" diameter, internal plug fitting; 3ea Small backpack (20-30 Liter) ; 3ea Large backpack (40-50 Liter) ; 5ea Lunch boxes, plastic (personal cooler type); 5ea thermal lunch bags (minimum 16” L x 11” D x

12.5” H); 2ea Briefcase 17”L x4”D x 13”H; 2ea General purpose plastic tool box or

Fishing Tackle box; 5ea Paint can,1 gallon; 10ea 1 gallon paint can lids; 3ea Paint bucket, 5 gallon; 6ea Lid for Paint bucket 5 gallon; 2ea Ice chest/cooler 48 quart; 2ea Carry on size (18 in), luggage roller bag; 2ea Check baggage size (25” Tall or larger), luggage roller bag; 2ea Highway hazard barrel (orange/white). 10ea heavy duty Foam layer inserts;

die-cut into one inch squares.

2.95. Remote Control Car IED: remote control car with inert IED (105mm projectile) which is triggered by a key fob device. Key fob device triggers a training siren to be activated.

Components include: replica 105mm artillery projectile, an inert, replica electric detonator

/ blasting cap, simulated plastic explosives, and a modified project box (firing device), remote controller for car, remote control car battery x 2 ea, charger, and instruction manual.

2.96. ISIS improvised directional IED: Metal claymore style rounded box with rebar fragmentation welded (glued) to outside and a welded carrying handle. Inside is inert plastic explosive, improvised explosive cap and lead wires (20ft long).

2.97. “Hell Cannon” projectile: 1ea inert propane tank painted blue or OD green with attached improvised PD fusing and attached 3ft by 6” tubing from propane tank connecting improvised fins for stabilization.

2.98. IED Fragmentation FAUX (FAKE) BALL BEARINGS: 5 pounds (0.5” large) made from durable material (rubber, plastic, etc.) and has the visual appearance of steel ball bearings.

2.99. Copper EFP (Explosively Formed Penetrator) Plates: Copper, or steel plates painted to look like copper, in 2ea 4″ Cone shape, 2ea 6″ Conical shape, 1ea 8″ Conical shape, 1ea

10″ Conical shape, 1ea 12″ Conical shape. These items would be used as end pieces for metal or PVC piping.

2.100. VBIED KIT (small): simulated vehicle-borne IED (VBIED) implemented by using replica plastic explosives packed into PVC pipes as the main charge and utilizing a hard-wire command detonator. 4ea 36” L x 6” diameter PVC pipes, 8lbs inert plastic explosive C-4 (clay type), 8ea inert electric blasting caps with 12ft lead wires, 4ea rolls of duct tape, 1ea command detonator push switch with 20ft electrical wire leads incased in project box or PVC pipe with 2ea 9V batteries.

2.101. VBIED KIT (Large): 8ea 16 gallon standard steel storage drums with lids, 2ea

100Ft pieces of inert detonating cord, 1ea command detonator push switch with 20ft electrical wire leads incased in project box or PVC pipe with 2ea 9V batteries, 4ea rolls of duct tape.

2.102. 60V Cordless portable air compressor Kit: 2.5 Gallon Cordless Air compressor, Brushless motor that is oil free. No more than 25lbs in weight and has safety roll cage around unit. Unit should be powered by battery pack. 2ea (DCB609) 20V/60V MAX 9.0

Ah battery, 1ea DCB118 20V max Lithium Ion Battery Charger, 2ea 50ft 3/8"

DIAMETER, POLYURETHANE AIR HOSE WITH 1/4" NPT MALE FITTINGS, 1ea

Digital Tire Inflator with Pressure Gauge and Hose, Air Chuck with Gauge for Air

Compressor (200PSI rated), 1ea heavy gage 50ft power extension cord, 1ea power extension cord storage reel.

3. Fused Deposition Modeling (FDM): As threats develop, the Government will require training aids that may not be available commercial off the shelf (COTS). Example include parts used to build different types of IED’s, drone forensic kits restricted from purchase by

DoD regulations due to country of origin, and future items that are yet to be identified or developed. A process will be established between the Government and the Contractor to request FDM services. The Government will supply the request and in turn, the contractor will supply a quote for the service. Government will decide to proceed or not based on the quote.

4. Website Ordering Access:

4.1. Website for Online Ordering: Contractor will establish an…