Attachment 1- Salient Characteristics_THOR Equipment.docx

Salient Characteristics

F4D1R36212AW01

Thor Fiber F-8SDI-3G-120KM-TX/RX 8 Ch SD/HD/3G-SDI Over Single Fiber CWDM

1. Product Identification

· 8 Channel SD/HD/3G-SDI Over Single Fiber CWDM Transport, Rackmount

· Manufacturer: Thor Fiber (Thor Broadcast)

· Base Model / Part Number: F-8SDI-3G-TX/RX-RM (Tx & Rx kit)

· Type: Uncompressed fiber optic SDI transport system, rackmount, 1RU, 19" form factor

· Configuration: 8-channel system (standard) over a single optical fiber, CWDM

2. Functional Description

· The system shall provide uncompressed transport of up to 8 channels of SD, HD, or 3G-SDI video over a single-mode optical fiber using CWDM technology.

· The system shall consist of a matched Transmitter (TX) and Receiver (RX) kit in a rack-mount configuration.

· The system shall support Serial Digital signals up to 3.0 Gbps per channel, including but not limited to:

· 3G-SDI per SMPTE 424M

· Multi-rate DVB-ASI

· Other digital signals from 1 Mbps up to 3.0 Gbps, independent of protocol or standard

· The system shall require no user configuration or management and shall automatically adapt to any supported input signal type, bit rate, or protocol.

· The system shall pass SDI embedded audio and all ancillary data transparently.

· All SDI outputs at the receiver shall be automatically re-clocked to minimize jitter and support long coaxial cable runs.

· The system shall be suitable for applications including live broadcast, Electronic News Gathering (ENG), government, and scientific research.

3. Key Performance & Optical Characteristics

· Number of SDI Channels (Standard Configuration):

· 8x SD/HD/3G-SDI over a single optical fiber (F-8SDI-3G-TX/RX-RM)

· Optical Data Rate (per optical channel):

· Up to 4.25 Gbps (model-specific)

· Supported Electrical Data Rate (per SDI channel):

· Any Serial Digital signal from 1 Mbps up to 3.0 Gbps

· Transmission Distance Options (Model Selection):

· F-8SDI-3G-TX/RX-RM-120: up to 120 km over single-mode fiber

· Optical Wavelengths (CWDM):

· 1310 nm CWDM band:

· 1271 nm, 1291 nm, 1311 nm, 1331 nm, 1351 nm, 1371 nm, 1411 nm, 1431 nm

· 1550 nm CWDM band:

· 1471 nm, 1491 nm, 1511 nm, 1531 nm, 1551 nm, 1571 nm, 1591 nm, 1611 nm

· Optical Source:

· High-quality DFB (Distributed Feedback) laser modules, CWDM-based, for maximum reliability and distance.

· Optical Budget (typical):

· 25 dB for standard-range models

· 35 dB for long-range models

· Fiber Type and Interface:

· Single-mode fiber

· ST/PC optical connectors (standard)

4. Electrical / Video Interface Characteristics

· Supported Input Signal Type:

· Any Serial Digital signal up to 3.0 Gbps, including SD-SDI, HD-SDI, 3G-SDI, DVB-ASI, and other compatible formats.

· Input Level:

· 1.00 V peak-to-peak nominal (SDI standard)

· Input/Output Impedance:

· 75 Ohms

· Electrical Connectors:

· 75 Ohm BNC connectors for SDI inputs and outputs

· Signal Processing:

· Input equalization and re-clocking for SDI video on buffered outputs

5. Mechanical & Environmental Characteristics

· Form Factor:

· Rack-mountable, 1RU, 19" rack format

· Dimensions (L × W × H):

· 480 mm × 225 mm × 88 mm

· Weight:

· 8–15 lb, depending on configuration

· Operating Temperature Range:

· -10 °C to +55 °C

· Storage Temperature Range:

· -30 °C to +70 °C

· Humidity Range:

· 0% to 95% RH, non-condensing

6. Power Requirements

· Input Power:

· 100–240 VAC, auto-switching power supply unit (PSU)

· Power Consumption:

· 10–30 W, depending on configuration

7. Features & Operational Characteristics

· The system shall be compatible with any Serial Digital signal up to 3.0 Gbps, independent of protocol or standard.

· The system shall be available with internal optics for use with a single optical fiber (single-fiber CWDM).

· The system shall use standardized CWDM channel assignments for compatibility with other vendors’ CWDM systems, including Python™-branded systems.

· The system shall pass SDI embedded audio and all ancillary data without modification.

· The system shall provide input equalization and re-clocking on SDI outputs to reduce jitter and extend cable reach.

· The system shall support custom bi-directional configurations of SDI transport up to a total of 16 channels per fiber (e.g., combinations of TX/RX channels as listed).

· The system shall include real-time status LED indicators for:

· SDI input signal detect

· Optical link status for each channel, to support troubleshooting and monitoring.

· Internal CWDM modules shall be industry-standard for interoperability with other commercial CWDM transmitters and receivers.

8. Reliability, Warranty, and Support

· The system shall use commercial-grade, high-reliability components intended for long-term operation.

· The system shall be backed by a 5-year manufacturer warranty (Thor Fiber).

· The system shall include access to free technical support from the manufacturer.