Attachment 1 - Salient Characteristics List.pdf

Salient Characteristics:

Formal Training Unit (FTU), Low Observable Maintenance Faculty (LO)

BACKGROUND: The FTU and LO Require a Hybrid Laser system to facilitate tool room operations

OBJECTIVES: Attain a complete Laser etching and cutting system that includes a HEPA and carbon filtration system

LASER REQUIREMENTS:

Two Laser Etcher System Requirements:

• Hybrid CO2 and Fiber laser etching and cutting system to perform daily tasks.

• 80-watt CO2 laser module and a 50 Watt Fiber module.

• Minimum work area of 38" x 24" to accommodate toolbox tool layout cutting.

• A red-light pointer to facilitate tool etching at the proper location.

• Auto focus smart pin to allow multiple people to utilize the machine without in depth training.

• Laser unit must run on a standard US 115 volt 20 Amp power receptacle.

• Rotary fixture to allow etching of cylindrical objects.

• Open-Source printer driver works with all third-party drawing packages

• Dedicated Air Assist compressor to prevent overheating and damage to the laser optics.

• Honeycomb cutting table to facilitate cutting operations.

Two Fume Extraction System Requirements:

• Constructed for the rigors of fume control resulting from Lasers (Coding & Marking) Lasers (Engraving) and Inkjet Printer Fume Removal.

• Automatic electronic flow control that helps maintain a constant extraction rate even as the filter blocks.

• Contain a fume filtration unit that extracts Airborne Contaminants from the laser process and filters out hazardous particles and gas before returning clean air to the workplace.

• Pre filter to catch large debris.

• Submicronic (Commercial HEPA Filter) filtration as well as Carbon filtration system.

• Must work on a US 115 volt 20 Amp power system.

• Industrial duty stainless-steel

• Lockable industrial castors

• Include hoses and fitting for connection to laser system.

2D CAD/ Drawing Software

• 2 dimensional CAD/ Drawing Software

• Allows vector drawing, importing of SVG, DXF and image file formats.

• Allows easy layout and design of logos, text, photo quality images along with QR Codes, 2D Codes, IUID and linear Barcodes.

• Compatible with the drivers for the Laser Etcher

SOFTWARE REQUIREMENTS:

This system must include an open source printer driver that will work with all third party drawing programs and be compatible with Windows 11. This system will need to include a software license for either Corel Draw or Engravelab Laser with Photolaser plus software. The software Suits must be compatible with Windows 11 and utilize a CD/DVD to install the software.

FILTRATION REQUIREMENTS:

This system must include a Commercial Grade HEPA Filtration system that can remove 99.997% of particles down to 0.3 microns as well as utilize an activated carbon filter to remove harmful gases. This filtration unit must operate on a standard US 115 volt 20 Amp power receptacle.

TECH SUPPORT:

The purchase must include a minimum of 1 year of technical support for the software and equipment. Standard warranty of 1 year or more is required. Basic training and initial set up on how to operate the system shall be provided by the vendor.

Operational tests shall be performed before acceptance by the government.

DELIVERY: 01 August 2025