Attachment 1-Salient Characteristics EVAPCO Cooling Tower.pdf
PDF 110 KB Posted
- Attached to
- EVAPCO AT212-2H9 Cooling Towers Federal contract opportunity
- Solicitation number
- FA301626Q0034
About this file
This document is a specification sheet for a replacement cooling tower. The required equipment is an Evapco AT212-2H9 two-cell induced draft counterflow cooling tower designed as a full-featured commercial-industrial product. The cooling tower must feature type 304 stainless steel construction throughout, including upper panels with mechanical support assembly and fan screens, as well as welded basins. Each cell requires one 7½ HP inverter duty TEFC fan motor positioned outside the moist air stream with a factory-installed AEGIS shaft grounding ring.
The specification includes PVC drift eliminators maintaining drift loss at .001% of recirculating water rate, a non-corrosive SCH 40 PVC spray distribution system with non-clog nozzles, and PVC cross-fluted fill with bottom support. Air inlet louvers must feature stainless steel frames with ¾-inch openings to prevent debris entry into cold-water basins. The unit requires 8-inch BFW/Grooved end inlet and outlet connections, vibration cutout switches per motor mounted at the factory, and electric basin heaters with low water cutoff and thermostat controls (5kW per cell). The cooling tower must include an external service platform with vertical ladder and safety cage for accessing drive components, with platform and ladder shipped loose for field installation. A five-year total product warranty covering the fan motor is required. The equipment dimensions are 12' 4 7/8" W x 8' 5 ½" L x 11' 4 ¼" H.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| RFI-EVAPCO AT212-2H9 Cooling Tower (Solicitation FA301626Q0034).pdf | ||
| EVAPCO Cooling Tower JBSA Fort Sam Houston photo.pdf | ||
| Single Source Justification_EVAPCO AT212-2H9 (Cooling Tower (FA301626Q0034)_R.pdf | ||
| Cooling Tower- Lackland-Solicitation FA301625Q6106- Amendment Letter 0001.pdf | ||
| Synopsis and Solicitation - FA301626Q0034 EVAPCO Cooling Tower.pdf | ||
| Attachment 2-EVAPCO Cooling Tower SPECS.pdf | ||
| Synopsis and Solicitation - FA301626Q0034 EVAPCO Cooling Tower.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics: The Cooling Tower Brand: Evapco Model: AT212-2H9 two (2) Cell induced draft shall be an exact replacement counterflow cooling tower and a full-featured commercial-industrial product for the purpose of supporting a replacement for the current Cooling Tower. The Cooling Tower needs to have the following characteristics:
Evapco AT212-2H9 Two (2) Cells:
• All type 304 Stainless steel upper panel construction including mechanical support assembly and fan screen.
• All type 304 stainless steel basins with factory welded seams.
• One (1) – 7 ½ HP inverter duty TEFC fan motor per cell. Fan motors are located out of moist air stream. Each motor is equipped with a factory installed AEGIS shaft grounding ring.
• PVC drift eliminators with drift loss of .001% of recirculating water rate.
• Non-corrosive SCH 40 PVC Spray Distribution System with non-clog nozzles.
• PVC cross-fluted fill, totally enclosed and protected bottom supported.
• PVC air inlet louvers, with stainless steel frames, ¾ openings to prevent trash and debris from entering the cold-water basins
• End inlet connection, BFW/Grooved, 8”
• End outlet connection, BFW/Grooved, 8”
• Vibration cut out switch per motor, factory mounted for field wiring by others
• Electric basin heater with LWCO & TSTAT (5Kw per cell)
• Equalizer connections per cell, BFW/Grooved
• External Service Platform with Vertical Ladder/Safety Cage for ease of service.
Platform and ladder are shipped loose for field installation by others. Platform provides access to all drive components including fan motor.
• Five Year Total Product Warranty including Fan Motor
• Dimensions – 12’ 4 7/8” W x 8’ 5 ½” L x 11’ 4 ¼” H
File details come from the government source that posted it. Updated .