Attachment 1- Salient Characteristics 36 MXS Tube Bender.pdf
PDF 48 KB Posted
- Attached to
- 36 MXS Tube Bender
- Solicitation number
- FA524025QM115
About this file
Attachment 1 is a Requirement Description document detailing the salient characteristics for a 420 Bender System for the 36 MXS Tube Bender federal contract opportunity. The document specifies nine key requirements for the tube bending system, including:
The system must include complete sets of bend dies, clamp dies, and pressure dies, along with rod/ball mandrels. It must have the capability to hold and bend tubing up to 1.5in OD and .065in WT, with the ability to bend tubing/pipes to angles ≥180 degrees. Additional requirements include the ability to reconfigure for dual-sided bending, a mandrel clamp that can rotate 360 degrees, and inclusion of a Tool Adapter Kit and Operator's Manual. This specification is part of a pre-solicitation for the Department of the Air Force Pacific Air Forces, with the solicitation number FA524025QM115.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment 2- STATEMENT OF WORK 36 MXS Tube bender.pdf | ||
| Sources Sought 36 MXS Tube Bender.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachments:
Attachment 1 - Requirement Description with Salient Characteristics
REQUIREMENT DESCRIPTION WITH SALIENT CHARACTERISTICS
In detail, please describe those physical, functional, performance, or material element qualities of an item that are essential to ensure that the intended use of the item can be satisfactorily realized.
The 420 Bender System must have all bend die
The 420 Bender System must have all clamp dies
The 420 Bender System must have all pressure dies
The 420 Bender System must have all rod/ball mandrels
The 420 Bender System must have the ability to properly hold and bend up to 1.5in OD and .065in WT tubing
The 420 Bender System must have
The 420 Bender System must have the ability to reconfigure the machine to enable dual sided bending.
The 420 Bender System must have the ability for the mandrel clamp must be able to rotate 360 degrees.
The 420 Bender System must have the Tool Adapter Kit and Operator’s Manual with the machine
File details come from the government source that posted it. Updated .