Attachment 1_REVISED-SOW- Rolloff Truck (Mod to Increase Qty).pdf

DESCRIPTION/WORK STATEMENT/SPECIFICATION

1.0 Scope. This specification establishes the requirement for two (2) Mack MP8 Diesel

Roll-Off Trucks or equivalent of the latest model if salient characteristics can be provided to

Anniston Army Depot, Anniston, Alabama. The equipment shall be provided by the Contractor with all functionality, capabilities and features as described herein. The Contractor shall provide all resources necessary to meet the specifications, manufacture, and deliver the equipment. The

Contractor shall not proceed with any verbal or written change(s) to the scope of work from sources other than the Contracting Officer, who will provide changes in writing.

2.0 Applicable Documents.

2.1 Order of Precedence. In the event of a conflict between the text of this Equipment specification and the references cited herein, the more stringent regulation or specification shall take precedence, unless a specific exception to this, order of precedence, is noted in this

Equipment specification. Nothing in this specification, however, supersedes applicable laws and regulations unless a specific exemption has been obtained by the Government.

2.2 References. UFGS-01 35 26, Safety and Occupational Health requirements for the protection of Contractor and Government personnel, property, and resource; American National

Standards Institute (ANSI) B11/STD B11.0, standard for Safety of Machinery – General

Requirements and Risk Assessment.

International Standards Organization (ISO) 9249:2007 Earth-Moving Machinery- Engine Test

Code.

3.0 Requirements. This specification provides the requirements Rolloff Trucks shall be a product produced as the manufacturer's current production model.

3.1 General Requirements for Rolloff Trucks.

a) Axle Back Configuration

b) Engine - 425 horsepower minimum (min)

c) Engine - 1500 ft/lb of torque min

d) Engine Break

e) Allison RDS Automatic Transmission

f) Steel tandem rear fenders

g) Galbreath 60,000 lb. hoist

h) Air actuated ICC rear bumper

i) Two work lights

j) Hoist Up Alarm

k) Back up Alarm

l) Tarp System

m) Tilt Sterring Wheel

n) Aluminum wheels (front and rear)

o) Rear Differential Lock

p) Engine Block Heater

q) Heated Air Dryer included in brake system

r) Air Ride Driver Seat

s) Left Hand Fuel Tank

t) Right Hand Exhaust

u) Left Hand DEF Tank

v) Seat belts

3.2 Safety and Health Requirements.

The Equipment shall be equipped with safety devices to adequately protect the operator from all hazards/incidents to its operation. Shall include the following:

A. Door and cap locks

B. Signaling/warning horn

C. Backup alarm

3.3 Ergonomics.

The Equipment shall be ergonomically designed to prevent the occurrence of repetitive stress injuries. The Rolloff Trucks shall include an adjustable seat and tilt steering wheel.

3.4 Environmental Compliance.

The Equipment provided under this contract shall meet all applicable Environmental Protection

Agency (EPA) and Alabama Department of Environmental Management (ADEM) regulations and restrictions in effect on the date of the contract.

3.5 Maintainability and Interchangeability.

The Equipment shall be constructed using commercial off-the-shelf components to the maximum extent possible to ensure the prompt availability of repair parts. All replaceable parts shall be designed and manufactured to such standards as shall permit replacement and adjustment without the need for modification of the parts or the Equipment. All replacement parts shall be available domestically.

4.0 Acceptance

4.1 Acceptance Testing and Verification. The equipment shall be tested and verified after delivery to Anniston Army Depot.

4.2 Conformance. The Equipment shall meet the requirements of this Specification and conform to the Manufacturer’s own drawings, specifications, standards, and quality assurance practices. The Government reserves the right to, at any time during the contract period, require proof of such conformance or to inspect the Equipment to determine compliance with the requirements of this Specification.

4.3 Final Acceptance. The Government will issue a final acceptance only after the contractor successfully completes all requirements herein. Final acceptance will be at Anniston

Army Depot. Upon acceptance of all items described above, the contractor shall submit a completed DD Form 250 for signature by the government representative, as final acceptance of the equipment required by this specification (see solicitation for form & instructions).

5.0 Delivery, Handling, Storage, Installation and Training.

5.1 Delivery.

5.1.1 The Contractor shall be responsible for delivering the Equipment to the Anniston

Army Depot, 7 Frankford Avenue, Anniston, Alabama, 36201 Bldg.109.

6.0 Documentation.

6.1 Manuals. Hardcopies and Digital Copies of all manuals below are to be supplied at time of delivery of the equipment. Manuals to be included with equipment are:

A. Operators Manual- Must include all required operator instructions and safety precautions associated with the operation of the equipment.

B. Parts Manual- Must include all replacement parts diagrams and parts listing with part numbers.

C. Service Manual- Must clearly explain all preventive maintenance procedures and intervals. Also, must clearly explain troubleshooting issues/failures with possible remedies.

6.1.2 Other Documentation. In addition, any other documentation normally furnished with the Equipment shall be provided.

6.2 Language. All documentation shall be furnished in the English language only.

6.3 Government Furnished Equipment (GFE). ANAD will furnish no Government equipment to the Contractor.

6.4 Warranty. The Rolloff Trucks must be covered by the manufacturer’s minimum commercial warranty for this type of equipment and shall begin the day following Government issuance of final acceptance of the Equipment per paragraph 4.0. During the warranty period, the Contractor shall be responsible for all costs including parts and labor required to complete repairs of any defects in machine material, parts or workmanship. The warranty shall be written in Anniston Army Depot’s name.