Attachment 1 PWS.pdf
PDF 263 KB Posted
- Attached to
- SFA 38ft Yamaha Repower Federal contract opportunity
- Solicitation number
- H9224025Q0009
- Issued by
- United States Special Operations Command
About this file
This Performance Work Statement (PWS) outlines requirements for the repowering of two SFA 38ft Boats with Yamaha 300hp outboard engines for NAVSCIATTS. The contractor must remove six existing E-tec motors and install six new Yamaha 300hp outboards (specifically 2 F300XCB, 2 LF300XCB, and 2 F30UCB engines), with three engines per craft.
The scope includes installation of Yamaha electronic control stations, wire harnesses, CL5 gauge kits, and 15-1/2" x 17" stainless steel propellers. Work must be completed at the contractor's facility within 30 business days after component delivery, with the government handling vessel transportation. The contractor must comply with hazardous material regulations and provide warranty documentation. Final acceptance requires government inspection and operational testing of all outboards and associated equipment by NAVSCIATTS staff prior to pickup.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SFA 38ft Yamaha Repower QA Updated.pdf | ||
| SFA 38ft Yamaha Repower QA.pdf | ||
| H9224025Q00090001.pdf | ||
| Attachment 3 - Quote Sheet.xlsx | XLSX spreadsheet | |
| H9224025Q0009.pdf | ||
| Attachment 2 DoL WD 2015-5147 Rev 25.pdf | ||
| JA_Redacted.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
NAVSCIATTS VESSEL MAINTENANCE
PERFORMANCE WORK STATEMENT (PWS)
SFA 38 Repowering 6 Yamaha 300’s
Performance Work Statement.
1.0 Project Overview:
1.1 The contractor will provide and remove current outboards of two SFA 38ft Boats and associated hardware and install six Yamaha 300 hp outboards, to include all required hardware, gauges, and wiring on the SFA 38. Accomplishing the following installation of the engines on the SFA 38 is required to return the craft to its operational capability and readiness.
2.0 Task Description and Minimum Specifications: Replacement of six Outboards.
2.1 Remove 6 outboard E-tec motors, engine controls, oil tanks, gauges, and pumps.
2.2 Requesting 6 Yamaha 300 outboard engines to be purchased
and installed, broken down as 2 F300XCB, 2 LF300XCB, and 2 F30UCB Yamaha engines. Each craft (for a total of two craft) will have three Yamaha engines installed per craft as follows: 1 F300XCB, 1 LF300XCB, and 1 F30UCB Yamaha engine.
2.3 Install Yamaha 6 Engine shift and throttle electronic control station.
2.4 Install 6 Yamaha wire harness.
2.5 Install Yamaha CL5 Gauge kit.
2.6 Install new propellers. 15-1/2” X 17 stainless steel.
2.7 File warranty and provide all OEM documents.
3.0 Hazardous Material Use, Handling, or Disposal:
3.1 The contractor shall comply with all Federal, State, and Local laws regarding the use, handling, or disposal of hazardous materials (petroleum products, paints, coatings, etc.)
3.2 The contractor assumes all responsibility if spillage of hazardous fluids or material are to enter the marine environment.
4.0 Place of Performance
4.1 All repairs shall be done at the contractor’s facility. The government will provide delivery and pick-up of two SFA 38’s.
5.0 Vessel Acceptance:
5.1 Completion of work will be no more than 30 business days pending delivery of necessary components to facilitate repair.
5.2 The government will inspect the completion of the outlined work and conduct operational test of outboards and all associated equipment and ensure installation and operation is satisfactory prior to pick-up, by NAVSCIATTS Staff.
File details come from the government source that posted it. Updated .