Attachment 1 PWS Aerial Device Inspection.pdf
PDF 128 KB Posted
- Attached to
- Aerial Device Inspection, Test and Certification Federal contract opportunity
- Solicitation number
- N3319124Q0001
About this file
This document is a Performance Work Statement (PWS) for an Aerial Device Inspection, Test, and Certification project for the Department of the Navy Naval Facilities Engineering Command. The intent of the project is to perform the required testing and certification of the aerial devices on three Pierce ladder trucks assigned to Naval Support Activities in Naples, Italy and Rota, Spain.
The contractor shall inspect the aerial ladders, elevating platforms, and water towers for cracks, stress, and metal fatigue that could cause collapse during use, and provide a detailed report of the examination results. The contractor must conform to NFPA 1911 standards and have the appropriate safety certifications and base access. The contract is a firm-fixed-price with a 90-day period of performance. The government will evaluate quotes based on price and the contractor's capability narrative demonstrating relevant experience and technical skills. Quotes are due by the date stated in the solicitation and must acknowledge all amendments.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Pre-Bid Proposal Inquiries and Response.pdf | ||
| PPI 1 - Pictures.pdf | ||
| PIEE Submitting an Offer.pdf | ||
| Attachment 2 Provisions and Clauses.pdf | ||
| Attachment 3 Price Schedule.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PERFORMANCE WORK STATEMENT
AERIAL DEVICE INSPECTION, TEST, AND CERTIFICATION
1. Information:
The intent of this project is to perform the required testing and certification of the aerial devices on three (3) Pierce ladder trucks assigned to Naval Support Activities located in Naples Italy and Rota Spain. The exam will inspect for cracks or signs of stress and metal fatigue that could cause collapse of the ladder during use.
a. In the performance of this work the contractor shall provide all labor, material testing equipment, supervision, quality control, and safety personnel necessary to complete the work in a safe and timely manner.
b. Points of Contact:
Fire and emergency Services (F&ES) Assistant Fire Chief Joseph Ferraro Email: joseph.ferraro@eu.navy.mil Phone 314-626-8298 DSN
COMM 0039-081-568-8298
Cell +39-349-882-8833
c. Period of Performance: the contractor shall complete all work under this contract within 90 days after award.
d. The Contractor shall conform to the appropriate provisions identified in the most current edition of the National Fire Protection Association (NFPA) 1911: Standard for the Inspection, Maintenance, Testing, and Retirement of In-Service Automotive Fire Apparatus,
e. The Contractor must apply for base access and must have civil liability insurance as required at each Naval Facility.
f. All work conducted shall be in accordance with Occupational Safety and Health Administration (OSHA) regulations, National Institute for Occupational Safety and Health ( NIOSH) to include all local safety regulations and instruction appropriate for this work.
2. References:
a. All fire department aerial devices shall be inspected and tested in accordance with the most current edition of the “National Fire Protection Association (NFPA) 1911: Standards for the Inspection, Maintenance, Testing, and Retirement of In-Service Automotive Fire Apparatus” NFPA 1911 specifies minimum inspection and testing requirements and shall be used to supplement, not to replace or modify, any instruction recommended by the aerial device manufacture. Aerial devices shall include fire apparatus equipment with aerial ladders, mailto:joseph.ferraro@eu.navy.mil elevating platforms, and water towers designed to position personnel, handle materials and/or discharge water as specified in the NFPA 1911: Standard for Automotive Fire Apparatus.
3. Scope of Work:
a. Background. Aerial device is a telescoping ladder assembly that is permanently mounted and an integral part of the structural fire truck. The vehicle is a structural fire truck with pump and telescoping ladder assembly for fighting fires in multi floor buildings.
b. The contractor shall inspect all accessible steel structural weldments on each aerial ladder truck as listed for compliance with American Welding Society (AWS) Standard D1.1, “Structural Welding Code-Steel”
4. Manufacture’s Information:
a. Pierce Mfg.
5. Submittals:
a. The Contractor shall provide a detailed report containing results of the examination and test required by the NFPA 1911. Test methods are outlined in of the NFPA Standard 1911 and the UL Aerial Lift Device Examination and Test Specification.
b. Results of each test are to be considered in compliance with Standards unless comment it made to the contrary.
c. The Contractor shall document and provide a summary of non-compliance that results from this examination and test.
d. The contractor shall submit a final report documenting the results of this testing to the
Government.
6. Deliverables:
a. Upon completion of services, the Contractor shall provide documentation of all work performed in compliance with applicable manufacturer and national Fire Protection Association (NFPA), standards to include certification when required, repair records, calibration records, testing records, and out-of-service reports at a minimum. The contractor shall submit a final report no later than ten (10) working days after completion of the service in a binder to the department to include the following:
1. Contractor information and certification number
2. Areas of concerns
3. Items that are not in compliance to include photographs
4. Recommendations
b. Ladder Truck Specs:
a. Pierce 75’ Aerial ENFORCER N7400101 Naples Italy
b. Pierce 61’ TeleSquirt SKYBOOM N7440767 Naples Italy
c. Pierce 75’ Aerial IMPEL N7400139 Rota Spain
File details come from the government source that posted it. Updated .