Attachment 1 PWS A26C.pdf

FA3099-24-Q-1031

Attachment 1

PERFORMANCE WORK STATEMENT

OF HERITAGE DISPLAY AIRCRAFT

A-26C RESTORATION SERVICES

LAUGHLIN AFB, TX

Aug 07, 2024

1.0 Description of Services:

The purpose of the Heritage Aircraft Restoration Service for Laughlin AFB serves to ensure the A-26C Heritage Static Display is safely and properly configured to accurately reflect USAF history, heritage, traditions and simulate t r a i n in g in accordance with (IAW) this Performance Work Statement (PWS), AFI 84-103, Heritage Program and other applicable standards. The goals and objectives are to ensure the A-26C is inspected, cleaned, prepared, and painted and restored to operational appearances for the period depicted and does not hinder mission accomplishment or endanger students, visitors, or the environment.

1.1. Contract Support. The Contractor shall:

1.1.1 Initial Heritage Aircraft Restoration Service: Contractor shall perform restoration and painting services on A-26C listed in Appendix A. The exterior shall be thoroughly inspected and annotated. The contractor shall take minimum 5x7 i n ch digital photographs of and identify areas needing specific necessary maintenance to be performed ensuring the A-26C is restored to operational appearance. The A-26C shall be free from corrosion and properly sealed to prevent further corrosion, deterioration, and animal intrusion. Preparation to include sealing of all exposed areas shall occur prior to cleaning and painting. The contractor shall adhere to the following specifications:

1.1.1.1. Contractor shall review aircraft records in HPC’s office prior to commencing inspection/work on aircraft. In addition to accomplishing all requirements identified, contractor shall also document maintenance on the AF Form 3581, USAF Heritage Program Aerospace Vehicle Static Display Maintenance Log (LRA) IAW AFI 84-103. Contractor shall perform services listed in this section on items listed in Appendix A.

1.1.1.2 Contractor shall inspect, remove corrosion, scuff and lightly sand paint on aircraft and metal support structures to prevent metal warping prior to painting them.

1.1.1.3 Contractor shall follow T.O. 1-1-691 Cleaning and Corrosion Prevention and Control, Aerospace and Non-Aerospace Equipment (Chapter 5) when repairing and removing all corrosion from the A-26C Invader, all technical reference shall be available through the Government POC.

1.1.1.4 Contractor shall take a minimum 5x7 inch digital photograph of any portion, component, or part of the A-26C that is to be replaced prior to replacing the portion, component, or part from no more than 15 ft. away from the portion, component, or part to be replaced, prior to removing any parts. Contractor shall provide a minimum 5x7-inch digital photograph to the Government POC prior to start of work. Contractor shall provide a minimum 5x7-inch digital photograph of the completed work to the Government POC no later than one (1) business day from completion of work.

1.1.1.5 Contractor shall use Short Term Contractor Hazmat Usage Log available from the COR to submit hazardous materials and their associated Safety Data Sheets (SDS) to Ms. Frances Kwok at frances.kwok@us.af.mil , phone 830-298-5094.

1.1.1.6 Contractor shall fabricate a replacement part only as a last resort and when contractor has exhausted all other means of procuring an authentic replacement part. or equal to it, after approval from the Government

POC.

1.1.1.7 Contractor shall fabricate replacement parts to appear exactly as the original parts appeared.

mailto:frances.kwok@us.af.mil

1.1.1.8 Contractor shall fabricate windshields, if needed, and shall use a transparent thermoplastic such as Poly methyl methacrylate (PMMA) or sheet metal that is painted with Federal Standard 595 (FS595) color “17038.”

1.1.1.9 Contractor shall fabricate A-26C replacement windows, and Contractor shall use PMMA or sheet metal that is painted FS595 color “17038.”

1.1.1.10 Contractor shall install replacement windows and windshields such that water and animals cannot enter, if needed.

1.1.1.11 Contractor shall reassemble broken aircraft light lenses, if needed.

1.1.1.12 Contractor shall replace broken or missing aircraft light lenses that cannot be reassembled with matching aircraft light lenses, if needed.

1.1.1.13 Contractor shall substitute sheet metal that is cut to the appropriate shape and painted the color and shape of the original light lens for broken or missing aircraft lenses that cannot be replaced or reassembled.

1.1.1.14 Contractor shall repair holes in skin that are less than or equal to two inches (2”) wide between the two farthest point of the hole with a body filler putty.

1.1.1.15 Contractor shall repair holes in skin that are greater than two inches (2”) between the two farthest points of the hole with sheet metal.

1.1.1.16 Contractor shall contour replacement sheet metal to match the curves and shape of the A26C.

1.1.1.17 Contractor shall secure replacement sheet metal with the same number of rivets placed at the same intervals as the original sheet metal.

1.1.1.18 Contractor shall smooth and paint over hole and dent repairs on skin such that evidence of the hole or dent does not exist.

1.1.1.19 Contractor shall repair door and hatch handles on the exteriors of A26C such that the aesthetics of the aircraft are not changed, and the handle is fully functional, if needed.

1.1.1.20 Contractor shall ensure animal intrusion proofing is replaced or installed and that the color of bird proofing blends with aircraft color scheme.

1.1.1.21 Contractor shall apply clear paintable silicone sealant to exterior prior to the application of organic coatings and according to the following specifications:

1.1.1.22 Paint shall adhere to the sealant.

1.1.1.23 Water shall not enter the interior of the A26C.

1.1.1.24 Contractor shall provide written warranty for five (5) years against any and all defects in materials and workmanship in application of sealant.

1.1.1.25 Contractor shall apply clear paintable silicone sealant between all abutting pieces of metal.

1.1.1.26 Contractor shall not seal exterior doors shut.

1.1.2 Clean A26C: Contractor shall clean the A26C ensuring they are clean and free from dirt, debris, carbon, and contaminants prior to painting. Contractor shall adhere to the following specifications:

1.1.2.1. Contractor shall NOT use steam cleaning nor use high pressure spray nozzles to apply cleaning compounds onto the A26C as high pressure can cause cleaning compounds to become entrapped in enclosed areas causing corrosion. Contractor shall only apply cleaning compounds using low-pressure soap nozzles. Contractor shall not exceed the cleaner dilution ratios recommended in TO 1-1-691, Table 3-2 or applicable instruction.

1.1.2.2. Contractor shall report to the Government POC any instances of and take action to prevent leaking/dripping of Petroleum, Oil and/or Lubricant (POL) products from the exterior of the A26C.

1.1.2.3. Contractor shall report to the Government POC any leaks and clean puddles of POL products from the ground or support structure beneath the A26C caused by washing.

1.1.2.4. Contractor shall dispose of POL products that contractor removed from A26C IAW the POL product’s respective Safety Data Sheet (SDS) and current base policy.

1.1.2.5. Contractor shall remove all dirt, debris, carbon, and contaminants from the A26C exteriors during washing.

1.1.2.6. Contractor shall free all fuselage, wing, and empennage drain holes from obstruction during washing.

1.1.2.7. Contractor shall remove and dispose of bird nests and bird feces/or any kind of feces from the A26C during washing.

1.1.3 Paint : Contractor shall paint the A26C exteriors in accordance with Colors, Markings, and Indicators (CMI) provided by the Government POC. Contractor shall provide a corrosion- preventive chemical film as specified in the appropriate aircraft Technical Order (TO) to all surfaces, reassemble all components and items, apply final chemical using standard maintenance practices, IAW AFI 84-103, Heritage Program NMUSAF loan agreement, AFI 20- 114, Air and Space Equipment, Structural Maintenance, T.O. 1-1-8, Application and Removal of Organic Coating, Aerospace and Non-Aerospace Equipment, T.O. 1-1-691, Cleaning and Corrosion Prevention and Control, Aerospace and Non-Aerospace Equipment available through the museum archives which are managed by the Historical Property Custodian (HPC) at the AHTC located on JBSA-Lackland and local environmental policies and regulations.

Contractor shall adhere to the following specifications:

1.1.3.1. Contractor shall provide written warranty for five (5) years against any and all defects in material and workmanship in application and removal of organic coating.

1.1.3.2. Contractor shall NOT move the A26C in order to remove/apply organic coatings. Contractor shall provide painting aids such as scaffolding and cleanup materials and equipment, etc. Contractor shall minimize nuisance dust emissions.

1.1.3.3. Contractor shall take precautionary measures to prevent paint and paint removal waste from contaminating air, water or soil and protect vegetation and construction surrounding the A26C from foreign debris (paint chips, sealants, etc.) and over spray when removing and applying organic coating. These measures can include closure of the area, temporary fencing, and warning signs.

1.1.3.4. Contractor shall place warning signs and markings and cordon the area surrounding the A26C when removing and applying organic coating in order to protect the public, vehicles, equipment, other Heritage Display Aircraft and identifying signage from over spray and fumes. Warning signs and cordons will be placed no later than one day prior to painting in areas where over spray could affect the public, vehicles, equipment, Heritage Display Aircraft, and identifying signage. Contractor will coordinate with government POC if areas need to be closed off to the vehicles.

1.1.3.5. Contractor shall submit a Short-Term Contractor Hazmat Usage Log available from the COR to submit hazardous materials and their associated Safety Data Sheets (SDS) within five (5) business days after the completion of the A26C to report manufacturer’s name, quantities, type and location of paints used during the services to Ms.

Frances Kwok at frances.kwok@us.af.mil , phone 830-298-5094.

1.1.3.6. Contractor shall use LOW VOC coating materials (to include Paints, Primers, Thinners, Sealants, & Adhesives-items must be annotated on the container and SDSs). For any painting or staining operations. Contractor shall apply protective organic coating by spraying method unless otherwise directed by TO 1-1-8 or by local requirements or limitations and shall spray only in areas approved by Fire, Safety, and Bioenvironmental Engineering. Also, maintaining a Paint Log is required per 30 TAC 106.4.

1.1.3.7. Contractor shall prevent application of paint to surfaces other than the intended surfaces.

1.1.3.8. Contractor shall coordinate with the Government POC prior to removal of paint that the contractor applied to unintended surfaces and shall perform removal in such a manner that does not damage Government Property at no additional cost to the Government.

1.1.3.9. Contractor shall use an organic coating consisting of primer first followed by a topcoat of paint and a gloss lacquer. Any portion of the A26C without a primer coat shall get a metal etch prime for additional anti-corrosion protection. Contractor shall reference materials listed in T.O.

1-1-8 (Chapter 6) when primer is used.

1.1.3.10. Contractor shall replicate A26C paint, markings, images, letters, numbers, and colors exactly IAW CMI, unless the Government POC direct otherwise in writing, when applying paint to or replacing parts.

1.1.3.11. If the Government requires a change to A26C paint, markings, images, letters, numbers, and/or colors, the Government POC shall provide a new paint scheme approved by the Command Curator and send to the contractor no later than 30 calendar days before scheduled painting.

1.1.3.12. Contractor shall request a CMI Package from the COR/HPC prior to painting the A26C and shall schedule a meeting with the Government POC to discuss the CMI. The Government reserves the right to reject paint services that the Government deems as poor quality, including but not limited to incorrect colors, noticeable debris in paint surface, or a generally poor appearance; and/or violate historical accuracy or integrity due to failure to adhere to the CMI package.

1.1.3.13. The Government POC reserves the right to reject nose art that the Government POC deems as poor artistic quality, including but not limited to incorrect colors, lack of clarity or vividness, or a generally poor appearance; and/or violate historical accuracy or integrity due to failure to adhere to the CMI package.

2.0 General Services

2.1 Description of Services. Contractor shall meet all requirements and responsibilities in support of the A26C Heritage Aircraft Restoration. Contractor staff shall be fully trained, qualified, and knowledgeable professionals who are customer service oriented and shall ensure quality work performance IAW the PWS. Contractor shall provide a schedule of work within five (5) business days after contract award to the Government POC.

2.2. Hours of Operation. Normal duty hours are from 7:00 am – 4:00 pm Monday through Friday, excluding non-working federal holidays, Air Education & Training Command (AETC) Commander-directed “Family Days” are not federal holidays.

2.2.1 Federal Holidays: AETC follows all federally observed holidays during each work year. Down days declared by the Commander are considered duty days and are not included in the definition of a holiday. Federal Holidays are listed below:

New Year’s Day 1 January

Martin Luther King’s Birthday 3rd Monday in January

President’s Day 3rd Monday in February

Memorial Day Last Monday in May

Juneteenth Day 19 June

Independence Day 4 July

Labor Day 1st Monday in September

Columbus Day 2nd Monday in October

Veteran’s Day 11 November

Thanksgiving Day 4th Thursday in November

Christmas Day 25 December

2.3. Personnel. Contractor shall exercise management and operational control over and retain full responsibility for the performance requirements set forth in this PWS. The Government will not exercise any direct supervision over contract employees performing services under this contract.

2.3.1. Contractor shall not use the services of any person in the performance of this contract, whose presence or action endanger(s) the operational mission of the installation, and/or the safety and security of the base populace.

2.3.2 Contractor shall not employ any person who is an employee of the Department of the Air Force (military or civilian alike), nor any person whose employment would be contrary to the policies contained in AFI 64-106, “Air Force Industrial Labor Relations Activities” unless such person has received waivers for any policies restricting employment.

2.3.3 Contractor shall not employ any person who is a spouse or dependent child of a Department of Air Force employee (military or civilian alike) when such employment would create a conflict of interest or appearance of a conflict of interest.

2.3.4. Contractor acknowledges that off-duty employment of active military personnel may interfere with contractor’s ability to perform because such personnel are subject to changes in military duty hours, deployment, and temporary duty travel (TDY) and permanent change in duty station orders (PCS). The abrupt absence of these personnel shall not constitute an excuse for non- performance under this contract.

2.3.5. Contractor shall not use any illegal substances and shall comply with all installation regulations, rules, security policies, and guidelines at all times.

2.3.6. Contractor employees shall possess a current and valid U.S. driver's license for the vehicles they operate in the execution of their duties for this contract.

2.4 Contract Manager/Alternate Contract Manager. The on-site contract manager or alternate contract manager shall be responsible for the overall management and coordination of this contract and shall act as the central point of contact with the Government. The on-site contract manager or alternate shall attend meetings as determined by the Contracting Officer (CO). The on-site manager or alternate shall have full authority to act on behalf of contractor on all contract matters relating to daily operations of this contract. Contractor shall furnish in writing to the Government POC the names and phone numbers of the contract manager, the alternate, and all contract management and supervisory personnel not later than five (5) business days after contract award. Only those individuals identified by contract may serve as contract manager or alternate. Contractor shall notify the CO and the Government POC immediately in writing if changes are made to the management and supervisory personnel. Contract manager or alternate contract manager shall be present on base when contractor employees are providing contract services.

2.5 Personal Appearance. Contractor personnel shall not wear ragged or frayed apparel, tank tops, halter tops, crop tops, sleeveless shirts, mesh and see through garments, exposed clothing with obscene or advertising logos or undergarment type shirts worn as exterior clothing, gym or sweat suit apparel, or any clothing that in the judgment of the Government could present an unfavorable image or cast discredit upon the installation, its personnel or the United States Air Force (USAF).

2.6 Security Requirements.

2.6.1. Security Requirements. The contractors shall comply at all times with base security requirements to include base pass requirements.

2.6.2 Entry Requirements. The contractor shall obtain base identification and any required vehicle passes for all contractor personnel who make frequent visits to or perform work on the Air Force installation(s) cited in the contract. The contractor shall, within 3 working days after receiving award, submit a written request on company letterhead to the contracting officer listing the following: contract number, location of work site, start and stop dates, hours of required access, and names of employees and subcontractor employees requiring installation access. The letter must include the employee Name, Date of Birth, Driver License (or State issued ID) number, and State of Issuance for the purpose of background vetting. The Contracting Officer (or Contracting officer Representative) will endorse the request and submit to Security Forces for processing. Submission of late, inaccurate, or incomplete information could delay issuance of access credentials. During performance of the contract, the contractor shall be responsible for obtaining required identification for newly assigned personnel and for prompt return of credentials to the CO or the Government POC, for any employee who no longer requires access to the work site. Upon completion or termination of the contract or expiration of the identification passes, the prime contractor shall ensure that all base identification passes issued to employees and subcontractor employees are returned to the office where they were issued.

2.6.3. Traffic Laws. Contractor and employees shall comply with base traffic regulations. Use of handheld devices/phones, radar detectors, or dash-cameras are prohibited. Speed limits are strictly enforced. All large commercial vehicles must be inspected at the Commercial Vehicle Inspection area. Any sub-contractors and delivery drivers (i.e., concrete, asphalt, construction materials, etc.), must be properly sponsored by a government employee and must be credentialed prior to entry.

2.6.4. Weapons, Firearms, Ammunition. Contractor employees are prohibited from possessing weapons, firearms or ammunition, on themselves or within contractor-owned or privately-owned vehicles while on Laughlin AFB.

2.6.5. Physical Security. The contractor shall comply with Force Protection Condition (FPCON) procedures, Random Antiterrorism Measures (RAMS) and local inspection/identification requirements. The contractor shall safeguard all government property, including controlled forms, provided for contractor use. At the close of each work period, government equipment, facilities, support equipment, and other valuable materials shall be secured. Areas controlled by contractor employees shall comply with base Operations Plans/instructions.

The contractor shall safeguard all keys issued by the government and ensure they are used only by authorized contractor personnel. The contractor shall not duplicate issued keys and shall report lost keys to the contracting officer immediately. The contractor shall be charged for lost keys, re-keying, and lock replacement as applicable.

2.6.6. Anti-Terrorism. SP personnel are expected to contact Security Forces at 830-298-5100 or 911 to report any suspicious activities, packages, or items observed while conducting work on Laughlin AFB. Suspicious activities could include personnel conducting surveillance of the installation, unauthorized personnel requesting access to the installation, or somebody asking a lot of questions about the base. Personnel are subject to spot checks and inspections while on the installation. Entry into restricted/controlled areas is prohibited unless otherwise authorized. In the event of a situation on base, the Emergency Mass Warning Notification system may be activated. Personnel must follow the directions given.

2.6.6.1. All contractor personnel must complete Antiterrorism Level I Awareness Training within 30 days of requiring access, and annually thereafter. The Level I Awareness training can be accessed by the contractor personnel through the following site http://jko.jten.mil/courses/atl1/launch.html. COR's are responsible for the receipt and validation of completed AT Level I Awareness Training certificates.

2.6.6.2. Information/Industrial/Personnel Security: The Contractor/subcontractor working on classified, sensitive, and/or high-risk projects will report any suspicious activity or suspicious contacts by personnel to OSI (830-298-5158). Any person finding classified information will immediately secure it (do not open/read/ examine) and contact 47 SFS at 830-298-5100 and inform them a patrol response is necessary to take control of classified document(s)/material(s). All contracts regardless of cleared or uncleared status will be reviewed the Information Protection program provided by the 47 FTW/IP.

2.6.6.3. Prior to beginning construction, the Contractor must complete the course for Information Protection awareness for Contractors per DODM 5200.01V3-AFMAN 16-1404V3 Attachment 3, enclosure 5 . IP training may be provided to Contractor at Pre-construction meeting by the Information Protection representative.

2.6.6.4. The Contractor will appoint a Primary Security Representative and as many alternates as necessary.

The Contractor will participate and comply in the Industrial Security Program as outlined in DODM 5220.22V2_DAFMAN16-1406V2 , Industrial Security Program Management, DODM 5200.01V1-3-AFMAN 16-1404V1-3 , Information Security Program , DoDM5200.02_DAFMAN16-1405, Personnel Security Program, DODI 5200.48_DAFI1403, Controlled Unclassified Information and DD Form 254, DOD Contract http://jko.jten.mil/courses/atl1/launch.html

Security Classification Specification for classified contracts.

2.7. Environmental Protection. Contractor shall perform the requirements of this PWS IAW all applicable federal, state and local environmental protection and health laws and regulations.

2.7.1. Contractor shall submit the following to the Government POC prior to the start of services:

2.7.1.1 Provide a list of Hazardous Materials and the Safety Data Sheet (SDS) once the contract is awarded. (A hazardous material is any material that falls under 29 Code of Federal Regulations (CFR) 1910.1200) and requires a Safety Data Sheet (SDS). A list of hazardous materials is submitted to Ms. Frances Kwok at frances.kwok@us.af.mil , phone 830-298-5094. FAR Clauses in contracts are to include, FAR 52.223.3 Hazardous Material and Safety Data Sheet (SDS), FAR 52.223-5 Pollution Prevention (P2) & EPCRA (Right-to- Know Information). Need to ensure all Paints, Primers, Sealants, Adhesives, and other Coatings contain Low Volatile Organic Compounds (VOCs) in the container label and Safety Data Sheet (SDS).

2.7.2 Contractor shall remove all hazardous material (HAZMAT) that is not Government furnished from the installation at the end of the period of performance.

2.7.3. Contractor shall ensure that none of the following materials are used or brought onto Laughlin AFB, TX without the prior coordination and approval of the Government POC, or Civil Engineering (CE) designated representative such as: asbestos, paints or coatings containing mercury in excess of 200 parts per million for exterior applications or lead in excess of 0.009% lead by weight of the nonvolatile solids for exterior applications, or paint products with a date of manufacture prior to 30 Sep 1991.

2.7.4. Contractor shall ensure required chemicals utilized for painting and paint removal are properly disposed of IAW Laughlin AFB Hazardous Waste Plan. Contractor shall accomplish the disposal of materials under the direction of the Base Safety Office, Base Civil Engineer, Bioenvironmental Engineer, and Environmental Management IAW applicable directives and in a manner that will not result in violation of local, state, or federal pollution criteria. Detailed information for disposal is cited in AFI 32-1067, AFI 32- 7001, AFI 32-7041, AFI 32-7042, AFPAM 32-7043, AFI 32-7086, AFI 90-803 and AFI 91-203 and can be requested from the Government POC.

2.7.5. Contractor personnel working with Ozone Depleting Substances (ODS) shall be certified IAW the Clean Air Act. Title VI - Stratospheric Ozone Protection. The Contractor shall IMMEDIATELY report any release of an ODS to the Fire Department by calling 911. The contractor personnel calling 911 must convey that the emergency is on Laughlin AFB. No Class I or Class II Ozone Depleting Substances can used. Only Low Volatile Organic Compounds (VOCs) Paints, Thinners, Solvents, Sealants, Adhesives, and Specialty Coatings can be used.

2.7.6 Contractor shall not intentionally discharge or spill HAZMAT or substances, petroleum products, or materials of environmental concern onto the ground, asphalt, or concrete-covered surfaces, nor improperly dispose of such items at job sites.

2.7.7 Contractor shall immediately report spills over 25 gallons to the Laughlin AFB Fire Department at (830)298-5633 or 911. The contractor personnel calling 911 must convey that the emergency is on Laughlin AFB. Contractor shall provide information on the type of spilled material, amount, and location.

2.7.8 Contractor shall immediately report all spills over 5 gallons to 47 CES/CEIE Environmental Office (830) 298-5694 with the following information: date, time of incident, date and time of Fire Department notification, material/waste spilled (include SDS(s)), estimated quantity spilled, location of spill, probable cause of spill, any injuries, any containment procedures implemented and disposition of all materials/wastes spilled within five (5) working days from clean-up. The contractor personnel calling 911 must convey that the emergency is on Laughlin AFB.

2.7.9 Ensure paint, wash water and/or any material/debris generated during this activity is not dumped onto ground or allowed to enter storm drain or pollute storm water runoff.

2.10 Occupational Safety and Health. Contractor shall establish a safety and occupational health program consistent with requirements of the OSHA, Title 29 CFR. Contractor shall also provide Personnel Protective Equipment (PPE) and training consistent with applicable standards. Contractor shall comply with all national and local fire codes and policies as needed to protect USAF resources (facilities, equipment, and USAF personnel). Contractor shall notify the Government POC of any malfunctioning Government Furnished Equipment (GFE). Contractor shall immediately report all mishaps involving serious personnel injuries, fatalities, and/or Government property/equipment damage occurring on the job to the 47 FTW Safety Office at 47FTWSE.Tasker@us.af.mil. Contractor shall fully cooperate with any USAF led safety investigation and shall not disturb the mishap scene until proper officials authorize movement.

2.11 Freedom of Information Act Program (FOIA). Contractor shall comply with DOD Regulation 5400.7, “DOD Freedom of Information Act Program” requirements. The regulation sets policy and procedures for the disclosure of records to the public and for marking, handling, transmitting, and safeguarding for “For Official Use Only (FOUO) material. Contractor shall comply with AFI 33-332, “Air Force Privacy Act Program”, when collecting and maintaining information protected by the Privacy Act of 1974 authorized by Title 10, United States Code, and Section 8012.

3.0 General Information

3.1 Materials. Contractor shall perform work established IAW the Department of Defense, local forms, operating memorandum, instructions, regulations, and Technical Orders. Contractor shall obtain updated documents through local government/base electronic distribution center, the National Museum of the United States Air Force (NMUSAF), the Air Force Historical Research Agency, and Air Force E-Pubs via the Government POC.

3.2 Administrative/Office Supplies. Contractor shall supply all administrative supplies necessary to accomplish day-to-day operations.

3.3 Material Accountability. None.

3.4 Government Property Control. None

3.5 Government Provided Services. The Government will provide the services as listed in the following sub-paragraphs:

3.6 Utilities. Government will furnish utilities required for the operation of contractor provided facilities. These utilities include electricity and water. Contractor shall participate in the Government energy conservation efforts to include turning off lights and equipment not required or in use.

3.7 Publications and Forms. The Government POC will provide technical orders and other detailed directives used in performance of the contract to the contractor at start of contract. Government furnished forms will be used when applicable, unless otherwise authorized by the Government POC in writing.

3.8 Non-hazardous Refuse Collection. Contractor shall dispose of nonhazardous refuse off base.

3.9 Fire Safety: The Government will provide maintenance for pest control and grounds maintenance.

3.10 Smoking Policy. Contractor shall comply with the Air Force smoking policy as described in AFI 40-102, mailto:47FTWSE.Tasker@us.af.mil

“Tobacco Free Living” and local policies.

3.11 Recycling. Installations will make every practical effort to maximize non-hazardous solid waste and construction and demolition debris diversion from landfills or incinerators through reuse, donation, recycling, qualified recycling programs, composting and mulching, or other waste diversion activities to optimize reduction in both the volume of solid waste disposed and overall cost of non-hazardous solid waste management.

3.12 Any concrete or other recyclable/compostable debris removed must be diverted from the landfill through reuse, recycling, or composting. Quantities disposed and/or diverted must be reported to CEIE.

LIST OF APPENDICES

Appendix A – Restoration Aircraft

Appendix B – A26C Picture

Appendix C - Map of Heritage Airpark

APPENDIX A

LIST OF HERITAGE AIRCRAFT FOR RESTORATION

Heritage Aircraft Map# - 1

Heritage Aircraft Type - A-26C

Heritage Aircraft Location - North Gate Entrance

APPENDIX B

C-45J

T-34A

U-2C

F-84F

T-33A EB-57B

T-6A

26C T-28A

APPENDIX C

MAP of

Heritage Park