Attachment 1 Performance of Work Statement CAO 21 APR 25.pdf

FY25

PERFORMANCE WORK STATEMENT

FOR

Mobile Breathing Air Compressor for Schriever SFB Fire

& Emergency Services CURRENT AS OF: 21 April 2025

TABLE OF CONTENTS

1. Scope of Work 1

2. General Information 2

PERFORMANCE WORK STATEMENT

FOR

Purchase and Delivery of Mobile SCBA Fill Trailer for Schriever SFB Fire & Emergency Services

1. SCOPE OF WORK: The contractor shall provide all supplies, materials, tools, equipment, and qualified labor necessary to manufacture and deliver a Mobile Self Contained Breathing Apparatus (SCBA) Fill Trailer to include the following options: a spare tire with cover, an air hose reel with hose, lunette eye hitch, and two ASME air storage cylinders. The contractor shall comply with manufacturer’s recommendations and procedures. The service will be the sole responsibility of the contractor. An operational system shall be turned over to the Government. System shall have the ability to fill SCBA bottles at remote locations IAW NFPA 1901 (current edition).

1.1 GENERAL REQUIREMENTS: Trailer to have the following salient characteristics:

1.1.1 Trailer shall be a Type II Trailer as specified in NFPA 1901 (current edition)

1.1.2 Trailer shall meet all of the requirements of NFPA 1901 (current edition) for breathing air systems

1.1.3 Dual axle preferred

1.1.4 Trailer shall not exceed 6500 lbs

1.1.5 Must accommodate SCBA cylinders up to 31" overall length

1.1.6 Compressor low oil pressure and high temperature safety shutdowns

1.1.7 Emergency stop push button

1.1.8 Four (4) bank dual function cascade fill UL® listed control panel

1.1.9 Audible alarm on safety shutdown

1.1.10 Inlet filter maintenance indicator

1.1.11 Automatic condensation drain system

1.1.12 Minimum of two (2) 6000psi ASME Storage Cylinders

1.1.13 Multi-stage High-Pressure Recharge System

1.1.14 Air purification System

1.1.15 Spare tire with cover

1.1.16 Minimum 75 foot hose reel and interior lights

1.1.17 Lunette eye hitch

1.1.18 Provide training on operation and user maintenance

2. GENERAL INFORMATION

2.1. SECURITY REQUIREMENTS. The Contractor shall comply with all SSFB security requirements. SSFB is a controlled (restricted) area and special security procedures are utilized to deter espionage, sabotage, and theft of Air Force resources.

The Contractor shall be responsible for security of his work areas in cooperation with applicable base agencies.

2.2. VEHICLE REQUIREMENTS: The Contractor shall request, obtain, and properly use vehicle passes for all vehicles used in the performance of this contract.

2.3. TERMS OF VALIDITY: Employees without unescorted entry authority will be continuously escorted while in a restricted area by an escort official.

2.4. DISPLAY OF AREA BADGE: While inside restricted area, Contractor personnel shall, at all times, display restricted/controlled area badges on their outer garments above the waist. Contractor personnel shall remove and secure the restricted/controlled area badges immediately upon departure from the restricted area to prevent loss. Incidents of a person not properly displaying badges or violating escort procedures shall be treated as a breach of security and that person shall be susceptible to apprehension, search and detainment. Any person inside a restricted area without a restricted/controlled area badge will be detained or apprehended, searched, removed, and turned over to appropriate authorities for disposition.

2.5. CLASSIFIED INFORMATION: Access to classified information by Contractor personnel during performance of this contract is prohibited. However, Contractor performance shall be within controlled areas which shall require Contractor compliance with various levels of security and require certain established personnel security entry control procedures.

2.6. SECURITY INSPECTION: Daily entry procedures: 50th SFS personnel will verify the identity and entry authorization of each Contractor employee and vehicle, and may conduct a search of any baggage, articles, or vehicles on SSFB.

2.7. ESCORTED ENTRY: Contractor employees requiring entry, but not requiring unescorted entry, will be issued a visitor badge and will be under direct surveillance, at all times, of a person possessing a restricted/controlled area badge with escort authority. Contractor employees entering SSFB will obtain their visitor badge from the 50 SFS Entry Control Facility, Building 200. The visitor badge will be returned to the entry controller each time the employee departs SSFB controlled area. While within SSFB controlled area, Contractor personnel will display the visitor badge on their outer garment above the waist and must remain at all times within view of the escort official. Contractor personnel will need 2 forms of ID for those getting V badges.

2.8. LOST BADGES: The Contractor shall immediately report the occurrence of lost badge(s) to the QAE, who will in turn report to 50th SFS. If the QAE is not available, the loss shall be reported directly to 50th SFS within one duty day of loss.

Replacement badge will not be issued until reporting procedures are satisfactorily completed.

2.9. SECURITY COSTS: All costs incurred by the Contractor associated with security requirements, including routine entry/exit delays, and operational delays due to contingencies or exercises, are to be anticipated by the Contractor and shall be included in the price of the contract.