Attachment 1 Minimum Specification Requirements.pdf

Attachment 1 Minimum Specification Requirements

Background and Scope

This request is to purchase a Kuhn Knight BOTEC BTC 172 Feed Mixer Brand Name Or Equal to conduct feeding operations.

Required Specifications

Description Brand Name Equal (Write Equal Description)

1. Total Mixed Ration (TMR) 4-Auger Mixer

2. Capacity - 720 ft³ (+/- 75)

3. Maximum Net load - 23,700 lbs (+/- 200)

4. Number of Augers (4)

5. Overall Height - 125'' (+/- 10)

6. Overall Length - 239'' (+/- 5)

7. Overall Width - Only (No Discharge) - 96''

8. Tread Width - 96''

9. Mixer Sidewall Thickness - Right - 1/4'' to 3/16''

10. Mixer End Panel Thickness - Front and Rear - 1/4'' to 3/16''

11. Auger Hopper Thickness - 3/8'' (0.4 cm)

12. Stainless Steel Auger Bottom Liners - Full - 12 GA

13. 4-Auger Side Discharge - 36" length

14. Mixer Weighing System - Four-Point

15. Hydrostatic Drive - Front End PTO

Applicable Documents and Standards

Equipment should be shipped within standard shipment times after purchase is made.

Requirements Equipment must be a Kuhn Knight BOTEC BTC 172 Feed Mixer Brand Name Or Equal. The Feed Mixer should operate with a ration flexibility to thoroughly mix a wide range of ingredients, including high percentages of byproducts or roughages. The Feed Mixer must be able to be pulled by or attach to a NAVISTAR 2022 International 615-6X4 CAB AND CHASSIS, 64,000-80,000 LBS GVWR Truck.

Testing and Verification Upon delivery a systems check will be performed to verify function, if function is not to standard the item will be returned at vendors cost.

Data Requirements Feed Mixer must comply with all regulatory standards as well as have proper documentation of sale.

Packaging and Shipping Shipping or delivery requirements must comply with federal regulations for interstate shipments