Attachment 1 Metro Shelving Spec Sheet.pdf

InterMetro Industries Corporation North Washington Street Wilkes-Barre, PA 18705 www.metro.com

To p -Tra c k ™ H ig h -D e n sity S to ra g e S yste m s Item # ______________________________________________

Job ________________________________________________

1.12

TOP-TRACK™ HIGH-DENSITY

STORAGE SYSTEMS

for Super Erecta® and Super Adjustable Super Erecta® Systems

• Reduce Inventory Costs

• Increase Revenues

• Maximize Storage Capacity

• Increase Productivity

• Simplify Operations

• Cleaner Between Cleanings

• Maximizes Storage Capacity: Top-Track can increase the storage capacity of a given area by 30% to 40%.

Mobile units are used between stationary units. Only one aisle, which can be opened between any two units as needed, is required. The Top-Track Storage system utilizes far less aisle space and maximizes the usable storage area.

• Cost-Saving Performance: This efficient utilization of space addresses the storage needs of new or growing operations. In a new facility, less square footage would have to be dedicated to storage. In growing operations, Top-Track can eliminate the need to expand the facility to handle increasing storage requirements, greatly reducing the costs associated with a growing business’s needs.

• Improved Organization and Inventory Control:

Top-Track allows better organization of stored goods and permits improved inventory control with one-stop delivery and pick-up.

• Increased Productivity: With reduced square footage dedicated to storage, Top-Track maximizes the amount of productive “front of the house” space available, increasing daily revenues.

• Accessible: The overhead track system guides the mobile units and opens an access aisle between any two units, whenever it is needed. The open access promotes cleanliness and easy access for walking or for utility carts, simplifying the material handling task.

• Super Erecta/Super Erecta Super Adjustable: Super Erecta and Super Adjustable shelves are available in a variety of widths and lengths. Each system features ease of assembly, promotes air circulation, promotes light penetration and shelf level adjustability. Super Adjustable features shelf corners with a quick release lever. Shelves can be rapidly adjusted, without the use of tools, to meet changing storage needs. Shelves are available in Brite,™ chrome, Metroseal 3 with *Microban® built-in product protection and stainless steel.

*MICROBAN® and the MICROBAN® symbol are registered trademarks of the Microban Products Company, Huntersville, NC.

® TOP-TRACK™ HIGH-DENSITY STORAGE SYSTEMS

OVERHEAD VIEWFRONT VIEW

System Components A = Stationary End Units B = Stationary Intermediate Unit (Optional) C = Track Set D = Mobile Units E = Open Aisle

Dimensions Cat. No. Cat. No. Cat. No. Shelf Width

Stationary End Unit Kits Chrome-Plated Metroseal 3 Stainless Steel (in.) (mm)

Includes hardware necessary for connecting stationary end units to TTE18C TTE18K3 TTE18S 18 457 track. ONE KIT IS REQUIRED PER SINGLE SYSTEM. SHELVES SOLD TTE21C TTE21K3 TTE21S 21 530 SEPARATELY. 86" (2185mm) posts included. Just add shelves. TTE24C TTE24K3 TTE24S 24 610

Cat. No. Cat. No. Cat. No. Shelf Width Stationary Intermediate Unit Kits Chrome-Plated Metroseal 3 Stainless Steel (in.) (mm)

Includes hardware necessary for connecting intermediate unit to track TTA18C TTA18K3 TTA18S 18 457 on both sides. ONE KIT IS REQUIRED PER SINGLE SYSTEM. SHELVES TTA21C TTA21K3 TTA21S 21 530 SOLD SEPARATELY. 86" (2185mm) posts included. Just add shelves. TTA24C TTA24K3 TTA24S 24 610

6' 7' 8' 9' 10' 11' 12' 13' Track Sets (1830mm) (2135mm) (2440mm) (2745mm) (3050mm) (3355mm) (3660mm) (3965mm)

Includes necessary sections TTS6NA TTS7NA TTS8NA TTS9NA TTS10NA TTS11NA TTS12NA TTS13NA of track for assembling 14' 15' 16' 17' 18' 19' 20' 21' track runs of 6'–21' (4270mm) (4575mm) (4880mm) (5185mm) (5490mm) (5795mm) (6100mm) (6405mm) (1830mm–6405mm). TTS14NA TTS15NA TTS16NA TTS17NA TTS18NA TTS19NA TTS20NA TTS21NA

Cat. No. Cat. No. Cat. No. Shelf Width Mobile Unit Kits Chrome-Plated Metroseal 3 Stainless Steel (in.) (mm)

One kit required per mobile unit. Kit includes posts, casters/caster TTM18C TTM18K3 TTM18S 18 457 channels, donut bumpers, roller bearing assemblies, hardware, and TTM21C TTM21K3 TTM21S 21 530 split sleeves. SHELVES SOLD SEPARATELY. Just add shelves. TTM24C TTM24K3 TTM24S 24 610

NOTES:

1. The stationary end and intermediate units must have a minimum of four shelves.

2. The standard Top-Track™ system requires the use of 86" (2185mm) posts (i.e., 86PK3 or 86PS) on the stationary end and intermediate units. Shelves for the stationary end and intermediate units are sold separately.

3. The mobile unit kits includes special 74" (1880mm) posts with casters. Shelves for mobile units are sold separately.

4. Recommended maximum load rating for a mobile unit is 900 lbs. (400kg). Floor should be level, smooth, and free from large cracks and raised obstacles.

5. Under normal conditions, an aisle width of 30"-36" (762-914mm) is recommended. The storage of very large objects within the system, however, may require an aisle width larger than 36" (914mm).

6. A stationary intermediate unit is required when track length exceeds 21 feet (6401mm). A stationary intermediate unit may be used at the discretion of the user when track lengths are less than 21 feet (6401mm).

BA D D D E

C

AD D D E

C

C

E

D D DA B

C

E

D D D A

TOP-TRACK™ HIGH-DENSITY STORAGE SYSTEMS

OVERHEAD VIEWFRONT VIEW

System Components

Dimensions Cat. No. Shelf Width

Stationary End Unit Kits Chrome-Plated (in.) (mm)

Includes hardware necessary for connecting stationary end units in Double Deep systems and LTTE18C 18 457 connecting to an overhead track set. ONE KIT IS REQUIRED FOR ENTIRE DOUBLE DEEP LTTE21C 21 530 CONFIGURATION. SHELVES SOLD SEPARATELY. 86" (2185mm) posts included. Just add shelves. LTTE24C 24 610

Cat. No. Shelf Width Stationary Intermediate Unit Kits Chrome-Plated (in.) (mm)

Includes hardware necessary for connecting intermediate stationary end units in Double Deep systems and LTTA18C 18 457 connecting to an overhead track set on each side. ONE KIT IS REQUIRED FOR ENTIRE DOUBLE DEEP LTTA21C 21 530 CONFIGURATION. SHELVES SOLD SEPARATELY. 86" (2185mm) posts included. Just add shelves. LTTA24C 24 610

Close-up showing shelving units connected end-to-end in two Top-Track™ systems

6' 7' 8' 9' 10' 11' 12' 13' Track Sets (1830mm) (2135mm) (2440mm) (2745mm) (3050mm) (3355mm) (3660mm) (3965mm)

TTS6NA TTS7NA TTS8NA TTS9NA TTS10NA TTS11NA TTS12NA TTS13NA

14' 15' 16' 17' 18' 19' 20' 21' (4270mm) (4575mm) (4880mm) (5185mm) (5490mm) (5795mm) (6100mm) (6405mm)

TTS14NA TTS15NA TTS16NA TTS17NA TTS18NA TTS19NA TTS20NA TTS21NA

Includes necessary sections of track for assembling track runs of 6' to 21' (763-6405mm). ONLY ONE

TRACK SET IS REQUIRED

BETWEEN STATIONARY UNITS.

Cat. No. Shelf Width Mobile Unit Kits Chrome-Plated (in.) (mm)

Includes the necessary posts, casters, caster channels, donut bumpers, roller bearing LTTM18C 18 457 assemblies, and tie-together hardware to connect two mobile units together (i.e., one in LTTM21C 21 530 each system). SHELVES SOLD SEPARATELY. Just add shelves. LTTM24C 24 610

NOTES:

1. The stationary end and intermediate units must have a minimum of four shelves. For all Super Adjustable applications, the top and bottom shelves are to be non “quick adjust”

Super Erecta shelves.

2. The standard Double Deep Top-Track™ system requires the use of 86" (2185mm) posts (i.e., 86P) on the stationary end and intermediate units. Shelves for the stationary end and intermediate units are sold separately.

3. The mobile unit kit includes special 74" (1880mm) posts with casters. Shelves for mobile units are sold separately. For all Super Adjustable applications, the top and bottom shelves are to be non “quick adjust” Super Erecta shelves.

4. Under normal conditions, an aisle width of 30"-36" (762mm-914mm) is recommended. The storage of very large objects within the system, however, may require an aisle width larger than 36" (914mm).

5. Two intermediate shelving units connected end-to-end are required when the track length exceeds 21 feet (6401mm). Stationary intermediate shelving units may be used at the discretion of the user when track lengths are less than 21 feet (6401mm).

6. The maximum Double Deep system configuration is 10'7" (3202mm) (e.g., two systems, each having 60" (1525mm) for long shelves plus 6" (152mm) for Top-Track components.)

7. Ease of rollability for the mobile unit is an important consideration in evaluating Top-Track as a possible storage alternative. The floor should be level, smooth, and free from large cracks and raised obstacles. Two mobile shelving units connected end-to-end and loaded with between 800 to 1,200 lbs. (365-550kg) will require a human effort range (in lbs. of human force) of between 18-24 lbs. (8-11kg) to move the unit from a complete stop. An average person will perceive this as acceptable effort levels.

8. Mobile units should have the top shelf positioned as close as possible to the track.

A = Stationary End Units B = Stationary

Intermediate Unit (Optional)

C = Track Set D = Mobile Units E = Open Aisle

C

E

D D DA B

C

E

D D D A

BA D D D E AD D D E

C C

BA D D D E

C

AD D D E

C

To p -T ra c k H ig h -D e n si ty S to ra g e S ys te m s

L02-039 Printed in U.S.A. 8/03

Information and specifications are subject to change without notice. Please confirm at time of order.

Copyright © 2003 InterMetro Industries Corp.

® InterMetro Industries Corporation North Washington Street, Wilkes-Barre, PA 18705 Phone: 570-825-2741 • Fax: 570-825-2852 For Product Information Call: 1-800-433-2232

All Metro Catalog Sheets are available on our Web Site: www.metro.com

1.

TOP-TRACK™ HIGH-DENSITY

STORAGE SYSTEMS

Specifications

• Track: Aluminum extrusion 6063-T6.

• Joining Channel: 16 gauge galvanized steel.

• Roller Assembly: Zinc-plated steel hardware with nylon roller.

• Casters:

For applications where Brite™ or chrome finishes are acceptable: 5" (127mm) wheel with offset rigid horn, ball bearings in axle, nickel-plated, pre-lubricated.

• For applications where Metroseal 3 and stainless steel are acceptable: 5" (127mm) wheel with offset stainless steel rigid horn, stainless steel ball bearings in axle, pre-lubricated.

Workable Configurations of Mobile Units Base on Various Track Lengths and Desired Aisle Sizes Nominal Aisle Size = 30" (760mm) Nominal Aisle Size = 33" (838mm) Nominal Aisle Size = 36" (914mm)

No. Mobile Units (Note 1) Actual No. Mobile Units (Note 1) Actual No. Mobile Units (Note 1) Actual Length 18" 21" 24" Aisle Size 18" 21" 24" Aisle Size 18" 21" 24" Aisle Size of Track (457mm) (530mm) (610mm) (in.) (mm) (457mm) (530mm) (610mm) (in.) (mm) (457mm) (530mm) (610mm) (in.) (mm)

6 2 311/2 800 2 311/2 800 7 2 311/2 800 2 311/2 800 2 371/2 952 8 1 2 291/4 749 2 1 321/4 819 3 351/4 895 9 3 291/4 749 1 2 321/4 819 1 2 351/4 895

10 2 1 1 30 762 3 1 33 838 3 1 36 914 11 1 3 30 762 2 2 33 838 3 1 36 914 12 1 4 303/4 781 2 3 343/4 857 3 2 361/4 933 13 2 3 303/4 781 3 2 343/4 857 4 1 361/4 933 14 4 3 311/2 800 2 4 321/4 819 6 1 351/4 895 15 4 3 291/4 749 5 2 321/4 819 6 1 351/4 895 16 8 30 762 1 6 321/4 819 2 5 351/4 895 17 4 4 30 762 5 3 33 838 7 1 36 914 18 8 30 762 1 7 33 838 2 6 36 914 19 2 6 30 762 2 1 5 33 838 3 5 36 914 20 8 30 762 1 7 33 838 2 6 36 914 21 5 5 341/2 876 6 4 371/2 952

NOTE 1: Actual overall width of nominal 18" (457mm), 21" (530mm), and 24" (610mm) wide mobile units is 201/4" (667mm). The number of mobile units here applies to individual units in a single system, and sets of units (two mobile units tied back-to-back) in a double deep system.

NOTE 2: In confined spaces, usable space for the Top-Track installation should be determined by deducting 4" (102mm) from the overall measured space. This allows for variables such as building tolerances.

Example Selection Criteria: Actual track length required: 17'3" (5228mm). Aisle width must be in 30"-36" (762-914mm) range.

Nominal 30" (762mm) Aisle Nominal 33" (838mm) Aisle 18" 21" 24" 18" 21" 24"

Selection of Mobile Units (457mm) (530mm) (610mm) (457mm) (530mm) (610mm)

17' (5185mm) 4 4 5 3 Other selections would produce a movable aisle outside the 30"-36" (762-914mm) range.

Beyond the standard configurations mentioned above, custom Top-Track capabilities include:

• Attaching one end of the track to a wall in a single or double deep installation.

• Tying together a cluster of two mobile units (i.e., side-to-side) in a single system, or four mobile units in a double deep system.

• A taller installation up to a maximum height of 8' (2438mm) (i.e., 86" (2185mm) high posts in the stationary end units).

• Metroseal 3 and stainless steel Top-Track components for the double deep application.

• Track assemblies 6.5', 7.5' (1956, 2261mm) in length.

Contact factory for details.

Job ________________________________________________

Item # ______________________________________________

InterMetro Industries Corporation North Washington Street Wilkes-Barre, PA 18705 www.metro.com

Item # ______________________________________________

Job ________________________________________________ W ire

S h e lvin g

.01

*MicroBAN® and the MicroBAN® symbol are registered trademarks of the Microban Products company, Huntersville, Nc.

SUPEr ErEcTA SHELF®

WirE SHELviNg

• Unique Design: The open wire design of these shelves minimizes dust accumulation and allows free circulation of air, greater visibility of stored items and greater light penetration.

• Durable Construction: Super Erecta shelves and posts are constructed of heavy-gauge carbon steel or Type 304 stainless steel.

• Choice of Finishes: Super Erecta Brite™ and chrome-plated for dry storage; Metroseal 3™ with Microban® antimicrobial product protection and stainless steel for corrosive environments; and attractive epoxy color options for merchandising applications.

• Versatile: Super Erecta Shelf® wire shelving can adapt to your changing needs. By using various accessories, hundreds of shelving configurations become possible.

• Fast, Secure Assembly: SiteSelect™ Posts have a double groove visual guide feature every 8" (203mm), circular grooves at 1" (25mm) increments, and are numbered at 2" (50mm) intervals. A patented, tapered split sleeve snaps together around each post. Tapered openings in the shelf corners slide over the tapered split sleeves providing a positive lock. Shelf is assembled in minutes without the use of any special tools.

• Adjustability: Shelves can be adjusted at 1" (25mm) intervals along the entire length of the post.

• Shelf Ribs: run front to back, allowing you to slide items on and off shelves smoothly.

• Shelf Accessibility: Shelves can be loaded/unloaded easily from all sides This open construction allows maximum use of storage cube.

• Adjustable Feet: Bolt levelers compensate for surface irregularities.

Note: Stainless stationary posts are equipped with stainless steel leveling feet.

*MicroBAN® and the MicroBAN® symbol are registered trademarks of the Microban Products company, Huntersville, Nc.

SUPEr ErEcTA SHELF®

WirE SHELviNg

Wire Shelves

• Metroseal 3: Metro’s proprietary epoxy coating contains Microban® antimicrobial product protection. Microban antimicrobial protects the epoxy coating from bacteria, mold, mildew, and fungus that cause odors, stains, and product degradation.

• See spec sheet 10.14 for epoxy color options.

• Plastic split sleeves are included with each shelf replacements are available: cat. No. 9985 (bag of 4)

• Aluminum split sleeves are recommended for abusive mobile applications and autoclave applications.

cat. No. 9986Z (bag of 4 with zinc c-rings) cat. No. 9986S (bag of 4 with stainless steel c-rings)

• Load capacity (evenly distributed) per shelf Depths: 14" to 24" (355 to 610mm) 800 ibs. (363kg) for lengths of 18" to 48" (457 to 1219mm) 600 ibs. (272kg) for lengths of 54" (1370mm) or longer

• Load capacity (evenly distributed) per unit.

Stationary shelving units have a maximum load capacity (evenly distributed) of 2,000 ibs. (907kg) Mobile units have a maximum capacity of three times the caster load rating up to but not exceeding 1,000 ibs. (453kg) total. consult the Metro catalog for caster load ratings

• SUPEr ErEcTA SHELF meets government Specifications MiL-S-40144E.Aluminum Split Sleeve

Split Sleeve

Approx.

Model No. Model No. Model No. Model No. Nominal Width/Length Pkd. Wt.

Super Erecta Brite chrome Metroseal 3 with Microban® Stainless (in.) (mm) (lbs.) (kg)

1424Br 1424Nc 1424NK3 1424NS 14x24 355x610 6 2.7 1430 Br 1430Nc 1430NK3 1430NS 14x30 355x760 7 3.2 1436Br 1436Nc 1436NK3 1436NS 14x36 355x914 8 3.6 1442Br 1442Nc 1442NK3 1442NS 14x42 355x1066 91/2 4.3 1448Br 1448Nc 1448NK3 1448NS 14x48 355x1219 101/2 4.7 1460Br 1460Nc 1460NK3 1460NS 14x60 355x1524 14 6.3 1472Br 1472Nc 1472NK3 1472NS 14x72 355x1829 17 7.7 1824Br 1824Nc 1824NK3 1824NS 18x24 457x610 7 3.2 1830Br 1830Nc 1830NK3 1830NS 18x30 457x760 8 3.6 1836Br 1836Nc 1836NK3 1836NS 18x36 457x914 91/2 4.3 1842Br 1842Nc 1842NK3 1842NS 18x42 457x1066 11 5.0 1848Br 1848Nc 1848NK3 1848NS 18x48 457x1219 12 5.4 1854Br 1854Nc 1854NK3 1854NS 18x54 457x1370 141/2 6.6 1860Br 1860Nc 1860NK3 1860NS 18x60 457x1524 17 7.7 1872Br 1872Nc 1872NK3 1872NS 18x72 457x1829 20 9.1 2124Br 2124Nc 2124NK3 2124NS 21x24 530x610 8 3.6 2130Br 2130Nc 2130NK3 2130NS 21x30 530x760 9 4.1 2136Br 2136Nc 2136NK3 2136NS 21x36 530x914 11 5.0 2142Br 2142Nc 2142NK3 2142NS 21x42 530x1066 12 5.4 2148Br 2148Nc 2148NK3 2148NS 21x48 530x1219 14 6.4 2154Br 2154Nc 2154NK3 2154NS 21x54 530x1370 16 7.3 2160Br 2160Nc 2160NK3 2160NS 21x60 530x1524 18 8.2 2172Br 2172Nc 2172NK3 2172NS 21x72 530x1829 24 10.9 2424Br 2424Nc 2424NK3 2424NS 24x24 610x610 9 4.1 2430Br 2430Nc 2430NK3 2430NS 24x30 610x760 11 5.0 2436Br 2436Nc 2436NK3 2436NS 24x36 610x914 13 5.9 2442Br 2442Nc 2442NK3 2442NS 24x42 610x1066 15 6.8 2448Br 2448Nc 2448NK3 2448NS 24x48 610x1219 16 7.3 2454Br 2454Nc 2454NK3 2454NS 24x54 610x1370 19 8.6 2460Br 2460Nc 2460NK3 2460NS 24x60 610x1524 21 9.5 2472Br 2472Nc 2472NK3 2472NS 24x72 610x1829 26 11.8

Note: 14” (355mm) deep units.

Free-standing units: Foot plates should be used and secured to the floor.

Mobile units: maximum allowable post height is 54” (1370mm).

SiteSelect™ Posts Stationary Posts Stationary posts are equipped with a leveling bolt to account for uneven floors.

• Height includes leveling bolt (completely tightened) and post cap Leveling bolt can be adjusted 1/2" (13mm).

• Foot plates may be ordered separately and installed in place of leveling foot.

• replacement leveling bolts Zinc cat. No. rPF04-004 Stainless Steel cat. No. rPF04-004c

• replacement post cap for standard posts Black cat. No. rPc06-035

Model No. Approx.

Model No. Metroseal 3 Model No. Height Pkd. Wt.

chrome with Microban Stainless Steel (in.) (mm) (lbs.) (kg)

7P 73/8 187 1/2 0.3

13P 13PK3 13PS 143/8 365 1 0.5

27P 27PS 283/8 720 13/4 0.75

33P 33PK3 33PS 343/8 873 2 0.9

54P 54PK3 54PS 547/16 1382 3 1.4

63P 63PK3 63PS 627/16 1585 31/2 1.6

74P 74PK3 74PS 741/2 1892 4 1.8

86P 86PK3 86PS 861/2 2197 5 2.3

*96P 961/2 2450 51/2 2.5

*96P should not be used on units less than 24" (610mm) deep. consult Metro Engineering for alternate recommendations.

Mobile Posts (For use with Stem casters)

• Height includes post cap.

Model No. Approx.

Model No. Metroseal 3 Model No. Height Pkd. Wt.

chrome with Microban Stainless Steel (in.) (mm) (lbs.) (kg)

27UP 27UPS 273/4 704 13/4 0.75

33UP 33UPK3 33UPS 333/4 857 2 0.9

54UP 54UPK3 54UPS 5313/16 1366 3 1.4

63UP 63UPK3 63UPS 6113/16 1570 31/2 1.6

70UPK3 693/4 1771 33/4 1.7

74UP 74UPK3 74UPS 737/8 1876 4 1.8

86UP 86UPK3 86UPS 857/8 2181 41/2 2.0

Staked Posts (For use with Truck Dollies)

• Each post connects to the truck dolly through the stem receptacle. The stem receptacle is staked into the bottom of the post to ensure a durable connection in abusive mobile applications.

• Each includes a leveling/connecting bolt.

Approx.

Model No. Model No. Height Pkd. Wt.

chrome Stainless Steel (in.) (mm) (lbs.) (kg)

54P-STKD 54PS-STKD 547/16 1382 3 1.4

63P-STKD 63PS-STKD 627/16 1585 31/2 1.6

74P-STKD 74PS-STKD 741/2 1892 4 1.8

Swedged Posts (For use with Stem casters in cart Wash Applications)

• Each post has an aluminum cap swedged into the top of the post.

Approx.

Model No. Height Pkd. Wt.

Stainless Steel (in.) (mm) (lbs.) (kg)

33UPS-SW 333/4 857 2 0.9

54UPS-SW 5313/16 1366 3 1.4

63UPS-SW 6113/16 1570 31/2 1.6

SiteSelect Posts feature double grooves every 8" (203mm) to aid assembly.

Special Length Posts Special length cut posts are available. consult your Metro representative for more information.

W ir e S h e lv in g

.0

L02-006 Printed in U.S.A. rev. 11/08 information and specifications are subject to change without notice. Please confirm at time of order.

copyright © 2008 interMetro industries corp.

Super Wide Shelving

• High-density Storage: Super Wide™ shelves have a greater storage area for holding large quantities of supplies, especially large, bulky objects, providing maximum storage in minimum space.

• Load Capacity (evenly distributed) per shelf:

Depths: 30" and 36" (760 and 914mm)

600 lbs. (272kg) for lengths 48" (1219mm) or shorter.

400 lbs. (181kg) for lengths 54" (1370mm) or longer.

Model No. Approx.

Model No. Metroseal 3 Model No. Nominal Width/Length Pkd. Wt.

chrome with Microban Stainless Steel (in.) (mm) (lbs.) (kg)

3036Nc 3036NK3 3036NS 30x36 760x914 15 6.8 3048Nc 3048NK3 3048NS 30x48 760x1219 21 9.5 3060Nc 3060NK3 3060NS 30x60 760x1524 261/2 11.8 3072Nc 3072NK3 3072NS 30x72 760x1829 31 14.0 3636Nc 3636NK3 3636NS 36x36 910x914 18 8.2 3648Nc 3648NK3 3648NS 36x48 910x1219 23 10.4 3660Nc 3660NK3 3660NS 36x60 910x1524 29 13.1 3672Nc 3672NK3 3672NS 36x72 910x1829 341/2 15.4

Foot Plates

• Use to bolt units to the floor, or when a broader, more stable foot is desired. Foot plates also help to protect floors by distributing the point load of the shelving unit across a larger contact point.

• Foot plates (completely tightened) add 1/8" (3mm) to the specified heights of each stationary post on the table.

Zinc cat. No. 9993Z Stainless Steel cat. No. 9993S

“S’’ Hook

• Used to add on shelving units with only two posts required. order two per shelf level.

cat. No. 9995Z

Job ________________________________________________Job ________________________________________________

InterMetro Industries Corporation North Washington Street, Wilkes-Barre, PA 18705 Phone: 570-825-2741 Fax: 570-825-2852

All Metro Catalog Sheets are available on our Web Site: www.metro.com

For Product information:

U.S. and canada: 1.800.433.2232

Latin America: 1.561.333.3824 Europe: +31.76.587.7550

Asia/Pacific: +65.6567.8003 Middle East/Africa: +971.4.811.8286

.0

Item # ______________________________________________

InterMetro Industries Corporation North Washington Street Wilkes-Barre, PA 18705 www.metro.com

Item # ______________________________________________

Job ________________________________________________ M e tro

M a x iQ

To p -Tra c k

.2

ToP-TrAck™ HigH-DeNSiTy STorAge For MetroMax i™ and MetroMax Q

*MicroBAN® and the MicroBAN® symbol are registered trademarks of the Microban Products company, Huntersville, Nc.

• Maximizes Storage Capacity: Top-Track can increase the storage capacity of a given area by 30% to 40%.

The system allows more storage units to fit in a defined space. A movable, open aisle allows full access to each entire shelving unit thus eliminating hard to reach or “dead” spaces.

• Easy Access: The overhead track system guides the mobile units and opens an access aisle between any two units, whenever it is needed. The track is above the storage units enabling easy access for employees or for utility carts, simplifying the material handling task.

• Cost-Saving Performance: This efficient utilization of space addresses the storage needs of new or growing operations.

in a new facility, less square footage would have to be dedicated to storage. in growing operations, MetroMax Top- Track can eliminate the need to expand the facility to handle increasing storage requirements, greatly reducing the costs associated with a growing business’s needs.

• Uniquely Interchangeable: Mix and match MetroMax i™ and Q shelves and posts based on the application. Both shelf options feature removable polymer, open grid shelf mats for longer-life durability and easy cleaning. corrosion proof MetroMax i™ offers a solid shelf option and better chemical resistance. corrosion resistant MetroMax Q steel posts can improve the overall rigidity of the Top-Track system in higher weight bearing applications.

• Clean Design: guide tracks are installed overhead enabling easy cleaning of floors. MetroMax i™ and MetroMax Q shelves feature removable polymer mats. *Microban antimicrobial product protection is built into the high contact areas of the shelving systems — shelf mats, frames, and posts — to inhibit the growth of bacteria, mold, mildew, and fungus that cause odors and product degradation.

Microban product protection keeps the shelves and posts “cleaner between cleanings”.

• Increased Productivity: With reduced square footage dedicated to storage, MetroMax Top-Track maximizes the amount of productive “front of the house” space available, increasing daily revenues.

The system compensates for uneven floor surfaces. Floor should be smooth and free from large cracks or raised obstacles. Maximum load capacity for mobile units is 900 lbs. (400kg).

Roller & Associates- Seattle

MeTroMAX iQ™ ToP-TrAck™

Stationary End Unit Kit (order one per Top-Track system) kit includes the hardware and components needed to connect track sets to two stationary end units. 86" (2185mm) posts included. Shelves are ordered separately. choose from MetroMax i and MetroMax Q options.

End unit kit carton:

• Hardware: rPHDWe-TTecAP

• Footplates — 9993S (qty. 8)

• Stainless steel track support rails (qty. 4)

• Tri-lobal adapters (2 bags; each bag has 4 adapters)

Posts: 86" (2185mm) stationary posts, qty. 8

SYSTEM COMPONENTS

A = Stationary end Units B = Stationary intermediate Unit (optional) C = Track Set D = Mobile Units E = open Aisle

Intermediate Unit Kit (optional) required when track length exceeds 21' (6405mm). A stationary intermediate kit may be used at the discretion of the end user when track lengths are less than 21' (6405mm). kit includes the hardware and components needed to connect track sets to one stationary intermediate unit. 86" (2185mm) posts included. Shelves are ordered separately. choose from MetroMax i and MetroMax Q options.

Intermediate unit kit carton:

• Hardware: rPHDWe-TTecAP

• Footplates — 9993S (qty. 4)

• Stainless steel intermediate track support rails (qty. 2)

• Tri-lobal adapters (1 bag; bag contains 4 adapters)

Posts: 86" (2185mm) stationary posts, qty. 4

MetroMax i™ MetroMax Q™

Fits Shelf Width End Unit Kit End Unit Kit (in.) (mm) Model No. Model No.

18 457 MXTTe18 MQTTe18 21 530 — MQTTe21 24 610 MXTTe24 MQTTe24

MetroMax i™ end unit kit includes polymer posts (MX86P).

MetroMax Q end unit kit includes epoxy coated steel posts.

Additional replacement Parts:

Tri-lobal adapters: MTLA (4 per bag) end Unit track support rail:

rPMMAXTB-18A, rPMMAXTB-21A, rPMMAXTB-24A

MetroMax i™ MetroMax Q™

Fits Shelf Width Intermediate Unit Kit Intermediate Unit Kit (in.) (mm) Model No. Model No.

18 457 MXTTA18 MQTTA18

21 530 — MQTTA21

24 610 MXTTA24 MQTTA24

MetroMax i™ end unit kit includes polymer posts (MX86P).

MetroMax Q end unit kit includes epoxy coated steel posts.

Additional replacement Parts:

Tri-lobal adapters: MTLA (4 per bag) intermediate Unit track support rail:

rPMMAXTB-18MA, rPMMAXTB-21MA, rPMMAXTB-24MA

Mobile Unit Kit (order one per mobile unit) one kit is required per mobile unit. kit includes posts, rigid casters, caster channels, bumpers, and roller assemblies.

Shelves are sold separately. choose from MetroMax i and MetroMax Q options.

Mobile unit kit carton:

• rollers: MAXroL, bag of 4

• casters: 5" polyolefin wheel, plated or stainless horn, axle

• caster channels: Type 304 stainless, qty. 2

• Bumpers: M9992DBX, qty. 4

Posts: 74" (1890mm) stem caster mobile, qty. 4

METrOMAx i™ MOBIlE KIT METrOMAx Q™ MOBIlE UNIT KIT Fits

Shelf Width Plated Stainless Plated Stainless (in.) (mm) Model No. Model No. Model No. Model No.

18 457 MXTTM18c MXTTM18S MQTTM18c MQTTM18S 21 530 MQTTM21c MQTTM21S 24 610 MXTTM24c MXTTM24S MQTTM24c MQTTM24S

Additional replacement Parts:

caster: 5Moor (plated), 5MoorSA (stainless) caster channel: 18rS, 21rS, 24rS

Track Sets includes necessary sections of track for assembling track runs of 6' to 21' (1830-6405mm). only one track set is required between stationary units.

replacement Joining kit:

Model No. HDWe-TTJoiN

Note: TTS2.5NA includes a joining kit to connect the tracks to longer track sections.

Approx. Approx.

length Pkd. Wt. length Pkd. Wt.

Model No. (feet) (mm) (lbs.) (kg) Model No. (feet) (mm) (lbs.) (kg)

TTS2.5NA 21/2 762 15 6.8 TTS14NA 14 4267 98 44.1

TTS6NA 6 1828 40.5 18.2 TTS15NA 15 4572 106.5 47.9

TTS7NA 7 2135 47.5 21.3 TTS16NA 16 4877 113.5 51

TTS8NA 8 2440 56 25.2 TTS17NA 17 5182 121 54.4

TTS9NA 9 2743 62.5 28.1 TTS18NA 18 5486 128 51.6

TTS10NA 10 3048 69.5 31.2 TTS19NA 19 5791 135 60.7

TTS11NA 11 3353 76.5 34.4 TTS20NA 20 6096 142 63.9

TTS12NA 12 3657 83.5 37.5 TTS21NA 21 6400 149 67

TTS13NA 13 3962 92 41.4

FroNT VieW

C

E

D D DA B

C

E

D D D A oVerHeAD VieW

BA D D D E

C

AD D D E

C

C C

MeTroMAX iQ™ ToP-TrAck™

Configuration Guidelines

1. Standard Top-Track models include 86" (2185mm) stationary posts and 74" (1880mm) stem caster mobile posts. if a taller system is required, consult Metro engineering.

2. Mobile, stationary end, and intermediate units must have a minimum of 4 shelves.

3. Stationary intermediate Unit is required when the track length exceeds 21' (6405mm). intermediate kits include special support rails that attach to the overhead tracks on both sides of the intermediate unit. A stationary intermediate unit may be used at the discretion of the user when track lengths are less than 21' (6405mm) for the purpose of adding greater stability to the overall system.

4. Mobile Units: if 18" (457mm) wide mobile units are planned, the maximum allowable size shelf is 60" (1524mm) long. if 18" (457mm) wide by 60" (1524mm) long mobile units are planned, a maximum of five 18" (457mm) mobile units are allowable between two stationary units. 18" (457mm), 21" (530mm) and 24" (610mm) wide mobile units can be intermixed in a given system. The standard system requires 74" (1880mm) posts on the mobile units. recommended maximum load rating for a mobile unit is 900 lbs. (410kg).

5. Under normal conditions, an aisle of 30 to 36" (760-914mm) is recommended. The storage of very large objects within the system, however, may require an aisle width larger than 36" (914mm).

6. To accommodate bumpers, the actual size of a mobile unit is 2.5" (63.5mm) wider than the shelf width shown. For example, an 18" (457mm) wide unit is actually 20.5" (521mm).

7. To calculate the overall length of a MetroMax or MetroMax Q Top-Track System, add the following: Nominal track length + Nominal widths of each end unit + 2" (51mm).

Installation Guidelines

1. if the MetroMax i or MetroMax Q Top-Track system is to be installed for single side access with the rear of the unit against the wall, provide 5" (12.7cm) clearance between rear wall and system to allow for room variations and system dynamics.

2. Floor should be level, smooth, and free from cracks and raised objects.

3. For new construction, it is recommended that flooring of suitable durability is used in areas where Top-Track will be installed.

When such flooring is not an option, floor pad protectors are recommended to protect soft flooring materials from wear and tear.

4. enclosure panels may be used on mobile units. Panels must be mounted to ensure they do not interfere with the tracks. When using the panels that are the same height as the mobile posts, simply mount these so that the top of the panel falls below the track. or, use an enclosure panel that is one size shorter than the mobile post.

Mobile Unit — Space Calculator (Use to help determine the quantity of mobile units and the open aisle dimension)

Nominal Actual Depth Space Occupied by Each Quantity of Mobile Units Shelf Depth with Bumpers qty. 1 qty. 2 qty. 3 qty. 4 qty. 5 qty. 6 qty. 7 qty. 8 qty. 9 qty. 10 qty. 11

(in.) 18 20.5 20.5 41 61.5 82 102.5 123 143.5 64 184.5 205 225.5 (in.) 21 23.5 23.5 47 70.5 94 117.5 141 164.5 188 211.5 — — (in.) 24 26.5 26.5 53 79.5 106 132.5 159 185.5 212 — — —

(mm) 457 520.5 520.5 1041 1561.5 2082 2602.5 3123 3643.5 4164 4684.5 5205 5725.5

(mm) 530 593.5 593.5 1187 1780.5 2374 2967.5 3561 4154.5 4748 5341.5 — —

(mm) 610 673.5 673.5 1347 2020.5 2694 3367.5 4041 4714.5 5388 — — —

Interchangeable Kits

• MetroMax i™ kits include polymer posts. Polymer posts are compatible with either MetroMax i™ or MetroMax Q shelves.

• MetroMax Q kits include epoxy coated steel posts. Steel posts are compatible with either MetroMax i™ or MetroMax Q shelves.

retrofit notes — MetroMax i™

• MetroMax i™ shelves, posts, and wedges are not compatible with original MetroMax shelves, posts, and wedges manufactured prior to April 2009.

• MetroMax i™ Top-Track end and intermediate unit kits — track support rails, hardware —will fit original MetroMax.

• MetroMax i™ Top-Track mobile kit — casters, bumpers, and rollers will fit original MetroMax.

• Tri-lobal adapters that mount to post and hold the track support rails (MTLA) are NOT compatible with original MetroMax posts manufactured prior to April 2009.

retrofit notes — MetroMax Q

• MetroMax Q Top-Track end and intermediate unit kits — track support rails — can NOT be retrofitted on original MetroMax Q units manufactured prior to April 2009.

• MetroMax Q Top-Track mobile kit — casters, bumpers, rollers, and posts will fit original MetroMax Q product manufactured prior to April 2009.

Job ________________________________________________Job ________________________________________________

North Washington Street, Wilkes-Barre, PA 18705 Phone: 570-825-2741 Fax: 570-825-2852

All Metro Catalog Sheets are available on our Web Site: www.metro.com

For Product information:

U.S. and canada: 1.800.433.2232

Latin America: 1.561.333.3824 europe: +31.76.587.7550

Asia/Pacific: +65.6567.8003 Middle east/Africa: +971.4.811.8286

L02-180 Printed in U.S.A. 4/09 information and specifications are subject to change without notice. Please confirm at time of order.

copyright © 2009 interMetro industries corp.

M e tr o M a x iQ

T o p -T ra c k

MeTroMAX iQ™ ToP-TrAck™9

.2

Order Guide

1. identify the available floor space evaluate Top-Track configurations to fill the space.

The amount of space needed for the Top-Track unit is calculated by using this formula: Nominal track length + Nominal widths of each end unit + 2" (51mm).

2. choose from MetroMax i™ or Q Top Track.

choose (1) end unit kit based on shelf depth.

choose (1) track set to fill the space.

Select shelves.

3. Determine the desired open aisle space.

reference the Mobile Unit — Space calculator table on the previous page to select the depth and quantities of mobile units.

Select mobile unit kits (including finish for the casters). one needed per mobile unit.

Select shelves.

Example:

1. 196" (4979mm) of floor space 12' track + 24" end + 24" end + 2" = 194" 3657mm + 610mm + 610mm +51mm = 4928mm

Top-Track system can be assembled to fill 194” (4928mm) length of floor space.

2. end unit kit MXTTe24 (qty. 1) grid shelves MX2448g (qty. 8) Solid shelves MX2448F (qty. 2) Track Set TTS12NA (qty. 1)

3. Desired open aisle is 36" (914mm).

Tracks measure 12' or 144" (3657mm).

Available space for mobile units is:

144" – 36" = 108" (3657 – 914 = 2743mm) each nominal 24" (610mm) unit measures 26.5" (673.5mm) when you include the bumpers.

(4) 26.5" (673.5mm) deep units = 106" (2440mm)

Mobile unit kit MXTTM24c (qty. 4) grid shelves MX2448g (qty. 12) Solid shelves MX2448F (qty. 4)

Top-Track Floor Pad Protectors

• compensate for soft flooring materials by protecting the floor from normal wear and tear from mobile units.

• To make more applicable for sterile environments a bead of silicone (not included) is recommended to seal the seam between the floor pads and the floor.

• Material: aluminum

Top-Track Wall Mount Bracket Used to attach one set of tracks to the wall. eliminates the need for a stationary end unit. includes one pair of plated wall brackets. Hardware to attach the brackets to the wall is NoT included.

Model No. TTWM

Top-Track Stop Plate Kit Used in conjunction with the Wall Mount Bracket kit. The aluminum stop plates bolt to the underside of the track next to the wall brackets to prevent mobile units from bumping into the wall.

Model No. TTSTP

For Track length For Track length (feet) (mm) Model No. (feet) (mm) Model No.

6 1828 FPS6N 14 4267 FPS14N

7 2135 FPS7N 15 4572 FPS15N

8 2440 FPS8N 16 4877 FPS16N

9 2743 FPS9N 17 5182 FPS17N

10 3048 FPS10N 18 5486 FPS18N

11 3353 FPS11N 19 5791 FPS19N

12 3657 FPS12N 20 6096 FPS20N

13 3962 FPS13N 21 6400 FPS21N

TTWM

TTSTP

North Washington Street Wilkes-Barre, PA 18705 www.metro.com

To p -Tra c k

™ H ig h -D e n sity S to ra g e S yste m s Item # ______________________________________________

Job ________________________________________________

1.12

TOP-TRACK™ HIGH-DENSITY

STORAGE SYSTEMS

for Super Erecta® and Super Adjustable Super Erecta® Systems

• Reduce Inventory Costs

• Increase Revenues

• Maximize Storage Capacity

• Increase Productivity

• Simplify Operations

• Cleaner Between Cleanings

• Maximizes Storage Capacity: Top-Track can increase the storage capacity of a given area by 30% to 40%.

Mobile units are used between stationary units. Only one aisle, which can be opened between any two units as needed, is required. The Top-Track Storage system utilizes far less aisle space and maximizes the usable storage area.

• Cost-Saving Performance: This efficient utilization of space addresses the storage needs of new or growing operations. In a new facility, less square footage would have to be dedicated to storage. In growing operations, Top-Track can eliminate the need to expand the facility to handle increasing storage requirements, greatly reducing the costs associated with a growing business’s needs.

• Improved Organization and Inventory Control:

Top-Track allows better organization of stored goods and permits improved inventory control with one-stop delivery and pick-up.

• Increased Productivity: With reduced square footage dedicated to storage, Top-Track maximizes the amount of productive “front of the house” space available, increasing daily revenues.

• Accessible: The overhead track system guides the mobile units and opens an access aisle between any two units, whenever it is needed. The open access promotes cleanliness and easy access for walking or for utility carts, simplifying the material handling task.

• Super Erecta/Super Erecta Super Adjustable: Super Erecta and Super Adjustable shelves are available in a variety of widths and lengths. Each system features ease of assembly, promotes air circulation, promotes light penetration and shelf level adjustability. Super Adjustable features shelf corners with a quick release lever. Shelves can be rapidly adjusted, without the use of tools, to meet changing storage needs. Shelves are available in Brite,™ chrome, Metroseal 3 with *Microban® built-in product protection and stainless steel.

*MICROBAN® and the MICROBAN® symbol are registered trademarks of the Microban Products Company, Huntersville, NC.

® TOP-TRACK™ HIGH-DENSITY STORAGE SYSTEMS

OVERHEAD VIEWFRONT VIEW

System Components A = Stationary End Units B = Stationary Intermediate Unit (Optional) C = Track Set D = Mobile Units E = Open Aisle

Dimensions Cat. No. Cat. No. Cat. No. Shelf Width

Stationary End Unit Kits Chrome-Plated Metroseal 3 Stainless Steel (in.) (mm)

Includes hardware necessary for connecting stationary end units to TTE18C TTE18K3 TTE18S 18 457 track. ONE KIT IS REQUIRED PER SINGLE SYSTEM. SHELVES SOLD TTE21C TTE21K3 TTE21S 21 530 SEPARATELY. 86" (2185mm) posts included. Just add shelves. TTE24C TTE24K3 TTE24S 24 610

Cat. No. Cat. No. Cat. No. Shelf Width Stationary Intermediate Unit Kits Chrome-Plated Metroseal 3 Stainless Steel (in.) (mm)

Includes hardware necessary for connecting intermediate unit to track TTA18C TTA18K3 TTA18S 18 457 on both sides. ONE KIT IS REQUIRED PER SINGLE SYSTEM. SHELVES TTA21C TTA21K3 TTA21S 21 530 SOLD SEPARATELY. 86" (2185mm) posts included. Just add shelves. TTA24C TTA24K3 TTA24S 24 610

6' 7' 8' 9' 10' 11' 12' 13' Track Sets (1830mm) (2135mm) (2440mm) (2745mm) (3050mm) (3355mm) (3660mm) (3965mm)

Includes necessary sections TTS6NA TTS7NA TTS8NA TTS9NA TTS10NA TTS11NA TTS12NA TTS13NA of track for assembling 14' 15' 16' 17' 18' 19' 20' 21' track runs of 6'–21' (4270mm) (4575mm) (4880mm) (5185mm) (5490mm) (5795mm) (6100mm) (6405mm) (1830mm–6405mm). TTS14NA TTS15NA TTS16NA TTS17NA TTS18NA TTS19NA TTS20NA TTS21NA

Cat. No. Cat. No. Cat. No. Shelf Width Mobile Unit Kits Chrome-Plated Metroseal 3 Stainless Steel (in.) (mm)

One kit required per mobile unit. Kit includes posts, casters/caster TTM18C TTM18K3 TTM18S 18 457 channels, donut bumpers, roller bearing assemblies, hardware, and TTM21C TTM21K3 TTM21S 21 530 split sleeves. SHELVES SOLD SEPARATELY. Just add shelves. TTM24C TTM24K3 TTM24S 24 610

NOTES:

1. The stationary end and intermediate units must have a minimum of four shelves.

2. The standard Top-Track™ system requires the use of 86" (2185mm) posts (i.e., 86PK3 or 86PS) on the stationary end and intermediate units. Shelves for the stationary end and intermediate units are sold separately.

3. The mobile unit kits includes special 74" (1880mm) posts with casters. Shelves for mobile units are sold separately.

4. Recommended maximum load rating for a mobile unit is 900 lbs. (400kg). Floor should be level, smooth, and free from large cracks and raised obstacles.

5. Under normal conditions, an aisle width of 30"-36" (762-914mm) is recommended. The storage of very large objects within the system, however, may require an aisle width larger than 36" (914mm).

6. A stationary intermediate unit is required when track length exceeds 21 feet (6401mm). A stationary intermediate unit may be used at the discretion of the user when track lengths are less than 21 feet (6401mm).

BA D D D E

C

AD D D E

C

C

E

D D DA B

C

E

D D D A

TOP-TRACK™ HIGH-DENSITY STORAGE SYSTEMS

OVERHEAD VIEWFRONT VIEW

System Components

Dimensions Cat. No. Shelf Width

Stationary End Unit Kits Chrome-Plated (in.) (mm)

Includes hardware necessary for connecting stationary end units in Double Deep systems and LTTE18C 18 457 connecting to an overhead track set. ONE KIT IS REQUIRED FOR ENTIRE DOUBLE DEEP LTTE21C 21 530 CONFIGURATION. SHELVES SOLD SEPARATELY. 86" (2185mm) posts included. Just add shelves. LTTE24C 24 610

Cat. No. Shelf Width Stationary Intermediate Unit Kits Chrome-Plated (in.) (mm)

Includes hardware necessary for connecting intermediate stationary end units in Double Deep systems and LTTA18C 18 457 connecting to an overhead track set on each side. ONE KIT IS REQUIRED FOR ENTIRE DOUBLE DEEP LTTA21C 21 530 CONFIGURATION. SHELVES SOLD SEPARATELY. 86" (2185mm) posts included. Just add shelves. LTTA24C 24 610

Close-up showing shelving units connected end-to-end in two Top-Track™ systems

6' 7' 8' 9' 10' 11' 12' 13' Track Sets (1830mm) (2135mm) (2440mm) (2745mm) (3050mm) (3355mm) (3660mm) (3965mm)

TTS6NA TTS7NA TTS8NA TTS9NA TTS10NA TTS11NA TTS12NA TTS13NA

14' 15' 16' 17' 18' 19' 20' 21' (4270mm) (4575mm) (4880mm) (5185mm) (5490mm) (5795mm) (6100mm) (6405mm)

TTS14NA TTS15NA TTS16NA TTS17NA TTS18NA TTS19NA TTS20NA TTS21NA

Includes necessary sections of track for assembling track runs of 6' to 21' (763-6405mm). ONLY ONE

TRACK SET IS REQUIRED

BETWEEN STATIONARY UNITS.

Cat. No. Shelf Width Mobile Unit Kits Chrome-Plated (in.) (mm)

Includes the necessary posts, casters, caster channels, donut bumpers, roller bearing LTTM18C 18 457 assemblies, and tie-together hardware to connect two mobile units together (i.e., one in LTTM21C 21 530 each system). SHELVES SOLD SEPARATELY. Just add shelves. LTTM24C 24 610

NOTES:

1. The stationary end and intermediate units must have a minimum of four shelves. For all Super Adjustable applications, the top and bottom shelves are to be non “quick adjust”

Super Erecta shelves.

2. The standard Double Deep Top-Track™ system requires the use of 86" (2185mm) posts (i.e., 86P) on the stationary end and intermediate units. Shelves for the stationary end and intermediate units are sold separately.

3. The mobile unit kit includes special 74" (1880mm) posts with casters. Shelves for mobile units are sold separately. For all Super Adjustable applications, the top and bottom shelves are to be non “quick adjust” Super Erecta shelves.

4. Under normal conditions, an aisle width of 30"-36" (762mm-914mm) is recommended. The storage of very large objects within the system, however, may require an aisle width larger than 36" (914mm).

5. Two intermediate shelving units connected end-to-end are required when the track length exceeds 21 feet (6401mm). Stationary intermediate shelving units may be used at the discretion of the user when track lengths are less than 21 feet (6401mm).

6. The maximum Double Deep system configuration is 10'7" (3202mm) (e.g., two systems, each having 60" (1525mm) for long shelves plus 6" (152mm) for Top-Track components.)

7. Ease of rollability for the mobile unit is an important consideration in evaluating Top-Track as a possible storage alternative. The floor should be level, smooth, and free from large cracks and raised obstacles. Two mobile shelving units connected end-to-end and loaded with between 800 to 1,200 lbs. (365-550kg) will require a human effort range (in lbs. of human force) of between 18-24 lbs. (8-11kg) to move the unit from a complete stop. An average person will perceive this as acceptable effort levels.

8. Mobile units should have the top shelf positioned as close as possible to the track.

A = Stationary End Units B = Stationary

Intermediate Unit (Optional)

C = Track Set D = Mobile Units E = Open Aisle

C

E

D D DA B

C

E

D D D A

BA D D D E AD D D E

C C

BA D D D E

C

AD D D E

C

To p -T ra c k

H ig h -D e n si ty S to ra g e S ys te m s

L02-039 Printed in U.S.A. 8/03

Information and specifications are subject to change without notice. Please confirm at time of order.

Copyright © 2003 InterMetro Industries Corp.

® InterMetro Industries Corporation North Washington Street, Wilkes-Barre, PA 18705 Phone: 570-825-2741 • Fax: 570-825-2852 For Product Information Call: 1-800-433-2232

All Metro Catalog Sheets are available on our Web Site: www.metro.com

1.

TOP-TRACK™ HIGH-DENSITY

STORAGE SYSTEMS

Specifications

• Track: Aluminum extrusion 6063-T6.

• Joining Channel: 16 gauge galvanized steel.

• Roller Assembly: Zinc-plated steel hardware with nylon roller.

• Casters:

For applications where Brite™ or chrome finishes are acceptable: 5" (127mm) wheel with offset rigid horn, ball bearings in axle, nickel-plated, pre-lubricated.

• For applications where Metroseal 3 and stainless steel are acceptable: 5" (127mm) wheel with offset stainless steel rigid horn, stainless steel ball bearings in axle, pre-lubricated.

Workable Configurations of Mobile Units Base on Various Track Lengths and Desired Aisle Sizes Nominal Aisle Size = 30" (760mm) Nominal Aisle Size = 33" (838mm) Nominal Aisle Size = 36" (914mm)

No. Mobile Units (Note 1) Actual No. Mobile Units (Note 1) Actual No. Mobile Units (Note 1) Actual Length 18" 21" 24" Aisle Size 18" 21" 24" Aisle Size 18" 21" 24" Aisle Size of Track (457mm) (530mm) (610mm) (in.) (mm) (457mm) (530mm) (610mm) (in.) (mm) (457mm) (530mm) (610mm) (in.) (mm)

6 2 311/2 800 2 311/2 800 7 2 311/2 800 2 311/2 800 2 371/2 952 8 1 2 291/4 749 2 1 321/4 819 3 351/4 895 9 3 291/4 749 1 2 321/4 819 1 2 351/4 895

10 2 1 1 30 762 3 1 33 838 3 1 36 914 11 1 3 30 762 2 2 33 838 3 1 36 914 12 1 4 303/4 781 2 3 343/4 857 3 2 361/4 933 13 2 3 303/4 781 3 2 343/4 857 4 1 361/4 933 14 4 3 311/2 800 2 4 321/4 819 6 1 351/4 895 15 4 3 291/4 749 5 2 321/4 819 6 1 351/4 895 16 8 30 762 1 6 321/4 819 2 5 351/4 895 17 4 4 30 762 5 3 33 838 7 1 36 914 18 8 30 762 1 7 33 838 2 6 36 914 19 2 6 30 762 2 1 5 33 838 3 5 36 914 20 8 30 762 1 7 33 838 2 6 36 914 21 5 5 341/2 876 6 4 371/2 952

NOTE 1: Actual overall width of nominal 18" (457mm), 21" (530mm), and 24" (610mm) wide mobile units is 201/4" (667mm). The number of mobile units here applies to individual units in a single system, and sets of units (two mobile units tied back-to-back) in a double deep system.

NOTE 2: In confined spaces, usable space for the Top-Track installation should be determined by deducting 4" (102mm) from the overall measured space. This allows for variables such as building tolerances.

Example Selection Criteria: Actual track length required: 17'3" (5228mm). Aisle width must be in 30"-36" (762-914mm) range.

Nominal 30" (762mm) Aisle Nominal 33" (838mm) Aisle 18" 21" 24" 18" 21" 24"

Selection of Mobile Units (457mm) (530mm) (610mm) (457mm) (530mm) (610mm)

17' (5185mm) 4 4 5 3 Other selections would produce a movable aisle outside the 30"-36" (762-914mm) range.

Beyond the standard configurations mentioned above, custom Top-Track capabilities include:

• Attaching one end of the track to a wall in a single or double deep installation.

• Tying together a cluster of two mobile units (i.e., side-to-side) in a single system, or four mobile units in a double deep system.

• A taller installation up to a maximum height of 8' (2438mm) (i.e., 86" (2185mm) high posts in the stationary end units).

• Metroseal 3 and stainless steel Top-Track components for the double deep application.

• Track assemblies 6.5', 7.5' (1956, 2261mm) in length.

Contact factory for details.