Attachment 1-Fence Statement of Work.pdf
PDF 38 KB Posted
- Attached to
- Fencing Material Federal contract opportunity
- Solicitation number
- W911KF-24-Q-0055
About this file
This document is a Statement of Work (SOW) for a chain link fence fabric and related materials procurement. The SOW provides detailed technical requirements for the fence fabric, posts, accessories, and gate assembly, including material specifications and dimensions.
The related federal contract opportunity is a solicitation (W911KF-24-Q-0055) issued by the Department of the Army Materiel Command Contracting Command Detroit Arsenal for fencing materials to be used at the Anniston Army Depot. This is a 100% Small Business Set Aside procurement under NAICS code 331222. The solicitation will be issued electronically, and proposals must be submitted electronically by 10:00 AM CST on October 1, 2024. Questions are due by September 23, 2024 at 10:00 AM CST. The Point of Contact is Crystal Hodges.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| W911KF24Q0055 Amendment 0001.pdf | ||
| Attachment 4-Pre-registration Workflow.pdf | ||
| Attachment 2-Evidence of Authority.pdf | ||
| W911KF24Q0055 Released.pdf | ||
| Attachment 3-Request Technical Literature.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Chain Link Fence Fabric:
• Provide ASTM A491, aluminum-coated steel wire. Fabricate fence fabric of 9 gauge wire woven in 2 inch diamond mesh.
Posts:
• Provide posts conforming to ASTM F1083, zinc-coated. Group IA High Strength steel pipe.
Use line posts and terminal (corner, gate, and pull) posts of the same designation throughout the fence. Provide gate post for the gate type specified subject to the limitation specified in ASTM F900 or ASTM F1184.
Accessories:
• Provide truss rods (with turnbuckles or other means of adjustment) for each terminal post.
• Provide barbed wire supporting arms of the 45 degree outward angle 3-strand arm type and of the design required for the post furnished. Secure arms by bolting.
• Furnish post caps in accordance with manufacturer's standard accessories with coating matching that of fence posts.
• Provide 9 gauge tie wire for attaching fabric to rails, braces, and posts and match the material and coating of the fence fabric. Use tie wires for attaching fabric to tension wire on high security fences made from 16 gauge stainless steel. Provide double loop tie wires 6.5 inches in length.
Chain Link Braces:
• ASTM F1083, zinc-coated, Group IA High Strength, steel pipe, size NPS 1-1/4.
Gate Assembly:
• Provide gate assembly conforming to ASTM F900 and/or ASTM F1184. Provide gate frames conforming to strength and coating requirements of ASTM F1083 for Group IA High Strength, steel pipe, nominal pipe size (NPS) 1-1/2. Use gate fabric that matches the specified chain link fabric.
Gate Leaves:
• For gate leaves, more than 8 feet wide, provide either intermediate members and diagonal truss rods or tubular members as necessary to provide rigid construction, free from sag or twist. For gate leaves less than 8 feet wide, provide truss rods or intermediate braces.
Provide intermediate braces on all gate frames with an electro-mechanical lock. Attach fabric to the gate frame by method standard with the manufacturer. Welding is not an acceptable method for attaching fabric to gate frames.
Gate Hardware and Accessories:
• Furnish and install latches, hinges, stops, keepers, rollers, and other hardware items as required for the operation of the gate. All items are required to match the material characteristics of the fence system being installed. Provide hinge with stainless steel pin.
Arrange latches for padlocking so that the padlock will be accessible from both sides of the gate. Provide stops for holding the gates in the open position. For high security applications, extend each end member of gate frames sufficiently above the top member to carry three strands of barbed wire in horizontal alignment with barbed wire strands on the fence.
Coating for steel latches, stops, hinges, keepers, and accessories, must be galvanized.
File details come from the government source that posted it. Updated .