Attachment 1 - FA524024QM061 Salient Characteristics.xlsx
XLSX spreadsheet 26 KB Posted
- Attached to
- RFQ – 36 LRS – Vehicle Maintenance Training Aids
- Solicitation number
- FA524024QM061
About this file
This document is an attachment to a Request for Quote (RFQ) for Vehicle Management Training Aids. The RFQ seeks two types of training aids: a Lighting & Electronic Ignition System Training Aid with Alternator and an ABS Braking System Training Aid. Detailed salient characteristics for each training aid are provided. The RFQ is issued by the Department of the Air Force Pacific Air Forces for delivery to Andersen Air Force Base in Guam. Responses to the RFQ must be received by 10 July 2024 at 1:00 PM Chamorro Standard Time. The solicitation number is FA524024QM061.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Fill In Yellow Tables
| Requirements List | ||
| Commerical Items: | Response Deadline: | Contractor: |
| 36 LRS – Vehicle Management Training Aids | 10 JULY 2024 at 1:00 PM Chamorro Standard Time (ChST) | |
| Quote Total Amount: | Solicitation Number: | |
| $ - 0 | FA524024QM061 |
| Items | Price | Additional Information Needed | ||||||
| CLIN | Description | Quantity | Unit of Issue | Unit Price | Extended Price | Standard Warranty? (Yes/No/NA) | Manufacturer | Part Number |
| 0001 | Lighting & Electronic Ignition System Training Aid with Alternator (Must meet Salient Characteristics below) | 1 | Each | $ - 0 | ||||
| 0002 | ABS Braking System Training Aid (Must meet Salient Characteristics below) | 1 | Each | $ - 0 | ||||
| 0003 | Shipment and Delivery to AAFB, GU | 1 | Each | $ - 0 | ||||
| GRAND TOTAL | $ - 0 | |||||||
| Salient Characteristics required for Vehicle Management Training Aids | ||||||||
| 1. | Electrical Panel for Lighting and Ignition |
Characteristics needed: Training aid needs to be mobile with wheels attached to the training board. It needs to have rear and front headlight assemblies attached to the board with pin out points for voltage testing. It needs to include a charging system in the form of an alternator and battery. Needs to have high and low beam buttons, four-way warning lights button, reverse lights button, brake lights button, and signal lights buttons. Will also include an emergency stop button that can shutdown the training aid down in case of an emergency. It needs to have an ignition coil wired to a distributor cap with four spark plugs. Under the distributor cap there will be a rotating handle to allow for electrical charge build up that will be sent to the spark plugs to simulate the ignition phase of an internal combustion engine.
2. ABS Braking System Panel Characteristics needed: Training aid needs to have two solid disk brake cut aways with mounted wheel speed sensors on both disk brakes. Disk brakes will include brake calipers with brake pads attached on the rotors. Will include a cutaway servo brake booster with a brake pedal attached, a cutaway ABS pump, and an ABS control module with an electronic control unit. It needs to have color coded wires and lines going from the abs pump, and abs control module respectively. Finally, it needs a diagram located on the training aid that highlights and labels all major components of the system.
File details come from the government source that posted it. Updated .