Attachment 1 - Drawings of Record.xlsx
XLSX spreadsheet 24 KB Posted
- Attached to
- NSWCPD Pulper and Shredder Processing Equipment Federal contract opportunity
- Solicitation number
- N64498-23-RFPREQ-PD-33-0175
About this file
This file contains drawings and specifications for solid waste shredders and pulpers used for processing equipment. It includes over 100 engineering drawings for the mechanical, electrical, and structural components of various shredder and pulper models. The drawings provide details for items like electrical schematics, component assemblies, material specifications, fabrication instructions, and maintenance procedures. Also included is a pre-solicitation notice for a forthcoming solicitation from the Department of the Navy for pulper and shredder processing equipment. The solicitation number provided is N64498-23-RFPREQ-PD-33-0175 and will be issued by the Naval Sea Systems Command. The pre-solicitation does not include any other information such as response dates, pricing terms, or set-asides.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Attachment 6 ModI-LargePulperEE_FabInsp.docx | DOCX document | |
| Attachment 4 SmallPulper_FabInsp.docx | DOCX document | |
| Attachment 3 ModI-MGShredder_FabInsp.docx | DOCX document | |
| Attachment 2 ModI-LargePulper_FabInsp.docx | DOCX document | |
| Attachment 5 ModI-PShredder_FabInsp.docx | DOCX document | |
| Attachment 7 SmallPulperEE_FabInsp.docx | DOCX document | |
| DRAFT SOW_PULP-SHRED HARDWARE.doc | DOC document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SWS
| This list summarizes the major changes made to each drawing after 05 June 2023. It is not intended to be a detailed |
| explanation of the revision. Refer to the drawing revision block for the specific details. If there is a conflict between this list and the drawing |
| revision block, the drawing revision block takes precedence. |
| DWG NO. | REV | TITLE | REMARKS |
| 8729170 | B | Mod 1 Solid Waste Shredder Mk III Electrical Schematic | No Change |
| 8729171 | D | Mod 1 Solid Waste Shredder Mk III Electrical Enclosure Assembly and Details | No Change |
| 7556866 | A | Mod 1 Solid Waste Shredder Feed Hopper Flange Cover Details | No Change |
| 7556870 | B | Mod 1 Solid Waste Shredder Cutters, Spacers, Seals and Shafts (3 Sheets) | No Change |
| 7556871 | E | Mod 1 Solid Waste Shredder Chamber Assembly (8 Sheets) | No Change |
| 7556873 | K | Mod 1 Solid Waste Shredder Top Level Assembly (4 Sheets) | No Change |
| 6960880 | K | Solid Waste Shredder Interface Drawing (4 sheets) | No Change |
| 6960885 | K | Solid Waste Shredder Frame & Hard Mount Assembly & Details (5 Sheets) | No Change |
| 6960887 | L | Solid Waste Shredder Collection Area Door, Details (4 Sheets) | No Change |
| 6960891 | V | Solid Waste Shredder Right-Angle Speed Reducer, Assembly & Details (12 Sheets) | No Change |
| 6960894 | G | Solid Waste Shredder Drive Belt Tensioner, Assembly & Details (2 Sheets) | No Change |
| 6960898 | L | Solid Waste Shredder Belt Guard, Assembly & Details (4 Sheets) | No Change |
| 6960899 | R | Solid Waste Shredder Electrical System, Arrangement (3 Sheets) | No Change |
| 6960903 | E | Solid Waste Shredder Coupling Guard, Details (1 Sheet) | No Change |
| 6960928 | T | Solid Waste Shredder Blast-Resistant Feed Hopper Assembly & Details (9 Sheets) | No Change |
| 6960929 | M | Solid Waste Shredder Blast-Resistant Collection Area Enclosure Assembly & Details (8 Sheets) | No Change |
| Conversion or Overhaul Drawings | |||
| 7556874 | D | PWP Mod. 1 - Plastics Shredder Conversion Instructions | No Change |
| 6960955 | - | Solid Waste Shredder Cutter Shaft Refurbishment Procedure | No Change |
&"Arial,Bold"EXECUTIVE SUMMARY
SOLID WASTE SHREDDER DRAWING LIST
30 May 2012 Page &P of &N
&F
SP Mod I - Mech
| This list summarizes the major changes made to each drawing after 05 June 2023. It is not intended to be a detailed | ||||
| explanation of the revision. Refer to the drawing revision block for the specific details. If there is a conflict between this list and the drawing | ||||
| revision block, the drawing revision block takes precedence. | ||||
| DWG NO. | REV | TITLE | REMARKS | |
| 8930060 | -- | SP Mod 1 Interface Drawing | No Change | |
| 8930061 | -- | SP Mod 1 Inataller Provided Components | No Change | |
| 8930062 | -- | SP Mod 1 Control Valve Assembly | No Change | |
| 8930063 | -- | SP Mod 1 Top Level Conversion | No Change | |
| 8930064 | -- | SP Mod 1 Top Level Assembly | No Change | |
| 8930065 | -- | SP Mod 1 Drive Assembly | No Change | |
| 8930066 | -- | SP Mod 1 Splined Drive Shaft | No Change | |
| 8930067 | -- | SP Mod 1 Splined Impeller Assembly | No Change | |
| 8930068 | -- | SP Mod 1 Splined Impeller Details | No Change | |
| 8930069 | -- | SP Mod 1 One-Piece Impeller Ear | No Change | |
| 8930070 | -- | SP Mod 1 One-Piece Ear Gasket | No Change | |
| 8930071 | -- | SP Mod 1 Door Latch Assembly | No Change | |
| 8930072 | -- | SP Mod 1 Feed Chute Assembly & Details | No Change | |
| 8930073 | -- | SP Mod 1 Flow Switch Adapter | No Change | |
| 8930074 | -- | SP Mod 1 Name and Label Plates | No Change | |
| 8930075 | -- | SP Mod 1 Electrical System Installation Drawing | No Change | |
| BASELINE SMALL PULPER DRAWINGS THAT MAY BE USED IN MOD 1 FABRICATION | ||||
| DWG NO. | REV | TITLE | REMARKS | |
| 6960502 | F | Local Status Indicator (2 Sheets) | No Change | |
| 6960581 | W | Top Level Assembly (9 Sheets) | No Change | |
| 6960584 | R | Piping Details (7 Sheets) | No Change | |
| 6960585 | J | Feed Chute Assembly and Details | ||
| (6 Sheets) | No Change | |||
| 6960586 | F | Drive Assembly (2 Sheets) | No Change | |
| 6960587 | J | Drive Housing Machining (2 Sheets) | No Change | |
| 6960589 | E | Drive Lip Seal Holder and Flinger | ||
| (1 Sheet) | No Change | |||
| 6960590 | D | Drive Gaskets and Shims (1 Sheet) | No Change | |
| 6960591 | H | Drive Shaft (1 Sheet) | No Change | |
| 6960592 | D | Drive End Cap (1 Sheet) | No Change | |
| 6960593 | D | Drive Mechanical Seal Plate (1 Sheet) | No Change | |
| 6960594 | N | Tank Assembly (7 Sheets) | No Change | |
| 6960595 | J | Frame Assembly and Details | ||
| (3 Sheets) | No Change | |||
| 6960596 | G | Junkbox Basket (1 Sheet) | No Change | |
| 6960597 | D | Junkbox Flange (1 Sheet) | No Change | |
| 6960598 | F | Impeller Assembly (1 Sheet) | No Change | |
| 6960599 | F | Impeller Machining (2 Sheets) | No Change | |
| 6960601 | G | Cutter Ear Machining (2 Sheets) | No Change | |
| 6960603 | E | Cutter Ear Blades (1 Sheet) | No Change | |
| 6960604 | J | Security Ring Assembly (2 Sheets) | No Change | |
| 6960605 | F | Security Ring Weldment (2 Sheets) | No Change | |
| 6960606 | F | Stationary Block and Blades (1 Sheet) | No Change | |
| 6960609 | J | Drive Motor (2 Sheets) | No Change | |
| 6960614 | L | Miscellaneous Component Details | ||
| (3 Sheets) | No Change | |||
| 6960619 | B | Belt Tensioner (1 Sheet) | No Change | |
| 6960621 | G | Drive Guards (1 Sheet) | No Change | |
| 6960624 | B | Tensioner Idler Shaft (1 Sheet) | No Change | |
| 6960625 | D | Tensioner Idler Pulley (1 Sheet) | No Change | |
| 6960640 | F | Tank Bottom Casting Weldment/ | ||
| Machining (3 Sheets) | No Change | |||
| 6960652 | P | Alternative Vendor List (3 Sheets) | No Change | |
| 6960676 | D | Small Pulper Tank Bottom Casting/ Machining (3 Sheets) | No Change | |
| 6960677 | A | Mechanical Seal (1 Sheet) | No Change |
&"Arial,Bold"EXECUTIVE SUMMARY
SMALL PULPER MECHANICAL DRAWING LIST
20 JUNE 2011 Page &P of &N
&F
Pulper Electrical
| This list summarizes the major changes made to each drawing after 05 June 2023. It is not intended to be a detailed |
| explanation of the revision. Refer to the drawing revision block for the specific details. If there is a conflict between this list and the drawing |
| revision block, the drawing revision block takes precedence. |
| DWG NO. | REV | TITLE | REMARKS |
| 8729160 | C | Pulper Mk III Electrical Schematic and Wiring Diagram (5 Sheets) | No Change |
| 8729161 | B | Pulper Mk III Electrical Control Enclosure Assembly (10 Sheets) | No Change |
| Legacy Pulper Drawings: | ||||
| 6960368 | C | Pushbutton, Flush Head, Black | No Change | |
| 6960500 | N | Pulper Electrical Control Enclosure | ||
| Arrangement (11 Sheets) | No Change | |||
| 6960501 | G | PLC Electrical Schematic & Wiring Diagram (5 Sheets) | No Change | |
| 6960504 | G | PLC Electrical System Installation | ||
| (3 Sheets) | No Change | |||
| 6960505 | -- | Pulper Conductivity Switch Relay (MTR1) Retrofit Kit | No Change | |
| 6960611 | E | Pulper Proximity Switch (1 Sheet) | No Change | |
| 6960617 | A | Pulper PB, Mushroom Head, Red | No Change | |
| 6960633 | E | Conductivity Switch (2 Sheets) | No Change | |
| 6960634 | C | Conductivity Switch Controller | ||
| (1 Sheet) | No Change | |||
| 6960645 | B | Relay, Plug-In (1 Sheet) | No Change | |
| 6960646 | B | Socket, Plug-In Relay (1 Sheet) | No Change | |
| 6960648 | B | Alarm (1 Sheet) | No Change | |
| 6960651 | D | Hour Meter (1 Sheet) | No Change | |
| 6960656 | F | PLC Ladder Logic Diagram (75 Sheets) | No Change | |
| 6960657 | E | PLC Display Unit Logic Diagram | ||
| (17 Sheets) | No Change | |||
| 6960660 | F | Message Display Unit (1 Sheet) | No Change | |
| 6960661 | C | Current Transducer, XDCR (2 Sheets) | No Change | |
| 6960662 | C | PLC Output Module (1 Sheet) | No Change | |
| 6960663 | C | PLC Baseplate (1 Sheet) | No Change | |
| 6960664 | B | Pushbutton, Extended, Red, 2nd | ||
| (1 Sheet) | No Change | |||
| 6960665 | D | Ammeter, Sectioned Scale (1 Sheet) | No Change | |
| 6960666 | B | Filter, Power Line | No Change | |
| 6960667 | C | PLC Input Module (1 Sheet) | No Change | |
| 6960668 | B | Pushbutton, Flush Head, Green, 2nd | No Change | |
| 6960669 | C | PLC Power Supply (1 Sheet) | No Change | |
| 6960670 | C | PLC Analog Input Module (1 Sheet) | No Change | |
| 6960672 | C | PLC Analog Output Module (1 Sheet) | No Change | |
| 6960673 | D | Message Display Cable Assembly | ||
| (1 Sheet) | No Change | |||
| 6960674 | C | PLC Filler Module (1 Sheet) | No Change | |
| 6960879 | R | Nameplates and Hazard Plates | ||
| (5 Sheets) | No Change |
&"Arial,Bold"EXECUTIVE SUMMARY
PULPER ELECTRICAL CONTROLLER DRAWING LIST
30 May 2012 Page &P of &N
&F
LP Mod I - Mech
| This list summarizes the major changes made to each drawing after 05 June 2023. It is not intended to be a detailed |
| explanation of the revision. Refer to the drawing revision block for the specific details. If there is a conflict between this list and the drawing |
| revision block, the drawing revision block takes precedence. |
| DWG NO. | REV | TITLE | REMARKS |
| 8729126 | B | Large Pulper Mod 1 - Interface Drawing | No Change |
| 8729127 | C | Large Pulper Mod 1 - Installer Provided Components | No Change |
| 8729128 | A | Large Pulper Mod 1 - Control Valve Assembly | No Change |
| 8729129 | C | Large Pulper Mod 1 - Top Level Conversion Assembly | No Change |
| 8729130 | C | Large Pulper Mod 1 - Top Level Assembly | No Change |
| 8729131 | A | Large Pulper Mod 1 - Drive Assembly | No Change |
| 8729132 | - | Large Pulper Mod 1 - Splined Drive Shaft | No Change |
| 8729133 | A | Large Pulper Mod 1 - Splined Impeller Assembly | No Change |
| 8729134 | A | Large Pulper Mod 1 - Splined Impeller Details | No Change |
| 8729135 | - | Large Pulper Mod 1 - One-Piece Impeller Ear | No Change |
| 8729136 | A | Large Pulper Mod 1 - Belt Tensioner Details | No Change |
| 8729137 | D | Large Pulper Mod 1 - Door Latch Assembly and Details | No Change |
| 8729138 | A | Large Pulper Mod 1 - Lower Shell Assembly | No Change |
| 8729139 | - | Large Pulper Mod 1 - Junkbox Assembly | No Change |
| 8729140 | A | Large Pulper Mod 1 - Upper Shell Assembly | No Change |
| 8729141 | C | Large Pulper Mod 1 - Impeller Lifting Fixture Installation and Details | No Change |
| 8729143 | C | Large Pulper Mod 1 - Name and Label Plates | No Change |
| 8729144 | - | Large Pulper Mod 1 - One Piece Ear Gasket | No Change |
| 8729145 | - | Large Pulper Mod 1 - Flow Switch Adapter | No Change |
| 8729150 | C | Large Pulper Mod 1 - Electrical Schematic and Wiring Diagram | No Change |
| 8729151 | C | Large Pulper Mod 1 - Electrical System Installation | No Change |
| 8729152 | E | Large Pulper Mod 1 - Electrical Enclosure Assembly and Details | No Change |
| 8729153 | D | Large Pulper Mod 1 - Electrical Enclosure Conversion | No Change |
| 8729154 | - | Large Pulper Mod 1 - Local Status Indicator | No Change |
| BASELINE LARGE PULPER DRAWINGS THAT MAY BE USED IN MOD 1 FABRICATION | |||
| 6960302 | L | Large Pulper, Rail Weldment | No Change |
| 6960303 | H | Large Pulper, Frame Weldment | No Change |
| 6960304 | E | Large Pulper, Guard, Side Frame | No Change |
| 6960305 | J | Large Pulper, Guard, Belt Drive | No Change |
| 6960306 | G | Large Pulper, Idler Arm Assembly | No Change |
| 6960307 | E | Large Pulper, Junkbox Gasket | No Change |
| 6960308 | G | Large Pulper, Tension Rod Cover and U-Bolt | No Change |
| 6960309 | E | Large Pulper, Security Ring Gasket | No Change |
| 6960311 | N | Large Pulper, Slurry Chamber | No Change |
| 6960319 | J | Large Pulper, Security Ring | No Change |
| 6960321 | H | Large Pulper, Lower Shell Weldment | No Change |
| 6960322 | H | Large Pulper, Door, Access | No Change |
| 6960323 | D | Large Pulper, Gasket, Access Door | No Change |
| 6960324 | K | Large Pulper, Access Door Bar Weldment and Details | No Change |
| 6960326 | D | Large Pulper, Torsion Spring Details | No Change |
| 6960327 | C | Large Pulper, Gasket, Shell Flange | No Change |
| 6960329 | C | Large Pulper, Gasket, Drive Flange | No Change |
| 6960331 | K | Large Pulper, Bearing Housing Details | No Change |
| 6960335 | K | Large Pulper, Junkbox | No Change |
| 6960336 | G | Large Pulper, Door Bar, Junkbox | No Change |
| 6960337 | H | Large Pulper, Door, Junkbox | No Change |
| 6960338 | H | Large Pulper, Junkbox Basket | No Change |
| 6960339 | D | Large Pulper, Gasket, Junkbox Door | No Change |
| 6960344 | H | Large Pulper, Impeller Blade and Security Ring Blade | No Change |
| 6960347 | D | Large Pulper, Seawater Orifice Plates and Screen | No Change |
| 6960348 | H | Large Pulper, Brackets | No Change |
&"Arial,Bold"EXECUTIVE SUMMARY
LARGE PULPER MECHANICAL DRAWING LIST
30 MAY 2012 Page &P of &N
&F
File details come from the government source that posted it. Updated .