Attachment 1.pdf

*** LTC PID Packaging Consolidated Text ***

PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM

DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN:014130080

PROPELLER SHAFT WITH UNIVERSAL JOINT,VEHICULAR

REFERENCE NUMBER:RD005

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:CS187

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:CS120

REFERENCE NUMBER:CS147

REFERENCE NUMBER:ZD087

REFERENCE NUMBER:ZD064

-SQAPCARCLTPHOS81361

-QAP12447114

REFERENCE NUMBER:ZL006

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RT001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ017

Attachment #1 SPE7LX-26-R-0074 PID, Packaging, and Marking

REFERENCE NUMBER:RQ042

REFERENCE NUMBER:CS060

REFERENCE NUMBER:CQAID

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:IS001

REFERENCE NUMBER:RQ018

REFERENCE NUMBER:ZD025

FIRST ARTICLE TESTING 1. FIRST ARTICLE APPROVAL-CONTRACTOR TESTING:

First Article Approval- Contractor Testing shall be performed in accordance with drawing 12447114 and QAP 12447114. Samples shall be as follows: PN,,Nomenclature,,FAT Samples,,Consumed in Testing 12447114,, Driveshaft Assy, Front,,,,4,,,,3,,,,,, 2. For the purpose of clarification of this document, the terminology "First Article" shall replace "INITIAL PRODUCTION INSPECTION" in all applicable specifications and/or drawings referenced herein.

3. The First Article Test Report (FATR) shall be compiled by the contractor in the contractor's own format. The FATR shall document the results of all inspections and tests (including supplier and vendor inspection records and certifications, when applicable). The FATR shall include actual inspections and test results to include all measurements, recorded test data, and certifications (as applicable) keyed to each drawing, specification, SQAP, QAR, QAP requirement and identified as such. The FATR shall contain sufficient narrative content, technical data, illustrations or photographic evidence, and an objective determination by the contractor to allow the designated Government representative to determine that the First Article Test was successfully completed.

CRITICAL APPLICATION ITEM

AM GENERAL LLC 34623 P/N 12447114

DANA DRIVESHAFT MANUFACTURING, LLC 6CH03 P/N 915805-2803

TDP Rev B Gen 2

IAW BASIC DRAWING NR 19207 12447114

REVISION NR C DTD 06/22/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 10899391

REVISION NR A DTD 02/17/1977

IAW REFERENCE QAP 19207 12447114

REVISION NR A DTD 09/05/2012

IAW REFERENCE DRAWING NR 19207 12369003

REVISION NR J DTD 06/30/2018

IAW REFERENCE DRAWING NR 19207 12447114

REVISION NR DTD 06/24/2022

IAW REFERENCE DRAWING NR 19207 12447114

REVISION NR A DTD 08/24/1995

IAW REFERENCE QAP 16236 SQAPCARCLTPHOS81361

REVISION NR DTD 12/01/2017

IAW REFERENCE QAP 16236 CDRL-81361CARPH-17272

PREP FOR DELIVERY

LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PRESERVATION, PACKAGING, AND PACKING SHALL BE IN ACCORDANCE WITH SPECIAL

PACKAGING INSTRUCTION (SPI) AK14130080, REVISION A, DATED 08/24/1995.

NOTE: CONTRACTOR MUST HAVE A COPY OF PAGE 2 OF ARMY SPECIAL PACKAGING

INSTRUCTION (SPI AK 14130080) FOR REQUIRED CUSHIONING & PACKING OF

MATERIAL.

QUALITY ASSURANCE PROVISIONS:

1. PRESERVATIVE MATERIAL = ZZ: THE GREASE ON THE UNIVERSAL JOINTS AND

SPLINES SHALL NOT BE CLEANED UNLESS CONTAMINATION HAS OCCURRED. IF

GREASE IS NOT PRESENT OR HAS BEEN REMOVED DURING THE CLEANING PROCESS,

GREASE SHALL BE APPLIED TO THE UNIVERSAL JOINTS AND SPLINES AS

NECESSARY.

2. PLACE WRAP OVER BOTH ENDS OF SHAFT AND SECURE WRAPS USING TAPE.

3. FOLLOW ARMY SPI AND ILLUSTRATION ON PAGE 2 TO FABRICATE AND CUSHION

MATERIAL.

4. PER ARMY SPI REQUIREMENT, TWO BOXES REQUIRED.

4(a). UNIT CONTAINER EC - ASTM D5118, CLASS DOMESTIC CORRUGATED

FIBERBOARD BOX, GRADE 275, STYLE IS FOL (FULL OVERLAPPING STYLE FLAPS)

TO ENSURE ITEM DOES NOT PENETRATE THROUGH THE CONTAINER. METAL FASTNERS

ARE PROHIBITED FOR USAGE AS CONTAINER CLOSURE. SIZE: 4-3/8 X 4-3/8 X

40-3/4.

4(b). PACKAGED PART SHALL BE PLACED INSIDE A WATERVAPOR PROOF BARRIER

BAG TO MEET PRESERVATION METHOD 42 REQUIREMENT.

4(c). SUPPLEMENTAL UNIT CONTAINER NO - ASTM D5118, CLASS WEATHER

RESISTANT, DOUBLE-WALL CORRUGATED FIBERBOARD BOX, GRADE W5C, STYLE IS

FOL (FULL OVERLAPPING STYLE FLAPS). SIZE: 5 X 5 X 41-1/2.

NOTE: MIL-STD-129 IDENTIFICATION LABEL SHALL BE ON UNIT CONTAINER,

BARRIER BAG, AND SUPPLEMENTAL CONTAINER. 3 LABELS PER ITEM.

NOTE - LEVEL A PACKING: REQUIRES PPP-B-601 CLEATED PLYWOOD BOXES,

WEATHER-RESISTANT OR PPP-B-621, CLASS 2, NAILED WOOD BOXES.

REFERENCE NUMBER:IP025 OBJECT TEXT ID ST LANGUAGE E

NSN:014235120

PROPELLER SHAFT WITH UNIVERSAL JOINT, VEHICULAR.

(SHAFT ASSY, COUPLING FRONT)

REFERENCE NUMBER:RD005

REFERENCE NUMBER:ZL006

REFERENCE NUMBER:RQ036

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:RQ042

REFERENCE NUMBER:CS120

REFERENCE NUMBER:CS187

REFERENCE NUMBER:IP025

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RP001

ALL PARAGRAPHS UNDER 8.3 (DESIGN AND DEVELOPMENT OF PRODUCTS

AND SERVICES) DO NOT APPLY

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ016

REFERENCE NUMBER:RT001

REFERENCE NUMBER:ZD080

CRITICAL APPLICATION ITEM

AM GENERAL LLC 34623 P/N 12342620-1

DANA COMMERCIAL VEHICLE MANUFACTURING, 72447 P/N 915806-1618

IAW BASIC DRAWING NR 19207 12342620

REVISION NR B DTD 06/21/2012

PART PIECE NUMBER: 12342620-1

IAW REFERENCE DRAWING NR 19207 10899391

REVISION NR A DTD 02/17/1977

IAW REFERENCE DRAWING NR 19207 12369003

REVISION NR J DTD 06/30/2018

IAW REFERENCE QAP 19207 12342620

REVISION NR B DTD 09/05/2012

IAW REFERENCE DRAWING NR 19207 12342620-1

REVISION NR DTD 04/20/2026

IAW REFERENCE DRAWING NR 19207 12342620-1

REVISION NR A DTD 05/04/2026

IAW REFERENCE QAP 16236 SQAPCARCLTPHOS81361

IAW REFERENCE QAP 16236 CDRL-81361CARPH-17272

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PRESERVATION, PACKAGING, AND PACKING SHALL BE IN

ACCORDANCE WITH SPECIAL PACKAGING INSTRUCTION

(SPI) AK14235120, REVISED B, DATED 05-04-2026.

REFERENCE NUMBER:ZD079 OBJECT TEXT ID ST

13 - Open this side

If Product First Article Testing (FAT) is required and a Packaging FAT is included in the Special Packaging Instruction or Drawing, the

Packaging FAT requirement is invoked. If there is no Product FAT, no

Packaging FAT is required.

REFERENCE NUMBER:IP025 OBJECT TEXT ID ST LANGUAGE E

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS

DOCUMENT:

ITEM DESCRIPTION TEXT

REFERENCE NUMBER RD005

RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2

Certified Third-Party Assessment Organization (C3PAO)

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY

REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER CS187

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

REFERENCE NUMBER RQ032

RQ032: EXPORT CONTROL OF TECHNICAL DATA

This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations

(ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United

States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS

252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint

Certification Program (JCP) certification, have completed the

Introduction to Proper Handling of DOD Export-Controlled Technical Data

Training and the DLA Export-Controlled Technical Data Questionnaire

(both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:

https://www.dla.mil/Logistics-Operations/Enhanced-Validation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.

REFERENCE NUMBER RQ002

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE

PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

REFERENCE NUMBER CS120

NOTE: THE CITED DRAWING IS A SOURCE CONTROLLED

DRAWING AND AS OF THE DATE OF THIS SOLICITATION

ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE

BEEN APPROVED. EVEN THOUGH SOURCES AND APPROVED

PART NUMBERS ARE PROVIDED, THE ITEMS

FURNISHED MUST MEET THE REQUIREMENTS OF THE

CITED DRAWING. OFFERORS WHO ARE INTERESTED IN

QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE

ACQUISITION MUST CONTACT THE COGNIZANT DESIGN

ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED

DRAWING.

ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES

THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT

THIS TIME.

REFERENCE NUMBER CS147

"THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH

MUST CONFORM TO SOURCE CONTROL DRAWING. BY

SUBMITTING AN OFFER, THE OFFEROR AGREES TO

PROVIDE SOURCE CONTROLLED COMPONENTS FROM

SOURCES APPROVED ON THE APPLICABLE SOURCE

CONTROL DRAWING."

REFERENCE NUMBER ZD087

THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML

REQUIREMENTS. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE

QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE

QPL(S)/QML(S).

REFERENCE NUMBER ZD064

The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information.

REFERENCE NUMBER ZL006

This item contains a phosphate coating requirement

IAW MIL-STD-171, MIL-DTL-16232, and TT-C-490 Types I, II, and V. In lieu of the required submittal of a preproduction phosphate procedure the following is now required: The contractor responsible for the actual coating procedure must be certified by the Performance

Review Institute (PRI) to the NADCAP standard for the phosphate chemical processes. Verification of this certification is required and must be supplied upon request of the Contracting Officer.

REFERENCE NUMBER RD002

RD002, COVERED DEFENSE INFORMATION APPLIES

REFERENCE NUMBER RQ009

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

REFERENCE NUMBER RT001

RT001: MEASURING AND TEST EQUIPMENT

REFERENCE NUMBER RQ001

RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS

(MANUFACTURERS AND NON-MANUFACTURERS)

REFERENCE NUMBER RQ017

RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING

REFERENCE NUMBER RQ042

RQ042: Non-Tailored Higher-Level Quality Requirements (ISO 9001:2015) for Manufacturers and Non-Manufacturers

REFERENCE NUMBER CS060

THE ITEM DESCRIBED IN THIS SOLICITATION

IS DEFINED IN WHOLE OR IN PART BY ARMY

DRAWING(S). THESE DRAWING(S) MAY CONTAIN

A PAINT FINISHING REQUIREMENT. WHERE SUCH

REQUIREMENTS ARE SPECIFIED, USE DCSC DRAWING

16236 CS-2300-0001 IN LIEU OF FINISH REQUIRE-

MENTS OF THE ARMY DRAWING(S). THIS DRAWING

CONTAINS SPECIFICATIONS FOR CHEMICAL AGENT

RESISTANT COATINGS (CARC), AND ADDITIONAL

INFORMATION RELATING TO HIGH TEMPERATURE

COATINGS.

REFERENCE NUMBER CQAID

WHEN FIRST ARTICLE IS REQUIRED IN THE

CONTRACT, THE CONTRACTOR SHALL MARK THE OUTER

SHIPPING CONTAINER IN 2 INCH BOLD, RED LETTERS

"FIRST ARTICLE". THE CONTRACTOR SHALL ALSO

PROVIDE THE TESTING FACILITY WRITTEN

NOTIFICATION OF WHEN THE FIRST ARTICLES

EXHIBITS WILL BE SHIPPED TWO WEEKS BEFORE THE

SHIP DATE.

REFERENCE NUMBER ZD080

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS

OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

REFERENCE NUMBER IS001

MIL-STD-130N, 16 Nov 2012

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

REFERENCE NUMBER RQ018

RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION

(AUG 2016)

This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of

Supply Chain Traceability Documentation (AUG 2016)#. The full text of

C03 can be found in the DLAD Procurement Notes on the Web at:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx.

(End of TQ Requirement)

REFERENCE NUMBER ZD025

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

REFERENCE NUMBER IP025

IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS

REFERENCE NUMBER RQ036

RQ036- Phosphate Coating Supplier Certification Requirements

REFERENCE NUMBER RQ016

RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS

LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A

SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR

QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN

PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED

MANUFACTURERS LIST (QML)" APPLY.

REFERENCE NUMBER ZD079

ZZ -ADDITIONAL SPECIAL MARKING:

Protected Cargo (Controlled, Sensitive, Classified, Pilferable items).

Special Marking Code 40 applies -- "Markings shall be omitted for sensitive, controlled or pilferable items per MIL-STD-129."

The item description (nomenclature) shall be omitted from all shipping containers of protected cargo. See MIL-STD-129, paragraph 5.4.1.6

(Protected Cargo) for more information.