Attachment 1.pdf

REQ DOC NO. -

CONTINUATION SHEET

RCP 23RX19752 ATTACHMENT 1

PAGE _1__ OF _5__

NAME OF OFFER OR/CONTRACTOR

NUT, HEX, REGULAR, SELF-LOCKING 200 EA

NSN: 1H 5310-01-213-5387 X2, Item 7024AG

C. DESCRIPTION/SPECIFICATIONS

C.1 THIS IS LEVEL I MATERIAL

C.2 NUT, HEX, REGULAR, NICKEL COPPER, SELF-LOCKING

0.875”-09UNC-3B.

C.3 MANUFACTURE NUTS PER 688-1864 REV K WITH APPENDIX 2, AND

NASM 25027 REV. 1 AS INVOKED.

(A) NUT, SELF-LOCKING, 250F, 450F, AND 800F: NASM 25027 REV. 1.

(B) NASM 17828 DASH NUMBER 14C. SCREW THREADS SHALL BE

INSPECTED PER ASME B1.3 SYSTEM 22. SELF-LOCKING MATERIAL

SHALL BE IN ACCORDANCE WITH ASTM-D-4066 OR ASTM-D-6779,

GROUP 1, CLASS 1, GRADE 1 OR 4, OR ASTM-D-4066, GROUP 1,

CLASS 2, GRADE 1 OR 4.

(C) PACKAGING/PACKING PER SECTION D OF THIS PART.

(D) APPLICBLE SPECIFICATION REVISIONS TO BE USED ARE:

SPECIFICATION 688-1864 REV K

NASM 25027 REV 1

NASM 17828 REV 1

MIL-I-45208A, AM(1)

MIL-STD-129R W/CHANGE 2

MIL-STD-792F

MIL-STD-2132F

QQ-N-281D AM(2) & IC(1)

SAE J 122 JUL 75 REAFFIRMED MAY 1998

ITEM # 0001 SUPPLIES/SERVICES QTY U/I

FOR SPECIFICATIONS NOT LISTED ABOVE, REVISIONS SHALL BE

THOSE LISTED IN THE ACQUISITION STREAMLINING AND

STANDARDIZATION INFORMATION SYSTEM (ASSIST) AT THE TIME

OF CONTRACT AWARD. AS OF THE ISSUE DATE OF THIS, ASSIST

INFORMATION IS AVAILABLE AT THE FOLLOWING WEBSITE:

https://quicksearch.dla.mil

C.3.1 MATERIAL TO BE NICU PER CHEMICAL AND MECHANICAL

PROPERTIES OF MATERIAL NO. 8 (QQ-N-281 CLASS A OR B OR MIL-

N-24106 ANY CONDITION) OF 688-1864 REV K.

C.4 SELF-LOCKING ELEMENT: LOCKING ELEMENT TO BE PER NASM

25027 FOR SERVICE AT 250 DEGREES F AND LOWER THE FOLLOWING

CLARIFICATIONS ARE PROVIDED FOR THE NASM 25027 TESTING

REQUIREMENTS:

(A) WRENCH TORQUE TESTING IS NOT REQUIRED.

(B) BEARING SURFACE SQUARENESS TESTING IS REQUIRED USING

THE SAMPLING REQUIREMENTS OF NASM 25027, PARA 4.4.1.2

(C) PERMANENT SET TESTING IS REQUIRED USING THE SAMPLING

REQUIREMENTS OF NASM 25027, PARA 4.5.3.3.4 (3 SAMPLES)

C.5 CLEANLINESS REQUIREMENTS: PARTS SHALL BE CLEANED BY ANY

PROCESS OR COMBINATION OF PROCESSES WHICH WILL

ACCOMPLISH THOROUGH CLEANING WITHOUT DAMAGE TO THE

PARTS. SURFACES SHALL BE EXAMINED VISUALLY TO DETERMINE

FREEDOM FROM DIRT, CORROSION, OIL, GREASE OR FOREIGN

RESIDUE.

C.6 THE CONTRACTOR MUST PROVIDE THE PROCURING ACTIVITY WITH

ALL THE SUBMITTALS LISTED BELOW. SUBMITTALS WHICH ARE

REQUIRED BY A SPECIFICATION, BUT WHICH ARE NOT LISTED, NEED

NOT BE SUBMITTED. ONLY THOSE SUBMITTALS LISTED BELOW ARE

REQUIRED.

NO SUBMITTALS REQUIRED

C.7 DATA REQUIREMENTS PER EXHIBIT A (DD-1423) & ATTCHMENT #1.

C.7.1 MATERIAL CERTIFICATIONS; EXHIBIT A SEQUENCE A001.

C.7.1.(A) THE CONTRACTOR SHALL PROVIDE THE LISTED

PROCEDURE(S)/CERTIFICATION REPORT(S) TO THE

PROCURING ACTIVITY. THE CONTRACTOR SHALL

SPECIFY THE FOLLOWING ON PROCEDURE(S)/REPORT(S)

REQUIRING SUBMITTAL, AS APPLICABLE, IN ORDER

THAT THE PROCEDURE/REPORT CAN BE READILY

REVIEWED AGAINST THE APPROPRIATE ACCEPTANCE

CRITERIA:

(1) SPECIFICATIONS AND REVISIONS, INCLUDING

AMENDMENTS, NOTICES, ETC.

(2) APPLICABLE PARAGRAPH OF THE SPECIFICATION

(3) THE NAME OF THE SUBMITTAL

(4) THE MATERIAL CONDITIONS (I.E., MATERIAL

GRADE, CLASS, TYPE, SIZE, COMPOSITION, ETC.)

IF A PARTICULAR CONDITION IS NOT SPECIFIED

AND THE SPECIFICATION PROVIDES FOR

ALTERNATIVE CONDITIONS, THEN THE

CONTRACTOR MAY, IN MANUFACTURING THE

ITEM, SELECT A CONDITION WITHIN THE SCOPE

OF THE SPECIFICATION USING TECHNICAL

JUDGMENT AND ANNOTATE THE REPORT

ACCORDINGLY.

C.7.2 NOT APPLICABLE

C.8 MATERIAL MARKING

C.8.1 EACH PIECE OF MATERIAL SHALL BE PERMANENTLY MARKED

AT LEAST ONCE WITH THE INFORMATION OF (A), (B), (C), AND

(D) BELOW USING THE PERMANENT MARKING METHODS OF

MIL-STD-792 OR THE PERMANENT MARKING METHOD

SPECIFIED IN THE MATERIAL SPECIFICATION.

(A) "ANICU’ AND ONE OF THE FOLLOWING MATERIAL

DESIGNATORS AS APPLICABLE:

MATERIAL DESIGNATORS FOR QQ‐N‐281 CLASSES A AND B

CONDITION (CLASS) MATERIAL DESIGNATOR

COLD DRAWN (B), COLD DRAWN AND STRESS RELIEVED (A OR B) NCH

HOT FINISHED (A), HOT FINISHED STRESS RELEIEVED (A) NCG

HOT FINISHED (B), HOT FINISHED STRESS RELEIEVED (B) NCF

MATERIAL DESIGNATORS FOR MIL‐N‐24106 BY CONDITION

CONDITION MATERIAL DESIGNATOR

A, AG, and B NCF

C NCH

H NCG

(B) VENDOR TRACEABILITY NUMBER TRACEABLE TO ALL

MANUFACTURE TEST AND INSPECTION INFORMATION AND TO

A UNIQUE SET OF PHYSICAL, MECHANICAL, AND CHEMICAL

TEST RESULTS WHICH REPRESENT THE MATERIAL USED TO

MAKE THE PIECE.

(C) THE MANUFACTURER'S NAME, TRADEMARK, OR SYMBOL.

(D) INFORMATION REQUIRED BY THE SPECIFICATION IN

ADDITION TO THAT REQUIRED BY (A), (B), AND (C) ABOVE

SHALL BE MARKED EITHER PER THE SPECIFICATION OR AT

LEAST ONCE PER PERMANENT MARKING METHODS OF MIL-

STD-792. MATERIAL DESIGNATOR LISTED IN THE

SPECIFICATION NEED NOT BE MARKED ON THE MATERIAL IF

IT IS DIFFERENT FROM THAT SPECIFIED BY (A) ABOVE.

C.8.2 IF ANY MARKING SPECIFIED ABOVE CANNOT BE APPLIED DUE

TO SPACE LIMITATION, A WAIVER REQUEST SHALL BE

SUBMITTED TO THE CONTRACTING OFFICER.

C.8.3 WHEN FEASIBLE, CONSOLIDATE THE PLACEMENT OF THE

PERMANENT MARKING TO ACCOMMODATE THE MARKING OF

A 9-DIGIT FINAL ACCEPTANCE MARKING AT PORTSMOUTH

NAVAL SHIPYARD. DO NOT COMPROMISE LEGIBILITY OF THE

PERMANENT MARKING TO CONSOLIDATE THE SPACING.

D. PRESERVATION/PACKAGING/PACKING

D.1 PRESERVATION, PACKAGING, AND PACKING SHALL BE IN

ACCORDANCE WITH ASTM D3951-15, STANDARD PRACTICE FOR

COMMERCIAL PACKAGING, EXCEPT THAT EACH EXTERNALLY

THREADED FASTENER SHALL BE FURNISHED WITH A THREAD

PROTECTOR AND EACH ITEM SHALL BE INDIVIDUALLY PACKAGED

IN A COLORED (EXCEPT YELLOW) TRANSPARENT ZIP-LOCK TYPE

PACKAGE WITH A MINIMUM SIZE OF 4” X 7”. MARKING AND

LABELING SHALL BE IN ACCORDANCE WITH MIL-STD-129. BAR

CODE MARKING FOR HAND SCANNING IS REQUIRED.

E. INSPECTION AND ACCEPTANCE

E.1 GOVERNMENT INSPECTION IS REQUIRED DURING MANUFACTURE

AND PRIOR TO SHIPMENT FROM THIS FACILITY. UPON RECEIPT OF

THIS ORDER, PROMPTLY NOTIFY THE REPRESENTATIVE OF THE

GOVERNMENT OFFICE WHO NORMALLY SERVES YOUR FACILITY SO

THAT APPROPRIATE PLANNING FOR GOVERNMENT INSPECTION CAN

BE ACCOMPLISHED. IN THE EVENT A REPRESENTATIVE OF THE

GOVERNMENT OFFICE CANNOT BE LOCATED, THE CONTRACT

SPECIALIST SHOULD BE NOTIFIED PROMPTLY. PROVIDE THE

LOCATION WHERE PROCUREMENT QUALITY ASSURANCE (PQA) OF

THE SUPPLIES WILL BE MADE ALONG WITH THE ORGANIZATION

THAT WILL BE PERFORMING PQA.

E.2 ALL NON-CONFORMANCES TO CONTRACT REQUIREMENTS

AFFECTING PRODUCT AND/OR DOCUMENTATION SHALL REQUIRE

PROCURING ACTIVITY WAIVER APPROVAL TO ACCEPT.

E.3 APPROVED SAMPLING PLANS (E.G. MIL-STD-105, ANSI/ASQC Z1.4)

ARE ALLOWED AS DELINEATED IN THE APPLICABLE

MANUFACTURING SPECIFICATION EXCEPT THAT A LOT IS

ACCEPTABLE BASED ON ZERO DEFECTS. WHEN A REJECT IS FOUND,

THE ENTIRE LOT SHALL BE INSPECTED FOR THAT ATTRIBUTE AND

ANY DEFECTIVE ITEMS SHALL BE REMOVED FROM THE LOT IN

ORDER FOR THE LOT TO BE ACCEPTABLE