Attachment 1. LOM Kitchen Specification.pdf

Specification 1

Quantity: 6.00 pieces D-VK furniture Kitchen unit from left to right consisting of:

1.0 D-VK-furniture

Work cabinet with doors and basin consisting of:

Worktop made of 1.5 mm CNS (1.4301) with CNS profiles underlaid.

Backsplash 50 mm: left and rear 50 mm bevelled edge: front and right A basin 400x400x250 mm welded flush into the worktop.

In the center behind the basin a hole ø= mm for a customer-supplied mixer tap.

Substructure:

On the left, a free space of approx. 605 mm for the installation of an on-site under-table dishwasher. Under the basin approx. 610 mm closed on two sides with welded-in base bottom.

base bottom. Base bottom edged 65 mm at the back. Cabinet substructure at rear approx. 100 mm indented. Front side closed with hinged doors. On the right side a cabinet base approx. 426 mm closed on three sides with welded-in base shelf and one height-adjustable intermediate shelf.

Front side top with one box drawer 100 mm on CNS full extension slides with self-closing mechanism and at the bottom with a hinged door DIN left closed. Rear right with a wall connection panel.

Installed on height-adjustable die-cast aluminum feet with 170 mm floor clearance.

ground clearance.

Dim.: approx. 1650x700x920 mm

Accessories:

1 pc. standpipe valve 1 pc. Drain set 1 pc. Wall support angle 40/40x680 mm

Specification 2

Single lever mixer tap with swivel faucet, single hole installation

- for single hole mounting

- recommended hole drilling: ø 50 mm

- threaded connection: ø 1/2"

- water flow rate: 26 l/min.

Specification 3

D-VK- Furniture Work cabinet with door and drawer consisting of:

Worktop made of 1.5 mm CNS (1.4301) lined with CNS profiles.

Backsplash 50 mm: rear 50 mm bevel: left and front Upstand and bevel 50 mm: right side Cabinet base closed on three sides with welded-in base shelf and one height-adjustable intermediate shelf.

Front side top with one box drawer 100 mm on CNS full extension slides with self-closing mechanism and at the bottom with a hinged door DIN left closed.

Set-up on height-adjustable die-cast aluminum foot studs with 170 mm ground clearance.

Dim.: approx. 600x700x920 mm

Specification 4

D-VK furniture Wall cabinet with doors completely made of CNS (1.4301) Cabinet compartment with lined base shelf and one height adjustable intermediate shelf with reinforcement.

Front side closed with sliding doors.

Dim.: approx. 1650x400x800 mm

Specification 5

Quantity: 6.00 pieces

D-VK ventilation Wall hood beveled shape with blower execution completely made of CNS (1.4301) Hood subdivided into collection and extraction chamber and grease collecting channel with drain cock at the back.

With built-in blower (1000 m³h free blowing) blowing out to the top with regulator, lighting under ESG glass cover incl. flame protection filter tested according to DIN 18869-5 type A filter size: 500x400x25 mm dim.: approx. 760x800x120/450 mm

Specification 6

D-VK furniture Wall cabinet with doors completely made of CNS (1.4301) Cabinet compartment with lined base shelf and one height adjustable intermediate shelf with reinforcement.

Front side closed with one hinged door DIN right.

Dim.: approx. 600x400x800 mm

Specification 7

Quantity: 6.00 pieces

Spiral duct Diameter 100 mm

WFR 100

Specification 8 Quantity: 18.00 pieces

Bend 90° Diameter 100 Art. BOG 9

Specification 9 Quantity: 6.00 pieces

Outlet nozzle diameter 100 mm Art. ASS 4510