Attachment 1 Capabilities Questionnaire.docx

SOURCES SOUGHT – INDUSTRIAL IDIQ N6247022R9006

ATTACHMENT 1: CAPABILITIES QUESTIONNAIRE

Use this form to provide general information. The space at the end of the form may be used to clarify any requested information. Please respond to all questions as completely as possible.

SECTION 1. GENERAL

Unique Entity ID: ____________________ CAGE Code: ____________________ A. Business Name: (Insert Business Name) B. Business Address: (Insert Business Address) C. Is your firm registered under the NAICS code 541330? (Yes or No).

a. If not, what NAICS code do you propose for this requirement and why? __________________

b. If so, indicate the business size in relation to the NAICS code 541330 and socioeconomic programs for which the firm qualifies. ___________________________ D. Proposed Product Service Code (PSC) is C211 -- ARCHITECT AND ENGINEERING- GENERAL: LANDSCAPING, INTERIOR LAYOUT, AND DESIGNING. Does your Firm propose another PSC? If so, please explain ________________________ E. Does your firm employ more than 15 full-time personnel? (Yes or No)

a. Capability (key personnel) to perform such work. Please list the number of architects and engineers on your staff:

Architect

Interior Designer

Civil Engineer

Landscape Architect

Structural Engineer

Electrical Engineer

Mechanical Engineer

Geotechnical Engineer

Fire Protection Engineer

Cost Engineer

F. Responsible Point of Contact:

Name: (Insert Name) Telephone: (Insert Telephone Number) Email: (Insert Email Address)

SECTION 2. TYPE OF BUSINESS: (check all that apply) ________Small Business (SB) ________Service Disabled Veteran Owned SB (SDVOSB) ________ SBA certified Historically Underutilized Business Zone (HUBZone) SB ________ SBA certified Section 8(a) SB ________ SBA certified Women-Owned Small Business (WOSB) ________ Economically Disadvantaged Woman-Owned Small Business (EDWOSB) ________Other Than Small Business (Insert Type) ________________________ NOTE: Recent changes to the WOSB program. As of October 15, 2020, WOSB/EDWOSBs must be registered at beta.certify.sba.gov. WOSBs/EDWOSBs may no longer self-certify to establish qualification for WOSB/EDWOSB set-aside contracts. Contractors must be registered in SAM at time of bid/proposal due date. For more information on the definitions or requirements for these small business programs, refer to http://www.sba.gov.

EXPERIENCE:

1. Number of years/months executing AE projects performing services similar to those anticipated under this contract: ________years ________ months

2. Number of years/months executing US Government AE projects performing services similar to those anticipated under this contract: ________years ________months

3. What is your Firm’s highest dollar valued AE contract within the last five years?

4. The $95M Industrial AE Services IDIQ may require work as follows. Select all that apply that the Firm has performed within the past five years:

a. Airfield Paving (Yes or No)

b. Deployable Airbase Systems-Facilities, Equipment, and Vehicle (DABS-FEV) (Yes or No)

c. Hangar (Yes or No)

d. Ground Vehicle Fuel Facility (Yes or No)

e. Base Aircraft Operations Facility (Yes or No)

f. Explosive Ordnance Disposal (EOD) (Yes or No)

5. Does your Firm have the ability to simultaneously manage multiple projects totaling $19M or more per year? (Yes or No)

6. How many $750K task orders can the firm successfully perform and manage at one time:

a. One task order

b. Two task orders

c. Three task orders

d. Four task orders

e. Five task orders

f. More than five task orders

7. Has the Firm designed multiple concurrent OCONUS MILCON projects totaling at least $10M in AE contract value? (Yes or No)

a. If yes, indicate when and locations of projects.

8. The firm has performed these types of services within the past 5 years:

a. Military (engineering and design for renovation and repair of facilities and associated infrastructure on a DoD installation) (Yes or No)

b. Military (engineering and design for new facilities on a DoD installation) (Yes or No)

c. Federal (engineering and design for non-DoD) (Yes or No)

SECTION 3. CONTRACTOR ARRANGEMENT

Our firm will most likely be proposing on this IDIQ as a:

____Joint Venture with (Insert business name, business size, and cage code).

Refer to FAR subpart 9.6 for Government policy on teaming arrangements, as well as 8(a)Program regulations described in 13 CFR 124.513, HUBZone Program regulations described in 13 CFR 126.616, and Service-Disabled Veteran-Owned Program regulations described in FAR 19.1403(c) and 13 CFR 125.15(b).)

____Sole Contractor, self-performing 100% of the work ____Prime Contractor (Small Business), self-performing at least 50% of the work ____Prime Contractor (Small Business) performing at least 50% of the work with the following team member subcontractor(s) (Insert business name, business size, cage code, and work which will be subcontracted) (IAW FAR 52.219-14(e)(1), dated Sept 2021) ____Subcontractor, performing less than 50% of the work for (Insert business name, business size, cage code, and work which will be done) ____ Prime Contractor (Large Business) subcontracting more than 50% of the work (Insert business name, business size, cage code, and work which will be subcontracted) ____Other – explain_________________________