Attachment 03_ End Cap_Certified Material Test Report.pdf
PDF 99 KB Posted
- Attached to
- MJU76 B End Caps
- Solicitation number
- W52P1J22Q76GF
View the file
Other files
| File | Type | Posted |
|---|---|---|
| B01 - Attachment 09_ Pricing Sheet_Unlocked.xlsx | XLSX spreadsheet | |
| B01 - Attachment 08_ Pricing Sheet_Unlocked.xlsx | XLSX spreadsheet | |
| Attachment 05_ Lot Number Instructions.docx | DOCX document | |
| B01 Attachment 06_ Pricing Sheet.xlsx | XLSX spreadsheet | |
| Attachment 07_52.212-3_Reps and Certs.docx | DOCX document | |
| Attachment 04_Technical Data Package Information.pdf | ||
| Attachment 02_Material Spec_ASTM D3935_ End Cap.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CERTIFIED MATERIAL TEST REPORT / CERTIFICATE OF ANALYSIS
For those material(s) identified below, a Certificate of Analysis (C of A) test report shall be provided to the government at time of delivery to CAAA (Crane Army Ammunition Activity). The test results contained on the Certificate of Analysis report(s) shall be adequate to determine compliance with all applicable requirements of the material specification(s) listed below. Availability of the Certificate of Analysis may be in addition to other Purchase requirements and does not reduce or prejudice the Government’s right to inspect supplies under other provisions of this contract.
The test report(s) shall contain the following:
a. Name and address of Manufacturer and Supplier when *applicable.
(*If not manufactured by the Supplier.)
b. Purchase order number.
c. Identification of material by specification, revision, amendment and dates, together with type, grade, size etc. number.
d. Quantity of material.
e. Material testing results shall address drawing specifications.
Component: End Cap.
Drawing: 3976AS118 Rev. C
Note 1. Material Polycarbonate, ASTM D3935, PC0110G10A12230 Color Black PC0110 = General Purpose Polycarbonate
G10 = 10% Glass filled A = Table A Properties from ASTM D3935 apply 1 = 40 MPa Tensile Strength min
2 = 3000 MPa Flexural Modulus min 2 = 80 Jm Izod Impact Strength min 3 = 125° Deflection Temperature min
0 = To be determined, Unspecified.
*Use ONLY 100% Virgin Material.
*NO Reground Material Allowed.
ASTM D3935 Table A
Note: Component (End Cap) shall be identified with a traceable lot number at time of delivery.
Note: The Raw Material (Polycarbonate) shall be tested per ASTM D3935 as stated above. Results of this testing (i.e. Certified Material Test Report / Certificate of Analysis) shall be provided to CAAA at time of delivery.
f. Quantity tested, sample size, and specimen type as applicable.
g. Date, signature, and title of the authorized representative of the contractor that is attesting to the accuracy of test report content.
Component: End Cap.
Requirements for: MJU-76/B Program.
Page 2 of 2.
File details come from the government source that posted it. Updated .