Attachment 01 - Statement of Work .pdf
PDF 119 KB Posted
- Attached to
- Control Tower Elevator Modernization
- Solicitation number
- FA480324R0005
About this file
This document includes a statement of work and federal contract opportunity notice for an elevator modernization project. The statement of work details the scope of work to modernize an existing passenger elevator at Shaw Air Force Base, including replacing the existing control system, installing a new non-proprietary microprocessor controller, upgrading components like the drive unit, hoist ropes, and roller guides. The federal contract opportunity is a pre-solicitation notice for solicitation number FA480324R0005 to perform the elevator modernization work. The project value is estimated between $250,000 to $500,000, proposals are due on February 8, 2024, and the performance period will be 98 calendar days. The acquisition is set aside 100% for small businesses and will be awarded based on best value. The agency is the Department of the Air Force Air Combat Command.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REPAIR/RENNOVATE
STATEMENT OF WORK
B1990 ELEVATOR MODERNIZATION
12/05/2023 Project: VLSB 24-XXXX
SCOPE OF WORK:
This Statement of Work (SOW) is for the modernization of the Control Tower Elevator at building B1990 at Shaw Air Force Base (AFB).
The existing elevator was installed in 1997. It is a Thyssen passenger elevator rated a 1500 lbs. and has eight floor stops. This elevator is out of service and requires modernization.
Replace existing control system: furnish & install a new NON-PROPRIETARY microprocessor controller. Includes but not limited to the following features:
• New Drive Unit (KEB type or equivalent) o New Insolation Transformer
• New Car Top Tape Reader - ensures elevator stops level with each landing.
o Stationary perforated steel tape for landing accuracy o Include New Terminal Limit Switches.
• New Car Top Inspection Station with all code compliant features.
• Geared hoist machines o Retain Gear Box o Provide New VVVF Motor & Coupling o New Hoist Ropes & shackles o New Rope Gripper
Furnish and install new overspeed governor & governor rope.
Furnish and install new car and counterweight roller guides (ELSCO type or equivalent)
Furnish & install new copper wiring, wire duct, EMT (Electric Metallic Tubing) and fittings as required for new equipment.
• Includes Traveling Cable, Home Run & Hoistway Wiring.
Furnish & install a new Car Operating Panel inside the elevator cab, total one (1) per car, including all current code requirements and Emergency Telephone. Finish will be #4 brushed stainless steel. Features include the following:
• Illuminated heavy-duty pushbuttons
• Emergency light
• Independent service, stop, fan/light, access enable & Firemen’s Service key switches
• Digital position indicator
• New Code compliant Emergency Communication Device
• No Smoking, Capacity signage
• Alarm Bell pushbutton, connected to a new Alarm Bell
Furnish & install new surface-mounted hall pushbutton stations in #4 brushed stainless steel.
• Including new hoistway access switches
• Firemen’s service Phase I & Phase II key switch
• Emergency Communication monitoring device
• All required signage shall be engraved.
Furnish & Install New Door Operator (MOVFR II type or equivalent)
• New car door hanger, track & clutch assembly
• New door detection device (FS Vision Plus type or equivalent)
• New Hoistway Interlock assemblies
• New two-speed ventilation fan
All work will meet current code requirements: ANSI A17.1.
END OF BASE BID PROPOSAL
File details come from the government source that posted it. Updated .