Attachment 001 - Statement of Work.docx

STATEMENT OF WORK

FOR

WORKAREA BUILDS

AT

JOINT BASE MCGUIRE-DIX-LAKEHURST, LAKEHURST, NEW JERSEY 08733

15 May 2025 “NMCI INSIDE PLANT (ISP) CABLE INSTALLATION STANDARDS” and “UFC 3-580-01 Information and Communications Technology Infrastructure Planning and Design, 21 November 2024” shall be referred to as “Cabling Specifications” and are considered part of this Statement of Work (SOW). “NAVAIR AutoCAD Layer List” is also considered part of this Statement of Work (SOW).

SCOPE

The intent of this document is to provide the offeror an understanding of the scope of the work required to provide and install designated brand name furniture, or equivalent, in accordance with the SOW Diagrams into Building 5 (Second Floor Location WITHOUT elevator access - must hand carry), Building 150 (Second Floor Location with elevator access), Hangar 1 (relocation destination only-elevator access), and Building 678 (Ground Floor Location) at Naval Air Warfare Center Aircraft Division (NAWCAD) Lakehurst, on Joint Base McGuire-Dix-Lakehurst, NJ 08733. Procure, assemble and deliver furniture to include the following specified items:

One (1) Private Office Suite (Building 5);

Two (2) Freestanding Lab Furniture Workareas (Building 5);

Three (3) Style A Standard Systems Furniture Workareas (Building 5);

Two (2) Style A High Grade Expanded Systems Furniture Workareas (Building 5);

Two (2) HG Freestanding Furniture Workareas (Building 5);

Two (2) Tall Storage Cabinet (Building 5);

One (1) Low Storage Cabinet with worksurface (Building 5);

Three (3) Printer Areas (Building 5);

One (1) Collaborative Whiteboard Cart (Building 5);

One (1) Collaboration Media Cart Set (Building 5);

One (1) Executive Wood Office Desk – Building 150, Second Floor 231;

One (1) Executive Wood Office Suite – Building 150, Second Floor 207;

Disassemble, relocate and assemble four (4) existing benching units of various sizes from Building 678 to Hangar 1, (locations to be determined prior to delivery, detach existing power and electric from current location and secure, no power or data wiring will be required at destination);

Four (4) Style B Standard Systems Furniture Workareas (Building 678);

Four (4) Style B High Grade Expanded Systems Furniture Workareas (Building 678);

One (1) End Table (Building 678, location will be determined upon delivery);

One (1) 5-Drawer Lateral File;

Four (4) Tall Storage cabinets (Building 678, location will be determined upon delivery);

Four (4) Low Storage Cabinets with worksurfaces, (Building 678, location will be determined upon delivery);

Five (5) Front Step-On Trash Cans (locations will be determined upon delivery);

One (1) installed 48-port Patch Panel with lockable Wall Rack enclosure.

The Contractor shall provide all personnel, equipment, tools, labor, materials, supervision, transportation and any and all other items necessary to perform the following work as describe herein.

APPLICABLE DOCUMENTS

All work shall be accomplished in accordance with all Federal, state, and local laws and regulations, applicable building codes and standards including but not limited to the following:

Occupational, Safety and Health Admin. (OSHA);

AFOSH (Air Force Occupational Safety and Health) Guidelines;

Environmental Protection Agency Regulations (EPA);

National Electrical Code (NCE);

National Fire Protection Assoc.(NFPA);

Under Writers Lab. (UL);

United Facilities Guide Specifications (UFGS) Division 26 Electrical, Section 26;

National Fire Code Standard 241 Safeguarding Construction, Alteration, and Demolition Operations 2002 edition;

Industry standards, e.g. ANSI-BIFMA and BSR/HFES 100, and conform to the Architectural Barriers Act Accessibility Guidelines;

Base Regulations. The Contractor shall conform to all Base regulations and directives that pertain to security, safety, traffic, fire and personnel clearances insofar as they apply to the Contractor’s activities or as directed by the Contracting Officer.

REQUIREMENTS

Proposal Requirements. All requirements stated in the statement of work (SOW) are minimums. All required aspects of a Contractor’s proposal shall be presented in one document, one email with attachments or one hard copy presentation. Pertinent contractor Information to include, at minimum the following:

Confirmation that office furniture pricing is discounted in accordance with either a U.S. Service Blanket Purchase Agreement or GSA Contract and provide the applicable contract number(s);

For past performance evaluation, provide three (3) contract numbers and associated point of contact information to include name, title and phone number for projects of similar nature within the past five years;

Manufacturer’s verification of installer’s qualifications and warranty coverage;

Proposed Furniture Plans. The floor plans included in the Statement of Work package are provided to communicate space relationships and preliminary requirements only. The Contractor shall develop and submit proposed furniture plans indicating power, task lighting, and IT/Communications in .pdf format for review. Indicate all permanent walls, windows, entrances, exits, utility items (i.e. thermostats), electrical, aisle widths and any adjacent systems furniture/office furnishings scheduled to remain. Any modifications required due to items not shown on the drawing will be completed by the Contractor without additional charge;

Furnishings List. Proposals shall provide an itemized list and dimensions of all systems furniture and office furnishings being provided. If products differ from specified items, those differences should be identified and sufficient product information provided for evaluation;

Cost Breakdown. Proposals shall provide an itemized list of associated costs;

Milestone Schedule. All proposals must have a detailed Milestone Schedule that clearly delineates the completion of the SOW requirements. From notice of contract award, provide a detailed list identifying what procurement related items will be accomplished each week through professional cleaning/project completion;

Listing of all intended subcontractors showing legal name, address and respective New Jersey Division of Consumer Affairs License Number, if applicable.

Final Walk Through. A Final walk through shall occur upon completion of work effort. The Government shall develop a punch-list of items and efforts identified by the government representative(s). All punch-list items within the scope of this contract shall be completed prior to final payment.

Conduct of Work Scheduled Effort. The Contractor’s efforts shall be performed during the normal workday (7:30 am to 4:00 pm Monday through Thursday, Fridays by special appointment). All efforts shall be made to minimize noise, clutter and/or loss of power to remainder of occupied building. This project has a duration of 120 days from award.

It is expected that the offeror will do a thorough walk-through with the appropriate government representative(s) prior to placing the order to finalize the level of effort required, verify existing dimensions and conditions, as well as any and all changes or modifications. The Contractor shall verify existing floor plans for thermostats, light switches, electrical outlets, NMCI jacks and structural columns. The project shall be completely turn-key including all systems furniture electrical and data wiring connections. When considering the design, layouts shall be planned to limit open circulation within a workarea’s boundaries. Aisles between workstations are required to be 36 inches wide minimum with 48 inches desired. On all plans include workstation sizes and walkway dimensions.

Layout. For all documents associated with this project, distribution is authorized to U.S. government agencies and their contractors only. All other requests for these documents shall be referred to NAWCAD Lakehurst Site Operations Facilities. The Government makes no representation regarding the accuracy or completeness of electronic CAD files and the Contractor is responsible for verifying all existing conditions.

The Contractor shall provide and install furniture as specified herein to include any data, voice and electrical wiring not existing for the approved design plan. The specific work shall include, but not be limited to, the following:

All storage areas located within an individual workarea shall be lockable, keyed alike with an individual key provided for each lock;

All products provided by this contract shall be new, unless specifically identified.

No later than one day after installation is complete, the Contractor will provide professional interior cleaning where indicated on SOW diagram. Cleaning shall include removal of all debris, fingerprints and excess packing materials, vacuuming under all worksurfaces and adjacent area, wipe down of all interior, exterior, chair and adjacent surfaces, removal of packaging and protective tape, and light spot cleaning of any stained fabric surfaces. Any and all debris / trash generated by this project shall be removed and properly disposed of off base by the contractor, All Federal, State and Local laws and regulations regarding hauling and disposal shall apply.

Personnel. The Contractor shall use personnel in performance of this project who can obtain access to the base by having proper identification and clearances. Foreign nationals will not be granted access to the base.

The vendor shall have a supervisory representative on site while work is being accomplished. Provide dust covers or protective enclosures to ensure safe operating conditions. The existing building and the contents shall be kept secure at all times. Any adjacent areas damaged by the contractor during installation shall be properly repaired by the contractor at no expense to the Government.

Base Sponsorship. The Contractor shall adhere to the Joint Base McGuire-Dix-Lakehurst Access Control Procedures. No later than one month prior to installation, all contractor and subcontractor personnel must be pre-identified to the 87th Security Forces Squadron and included on the appropriate Contractor Entry Authorization List. Any personnel not pre-identified will not be allowed on the base. Pre-Identification does not constitute base access clearance. Individual workers are still required to complete a Request for Criminal History Record Form available at the Visitor's Center upon arrival and get a favorable result prior to receiving a visitor pass from either the Main Gate/Visitor Center or the Commercial Gate/Security Forces Office after showing a valid REAL ID Driver's License (if Driver’s License does not have a photo a separate identification with a photo will be required) or other federal form of ID (i.e. U.S. Passport, U.S. Passport Card, DHS Trusted Travel Card, U.S. Military ID, or Permanent Resident Card) and valid vehicle registration/proof of insurance for every vehicle entering the base. Individuals not born in the United States are subject to additional requirements and shall present original proof of immigration. Individuals with outstanding warrants for their arrest may be detained and turned over to the local authorities for further prosecution. The following criminal history findings will automatically disqualify any person requesting access or already having access to the installation from gaining or retaining access to the installation:

Any outstanding warrants or personnel who are in the country in violation of immigration law;

If US Citizenship, immigration status, or Social Security Account Number cannot be verified;

Debarred from entry or access to any military installation or facility;

Wanted by federal or civil law enforcement authorities, regardless of the offense or violation;

Any felony conviction within the past 10 years;

Any conviction of firearms or explosives violation within the last ten years;

Any listing as a sexual offender in a state database;

Incarcerated for 12 months or longer within the past ten years, regardless of the offense or violation. This can be a single incarceration or several combined which total 12 months;

Any conviction of espionage, sabotage, treason, terrorism or murder;

Any conviction of DUI manslaughter or involuntary manslaughter in the past 10 years;

Any conviction of sexual assault, armed assault, robbery, rape, or child molestation;

Any conviction of drug possession, drug manufacture or drug distribution within the past 5 years, reviewable on a case-by-case basis.

Any person who has been arrested for any of the offenses listed, but has not been charged or tried, shall be denied access. The disposition date (the date charges are finalized in court) will be used to determine the beginning of the debarment period for those personnel seeking employment on base. This applies to the Criminal History Summary received by the Welcome Center. Otherwise, the disposition date of the debarment is determined by the JBMDL/CC.

Passes and Badges.

All Contractor employees shall obtain the required employee and vehicle passes. Vendor personnel are highly encouraged to obtain DBIDS access cards as soon as practicable after award since day passes will not be issued during times when the criminal history system is inoperative and vendor personnel without current DBIDS Cards may be denied entry. When an employee leaves the Contractor’s services, the employee’s DBIDS Card shall be returned within 5 days.

All truck deliveries must have a Bill of lading with Jessica Escribano (732) 323-4550 listed as contact person. Rental vehicles must also have a valid driver's license as specified above and a valid rental agreement. Vehicle Operators that cannot produce Required Documentation WILL NOT be granted access.

Prior to entering JB MDL, commercial/over-sized vehicles shall be inspected at the commercial gate located on Highway 547 at the Lakehurst area. The Contractor shall anticipate delays during the inspection process as well as delays due to vehicle queues.

For additional requirements related to the REAL ID Act that enacted the 9/11 Commission's recommendation that the Federal Government "set standards for the issuance of sources of identification, please refer to http://www.dhs.gov/secure-drivers-licenses.

Delivery Process. The offeror shall receive and inspect all product and material deliveries at a secure, alternative site off Government property and submit the respective Receiving Report, to include packing slip documentation, through Wide Area Work Flow. On the government approved installation date, the offeror shall commence delivery and installation of the furniture at NAWCAD Lakehurst. Manufacturer will repair, or at its option, replace, any defective merchandise discovered during the installation phase free of charge to the Government and in accordance with applicable product warranties.

Environmental Protection. The Contractor shall comply with all applicable federal, state, and local laws, and with the regulations and standards. All environmental protection matters shall be coordinated with the Contracting Officer. Inspection of any of the facilities operated by the Contractor may be accomplished be the Environmental Division personnel, or authorized officials on a no-notice basis during normal working hours. In event that a regulatory agency assesses a monetary fine against the Government for violations caused by Contractor negligence, the Contractor shall reimburse the Government for the amount of that fine and other costs. The Contractor shall also clean up any oil spills that result from the Contractor’s operations. The Contractor shall comply with the instructions of the Navy Industrial Hygienist with respect to avoidance of conditions which create a nuisance or which may be hazardous to the health of military or civilian personnel. The Contractor shall provide a list of all Hazardous Materials to be used on the project and Safety Data Sheets (SDS) for each material listed shall also be provided. SDS sheets must also be displayed on-site for access by Contractor employees as well as the Government, per OSHA requirements.

Energy. In accordance with CNO and Joint Base Energy policies to reduce utility consumption, thermostat settings shall remain 78 degrees in the cooling season and 68 degrees in the heating season. Contractor will eliminate unnecessary plug loads and turn off any electrical items at the end of the business day.

Disposal. Debris, rubbish, hazardous waste and non-usable material resulting from the work under this contract shall be disposed of by the Contractor at their expense off Government property. All recyclable materials; aluminum and metal cans, glass bottles and jars, plastic bottles, newspapers, cardboard, high grade paper, mixed paper, scrap metal, scrap lumber, pavement debris, and vegetation wastes shall be segregated, removed from the station, and disposed of in accordance with New Jersey State recycling and solid waste management regulations. Hazardous waste must be disposed of in accordance with the Resource Conservation and Recovery Act and its associated state and local regulations.

As-Built Drawings.

The Contractor shall prepare and deliver to the Government prior to final payment a set of record drawings in AutoCAD format (employing the NAVAIR AutoCAD Layer List standards) that shows the actual as-built conditions of the project to include NMCI Jack identification for all workstations, printer areas and any other NMCI Jack locations installed by the Contractor.

Furniture Specifics.

Qualifications. All furniture shall be Trade Agreements Act compliant. Furniture installer must have a minimum of five years documented experience in performing work of similar nature to that specified here within. Installer must be approved by the manufacturer to ensure all warranty coverage is provided.

Product installation. Install components and accessories in accordance with manufacturer's instructions. Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits. Adjust doors, drawers, hardware, fixtures, and other moving or operating parts to function smoothly. Remove protective covering from finished surfaces. Touch-up, repair or replace damaged products.

Furniture and Accessories Product warranty. Manufacturer must warrant to the original purchaser that the products described in its price lists will be free from defects in materials and workmanship commencing with the date of initial purchase and continuing for as long as the original owner uses these products. The warranty applies to normal three-shift office use, except for wood casework and seating. Wood casework and seating is warranted for single shift, standard commercial usage, defined as a standard eight (8) hour day, forty (40) hour week for users weighing up to 300 pounds. Comprehensive warranty will apply to all products installed or reconfigured by an authorized installer. Manufacturer will repair, or at its option, replace defective merchandise, free of charge, which, when used normally and pursuant to published instructions, and applicable planning guide information, prove to be defective within the period stated. The following minimum warranty periods shall be provided:

Wood casework is warranted to be free from defects in workmanship, given normal use and care for as long as the original customer owns and uses the product;

Systems Furniture Panel and Tackboard Textiles, Tasklights – 10 years;

All other System Furniture parts – Lifetime + Non Obsolescence Warranty;

Metal Storage and Filing, Laminate Desks, Laminate Tables, and Metal Leg Components – Lifetime;

Electrical Devices, Panel and Tackboard Fabrics, Coat Trees and Task Lights – 5 years;

Height-Adjustable Tables – 5 years;

Height-Adjustable Table Motorized Parts – 2 years;

Seating pneumatic cylinders, bases, casters, glides, frames, arms, plastic seats, backs and other structural components – Lifetime to original owner;

Seating Control Mechanisms – 12 years;

Seating Foam, Upholstery, textiles, and mesh – 5 years.

0. Style A Systems Furniture partitions to be Evolve System segmented panels, or equivalent, 65-inch height, base electric and integral communications modules, with aluminum Charcoal trim, upper fabric segments in Tek “Finesse” and bottom fabric in “Smoke”, Laminate Avant Honey AWH Woodgrain finish all applied pulls will be Bar Silver Handle option, all grommets shall be silver, silver Height Adjustable bases, brushed silver locks, segmented panels 24/12/24. Panels adjacent to designated printer area shall be laminate woodgrain finish.

0. Style B Systems Furniture partitions to be Evolve System monolith panels, or equivalent, 65-inch height, base electric and integral communications modules, with aluminum Charcoal trim, all fabric in Tek “Finesse,” Laminate Absolute Acajou ACJ Woodgrain finish, all applied pulls will be Bar Silver Handle option, all grommets shall be silver, silver Height Adjustable bases, brushed silver locks. Panels along major aisle shall be laminate woodgrain finish.

0. Additional systems furniture requirements are as follows:

Designed for ease of reconfiguration and consist of repositionable panels;

Designed for ease of installation, tear down and relocation to future facilities;

Designed for integration of technology, telecom and power requirements;

Designed for professional office aesthetics, quality and durability;

Designed for noise absorption in open office environment;

All storage units located within an individual workarea shall be lockable, keyed alike with a separate key provided for each lock.

Product Descriptions.

Private Office Suite. Private Office Suite casework shall be Global Zira Laminate line (except where specifically indicated), or equivalent, composed of 45 lb. density particleboard substructure with high performance thermally fused laminate in Avant Honey Woodgrain finish. All tops shall be 1-inch thick with standard flat edge. Private Office Suite will consist of the following:

One (1) FreeFit Extended Range 90 degee Base Freestanding Height-Adjustable (HA) Table – electrically-operated dual stage, HA Table (HA range from 27.5 to 47 inches), or equivalent, Silver “C-foot” base, with one (1) 72-inch by 30-inch Avant worksurface and one (1) 60-inch by 24-inch worksurface, in Avant Honey Woodgrain finish, standard glides, display control pad, matching Zira Laminate top, ¾ modesty panel, all required mounting hardware, metal wire management system, mounted surge protector, Foli 48-inch wide anti-fatigue mat (20 inch deep), or equivalent, ES Robbins Everlife Chair Mat, 46” x 60” rectangle, or equivalent and 3-gallon Rubbermaid office waste basket, or equivalent in black.

One (1) Princeton 20.9-inch high deep Mobile Pedestal – Box/File Configuration, or equivalent with pencil tray and cushion top in Montana Enviro Leather “Mountain Indigo” Global Grade 4 bleach cleanable vinyl;

One (1) Zira Personal Tower with Doors– 24-inch depth, 36-inch width, and 66-inch height, or equivalent in box/box/file configuration and cupboard includes two 3-position shelves, the wardrobe includes a hanging rod;

One (1) Princeton Freestanding Return for use as a credenza, laminate 12-inch modesty panel, laminate end panels, 72-inch wide, 24-inch deep, 29-inch high, or equivalent, thermally fused laminate, 1-inch thick top with standard flat edge, center grommet in silver;

One (1) Zira 72-inch wide closed hutch with Laminate Doors, or equivalent, 15-inch depth, 35-inch height, fixed shelf, includes one grommet and flexible sweep for wire management with appropriately sized tackboard in Momentum Cover Cloth “Indigo.”

One (1) LED Desk Lamp – Global Revo LED Desk Lamp, or equivalent, with optional USB Base and occupancy sensor in Silver finish;

One (1) Executive Task Chair – Global Aspen High Back Multi-Tilter (Model # 2851-3), or equivalent, fully upholstered in Montana Enviro Leather “Mountain Indigo” Global Grade 4 bleach cleanable vinyl (500,000 Wyzenbeek), standard height and width adjustable arms, Black frame, 5-inch cylinder type, 2.5-inch black caster for carpeted surfaces, standard foam seat, rated up to 300 pounds;

Four (4) Standard Guest Chairs – Global Vion Armchair, (Model # 6325C), or equivalent, Black Back Frame, Black Mesh back, Black standard 4 Legged Base with 2-inch Dual Wheel Carpet Casters, Grade 4 Momentum Bleach Cleanable EPU seat in “Lake” (900,000 Wyzenbeek), rated up to 300 pounds;

One (1) Swap Table, 48-inch diameter, 28.5-inch height with round base, or equivalent, 1-inch high performance thermally fused laminate top in Avant Honey AWH with matching edge, Tungsten TTU Base.

Freestanding Lab Furniture Workareas shall consist of the following:

One (1) FreeFit Freestanding Height-Adjustable (HA) Table – electrically-operated dual stage, HA Table (HA range from 27.5 to 47 inches), or equivalent, Silver “C-foot” base, 72-inch by 30-inch, standard glides, display control pad, high performance thermally fused laminate in Avant Cherry Woodgrain finish, all required mounting hardware, metal wire management system, mounted surge protector, Foli 48-inch wide anti-fatigue mat (20 inch deep), or equivalent, and ES Robbins Everlife Chair Mat, 46” x 60” rectangle, or equivalent;

One (1) LED Desk Lamp – Global Revo LED Desk Lamp, or equivalent, with optional USB Base and occupancy sensor in Silver finish;

One (1) Mobile Lateral File – Great Openings Molly Mobile Storage Unit with Cushion, or equivalent, 22-inch high, 18-inch deep, 30-inch wide, open shelf configuration, satin nickel bar pull, in Medium Metallic Grey, K Series locks, cushion fabric to be Grade 3 Montana “Black” MTA294 bleach cleanable vinyl (1,300,000 Wyzenbeek);

One (1) Mobile Personal Storage Companion – Great Openings Yogi Double Bin Unit, or equivalent, open shelf configuration, dual durometer 75mm black/grey locking casters (2L/2NL), shelves include felt liners, in Bracing Blue;

One (1) Mobile Wardrobe Storage Tower – Great Openings Trace Mobile Wardrobe Tower (Cupboard file/file configuration, 54-3/4-inch height), or equivalent providing wardrobe, drawer, and cupboard storage in a single mobile cabinet constructed of painted metal in Medium Metallic Grey, four black standard casters - two (2) locking and two (2) non-locking, Right-Hand version (wardrobe on the right side), drawers and doors shall have one common lock (K-series), full pull;

One (1) Standard Task Chair - Global Vion Chair (Model # 6322-8), or equivalent with mid back in black mesh, weight sensing synchro-tilter, pneumatic seat height, seat depth, and multi-position tilt lock, adjustable 'T'-arm in black, black base, black polypropylene with steel uprights frame, breathable mesh back, seat with seamless waterfall design, Black Grade 4 Enviro Leather California Faux Leather Bleach Cleanable TPE blend seat (500,000 Wyzenbeek), optional lumbar support pad, 5-inch low rise cylinder, Carpet casters of reinforced nylon shall be standard, rated up to 300 pounds.

One (1) Global Industrial Interion Mobile Office Partition Panel, or equivalent, 36-inch wide, 75-inch high, 1-3/4" thick upholstered panel features an interior engineered wood (MDF) frame and honeycomb core in Blue tackable, flame retardant fabric, with black steel T-legs on sturdy 3-inch locking swivel casters.

Style A Standard Systems Furniture Workarea. Style A Standard Systems Furniture Workareas shall consist of systems furniture enclosure with the following components and storage identified below. Panels must enclose a 7-foot by 6-foot workarea and provide a minimum 3-foot opening. Bottom open tiles against the wall must be utilized to access data and telephone terminals. Storage shall be Global Princeton or Zira Laminate lines as indicated, or equivalent, composed of 45 lb. density particleboard substructure with high performance thermally fused laminate with Custom Grey storage bodies and Avant Honey Woodgrain finish door and drawer fronts. All storage located within an individual workarea shall be lockable, keyed alike with a key provided for each lock. All tops shall be 1-inch thick with standard flat edge. All applied pulls will be Bar Silver Handle option. Each High Grade Systems Furniture Workarea shall include (at a minimum):

One (1) FreeFit Freestanding Height-Adjustable (HA) Table – electrically-operated dual stage, HA Table (HA range from 27.5 to 47 inches), or equivalent, Silver “C-foot” base, 60-inch by 30-inch, standard glides, display control pad, matching Princeton Avant Honey Woodgrain finish Laminate top, all required mounting hardware, metal wire management system, mounted surge protector, ES Robbins Everlife Chair Mat, 46” x 60” rectangle, or equivalent, Foli 48-inch wide anti-fatigue mat (20 inch deep), or equivalent, and Evolve Injection molded frame and die cast base with black rubberized finish mountable Nameplate with two (2) slide-in name cards, steel brackets and fasteners, or equivalent;

One (1) Princeton Credenza, or equivalent - 24-inch depth, 60-inch width, 27-inch height with slot/box/file away from height adjustable table, wire management grommet and internal pass-through behind shelf, and slot/open cubby adjacent to height adjustable table;

One (1) Zira Wardrobe Cabinet, or equivalent – 24-inch depth, 12-inch width, and 66-inch height with hanging rod and Bar Silver Handle;

One (1) LED Desk Lamp – Global Revo LED Desk Lamp, or equivalent, with optional USB Base and occupancy sensor in Silver finish;

One (1) Standard Task Chair - Global Vion Chair (Model # 6322-8), or equivalent with mid back in black mesh, weight sensing synchro-tilter, pneumatic seat height, seat depth, and multi-position tilt lock, adjustable 'T'-arm in black, black base, black polypropylene with steel uprights frame, breathable mesh back, seat with seamless waterfall design, Black Grade 4 Enviro Leather California Faux Leather Bleach Cleanable TPE blend seat (500,000 Wyzenbeek), optional lumbar support pad, 5-inch low rise cylinder, Carpet casters of reinforced nylon shall be standard, rated up to 300 pounds.

Style A Expanded High Grade Systems Furniture Workarea. Style A Expanded High Grade Systems Furniture Workareas shall consist of Global Evolve systems furniture enclosure, or equivalent, with the following components and storage identified below. Panels must enclose approximately 8.5 foot by 6-foot workarea and provide a minimum 3-foot opening. Bottom open tiles shall be utilized to access data and telephone terminals, where necessary. Storage shall be Global Zira and Princeton Laminate line (as specified), or equivalent, composed of 45 lb. density particleboard substructure with high performance thermally fused laminate in Avant Honey AWH Woodgrain finish. All tops shall be 1-inch thick with standard flat edge. All applied pulls will be Bar Silver Handle option. Each High Grade Systems Furniture Workarea shall include (at a minimum):

One locking (1) Evolve Sliding Privacy Door or equivalent – 42-inch width, 66-inch high attached to appropriately adjacent panel, painted frame in Charcoal, acrylic finish;

One (1) FreeFit Freestanding Height-Adjustable (HA) Table – electrically-operated dual stage, HA Table (HA range from 27.5 to 47 inches), or equivalent, Silver “C-foot” base, 72-inch by 30-inch, standard glides, display control pad, matching Princeton Laminate top, all required mounting hardware, metal wire management system, and mounted surge protector, ES Robbins Everlife Chair Mat, 46” x 60” rectangle, or equivalent, Foli 48-inch wide anti-fatigue mat (20 inch deep), or equivalent, and Evolve Injection molded frame and die cast base with black rubberized finish mountable Nameplate with two (2) slide-in name cards, steel brackets and fasteners, or equivalent;

One (1) Princeton Freestanding Return for use as a credenza, laminate 12-inch modesty panel, laminate end panels, 60-inch wide, 24-inch deep, 29-inch high, or equivalent, thermally fused laminate, 1-inch thick top with standard flat edge, center grommet in silver;

One (1) Princeton 20.9-inch high deep Mobile Pedestal – Box/File Configuration, or equivalent, in Avant Honey Woodgrain finish with pencil tray and cushion top in Grade 4 Momentum Bleach Cleanable EPU seat in “Lake” (900,000 Wyzenbeek);

One (1) Princeton 25.5-inch high Mobile Lateral File, shelf, box, file configuration, or equivalent, 22-inch deep, 35-inch wide;

One (1) Princeton 60-inch wide hutch with Laminate doors, open frame leg in Tungsten Finish, or equivalent, 16-inch deep, 35-inch high, with appropriately sized tackboard in Momentum Cover Cloth “Vessel”.

One (1) Zira Wardrobe Cabinet, or equivalent – 24-inch depth, 12-inch width, and 66-inch height with hanging bar and Bar Silver Handle;

One (1) LED Desk Lamp – Global Revo LED Desk Lamp, or equivalent, with optional USB Base and occupancy sensor in Silver finish;

One (1) Alternative Task Chair - Global Sora Chair (Model # 6942), or equivalent, with mid back in Quarry Grey Mesh, weight sensing synchro-tilter, pneumatic seat height, standard seat size, seat depth, and multi-position tilt lock, height and width adjustable 'T'-arm in black, polished aluminum base, black frame, breathable mesh back, seat with seamless waterfall design, Grade 4 Momentum Bleach Cleanable EPU seat in “Lake” (900,000 Wyzenbeek), adjustable lumbar support, Soft Descent 4” travel pneumatic lift, Carpet casters of reinforced nylon shall be standard, rated up to 300 pounds.

High Grade Freestanding Set. High Grade Freestanding casework shall be Global Princeton or Zira Laminate lines as indicated, or equivalent, composed of 45 lb. density particleboard substructure with high performance thermally fused laminate in Avant Honey Woodgrain Laminate. All tops shall be 1-inch thick with standard flat edge. High Grade Freestanding Set will consist of the following:

One (1) FreeFit Extended Range 90 degee Base Freestanding Height-Adjustable (HA) Table – electrically-operated dual stage, HA Table (HA range from 27.5 to 47 inches), or equivalent, Silver “C-foot” base, with one (1) 72-inch by 30-inch worksurface and one (1) 60-inch by 24-inch worksurface, in Avant Honey Woodgrain finish, standard glides, display control pad, matching Princeton Laminate top, ¾ modesty panel, all required mounting hardware, metal wire management system, mounted surge protector, Foli 48-inch wide anti-fatigue mat (20 inch deep), or equivalent, ES Robbins Everlife Chair Mat, 46” x 60” rectangle, or equivalent.

One (1) Princeton 20.9-inch high deep Mobile Pedestal – Box/File Configuration, or equivalent in Avant Honey Woodgrain finish with pencil tray and cushion top in Grade 4 Momentum Bleach Cleanable EPU seat in “Lake” (900,000 Wyzenbeek);

One (1) Zira Wardrobe Cabinet, or equivalent – 24-inch depth, 12-inch width, and 66-inch height with hanging bar and Bar Silver Handle;

One (1) Princeton 29-inch high Credenza, 60-inch wide, 24-inch deep, with slot, box, file configuration and open storage adjacent to height adjustable table, or equivalent, thermally fused laminate, 1-inch thick top with standard flat edge in Avant Honey Woodgrain finish, grommet in silver;

One (1) Princeton 60-inch wide hutch with Laminate doors, open frame leg in Tungsten Finish, or equivalent, 16-inch deep, 35-inch high, Avant Honey Woodgrain finish, with appropriately sized tackboard in Momentum Cover Cloth “Vessel”.

One (1) LED Desk Lamp – Global Revo LED Desk Lamp, or equivalent, with optional USB Base and occupancy sensor in Silver finish;

One (1) Alternative Task Chair - Global Sora Chair (Model # 6942), or equivalent with mid back in Quarry Grey Mesh, weight sensing synchro-tilter, pneumatic seat height, standard seat size, seat depth, and multi-position tilt lock, height and width adjustable 'T'-arm in black, polished aluminum base, black frame, breathable mesh back, seat with seamless waterfall design, Grade 4 Momentum Bleach Cleanable EPU seat in “Lake” (900,000 Wyzenbeek), adjustable lumbar support, Soft Descent 4” travel pneumatic lift, Carpet casters of reinforced nylon shall be standard, rated up to 300 pounds.

Tall Storage Unit. Tall Storage Unit shall be Global Prime 5-high storage cabinet, 36-inch wide, 18-inch deep and 65.6-inch high, or equivalent, 18-22 gauge cold-rolled steel, integral leveling glides, locking, one fixed shelf and four adjustable shelves in electrostatically applied durable coating in Charcoal finish.

Low Storage Unit with Worksurface. Low Storage Unit with Worksurface shall be Global Prime three-high storage cabinet, 36-inch wide, 18-inch deep and 39-inch high, or equivalent, with high performance thermally fused laminate worksurface in appropriate Woodgrain finish and edge trim to match destination (Building 5 - Avant Honey AWH or B678 - Absolute Acajou ACJ). Top shall be sized to match storage unit. Storage unit construction of 18-22 gauge cold-rolled steel, integral leveling glides, locking with counterweight, one fixed shelf and two adjustable shelves in electrostatically applied durable coating in Charcoal finish.

Printer Area. Printer Areas shall consist of one two-drawer Lateral file with high performance thermally fused laminate worksurface, or equivalent in appropriate Woodgrain finish and edge trim to match destination (Building 5 - Avant Honey AWH or B678 - Absolute Acajou ACJ). Top shall be sized to match lateral file and without grommets. Lateral file construction of 18-22 gauge cold-rolled steel, integral leveling glides, locking with counterweight, in electrostatically applied durable coating in Charcoal finish with the following features –accommodate legal or letter file sizes in side-to-side orientation. Positive interlocking system to prevent tipping, full extension ball bearing suspensions, anti-bounce back safety feature to prevent drawers from sliding open.

Collaborative Whiteboard Cart. Collaborative Whiteboard Cart shall be Global Collaborative Spaces 48-inch wide double sided whiteboard cart, or equivalent with Avant Honey Woodgrain finish shelf, metal paint Charcoal finish with Designer White backboards, and Optional Media Tray.

Collaboration Media Cart Set shall include the following:

One (1) Global Collaborative Spaces 60-inch wide media cart, Internal power Bar with Avant Honey Woodgrain finish backboard/edge, Black laminate shelves, black casters, charcoal metal trim, one (1) Optional Media Tray and one (1) Optional Laptop Shelf, or equivalent;

One (1) Global Collaboration Spaces 36-inch high Workshop Table, 54-inch wide by 42-inch deep with Casters with Avant Honey Woodgrain finish top with matching edge, charcoal legs, bungee base, black casters, center position electrical power cut-out for an optional SCTAPS Nik-in Power Module, or equivalent;

Four (4) Global Vion Drafting Stools (Model # 6328-6), or equivalent with Black Mesh back, synchro-tilter with back angle adjustment to include seat slider control mechanism, adjustable 'T'-arm in black, black base, black polypropylene with steel uprights frame, breathable mesh back, seat with seamless waterfall design in Grade 4 Momentum Bleach Cleanable EPU seat in “Lake” (900,000 Wyzenbeek)carpet casters of reinforced nylon shall be standard, rated up to 300 pounds.

Executive Wood Office Desk – Remove existing equivalent furnishings and provide new JSI Brogan freestanding wood furniture (Scalloped Trim) in Cherry Classic flat cut, symmetrical book-matched veneer finish with protective DuraTex top coat. All exterior solid lumber shall be matched to coordinate with the veneer. Tops shall be 5-ply balanced construction, 1 3/16 inch thick with solid matching hardwood edges. Construction shall be mortise and tenon reinforced with screws with leveling glides set in solid hardwood to prevent tear out. End panels shall be 13/16-inch thick with 3-ply construction rimmed with veneer bands. Drawers shall be assembled with hardwood dovetailed box and ¼-inch thick bottom with exterior front attached separately. Interiors shall be sanded and finished with clear catalyzed varnish. Drawer suspensions shall carry lifetime warranty and include steel ball bearings and cushioned in/out stops. All pull/hardware shall be Gala Antique Brass. All desk and credenza drawers within each room shall be lockable and cored alike. All worksurfaces shall be of sufficient thickness and appropriately braced according to manufacturer specifications to prevent warping. Workarea shall include (at a minimum):

Executive Double Pedestal Wood Desk shall be JSI Brogan Executive Desk ((36-inch by 72-inch with Scalloped Trim), or equivalent in flat cut, symmetrical book-matched veneer finish with protective DuraTex top coat with two (2) additional antique brass grommets (A and C locations), 3-in overhang on each end and 6-in overhang on the approach end, writing shelf, tray, box, file configuration, with legal width pedestal, locking center drawer, and custom fitted clear glass to match top.

RESERVED

Executive Conference Table. Executive Conference Table shall be JSI Brogan Conference Table (42-inch width by 96-in length) with two (2) panel bases and stretcher panel, or equivalent, in flat cut, symmetrical book-matched veneer finish with protective DuraTex top coat, scalloped trim and custom fitted clear glass to match top.

One (1) Executive Task Chair – Global Auburn, or equivalent, fully upholstered with black frame/base, standard casters and seat foam, 4-inch low rise cylinder in Black Global Grade 2 Luxhide bleach cleanable vinyl, rated up to 300 pounds;

Two (2) Standard Guest Chairs – Global Vion Armchair, (Model # 6325C), or equivalent Black Mesh back, standard 4 Legged Base with 2-inch Dual Wheel Carpet Casters, Black Back Frame, Black Grade 4 Enviro Leather California Faux Leather Bleach Cleanable TPE blend seat (500,000 Wyzenbeek), rated up to 300 pounds.

One (1) Executive Wood Office Suite – Remove existing equivalent furnishings and provide new JSI Brogan freestanding wood furniture (No Trim) in Mocha flat cut, symmetrical book-matched veneer finish with protective DuraTex top coat. All exterior solid lumber shall be matched to coordinate with the veneer. Tops shall be 5-ply balanced construction, 1 3/16 inch thick with solid matching hardwood edges. Construction shall be mortise and tenon reinforced with screws with leveling glides set in solid hardwood to prevent tear out. End panels shall be 13/16-inch thick with 3-ply construction rimmed with veneer bands. Drawers shall be assembled with hardwood dovetailed box and ¼-inch thick bottom with exterior front attached separately. Interiors shall be sanded and finished with clear catalyzed varnish. Drawer suspensions shall carry lifetime warranty and include steel ball bearings and cushioned in/out stops. All pull/hardware shall be Gala Antique Brass. All desk and credenza drawers within each room shall be lockable and cored alike. All worksurfaces shall be of sufficient thickness and appropriately braced according to manufacturer specifications to prevent warping. Workarea shall include (at a minimum):

Executive Double Pedestal Wood Desk shall be JSI Brogan Executive Desk ((36-inch by 72-inch, No Trim), or equivalent in flat cut, symmetrical book-matched veneer finish with protective DuraTex top coat with two (2) additional antique brass grommets (A and C locations), 3-in overhang on each end and 6-in overhang on the approach end, writing shelf, tray, box, file configuration, with legal width pedestal, locking center drawer, and custom fitted clear glass to match top.

Executive Adjustable Height Table Desk. Executive Adjustable Height Table Desk shall be JSI Brogan Executive Electric Adjustable Height Table Desk (30-inch by-60 inch) with one additional antique brass grommet (Location B), Matte Black base finish (MBK) and modesty panel (black sandtex bracket finish), or equivalent, in flat cut, no trim, symmetrical book-matched veneer finish with protective DuraTex top coat with push button control pad with three memory settings, C-leg base preferred, dual articulating monitor arm, under desk wire management system to include power strip, keyboard/mouse tray, and custom fitted clear glass to match top.

Executive Credenza Unit. Executive Credenza shall be JSI Storage Credenza with hinged doors, 66-in wide, 24-in deep, 30-inch high, no trim, or equivalent, with two locking legal width file/file pedestals, grommet located in top center of back panel, in flat cut, symmetrical book-matched veneer finish with protective DuraTex top coat. All worksurfaces shall be of sufficient thickness and appropriately braced according to manufacturer specifications to prevent warping with custom fitted clear glass to match top.

RESERVED

One (1) Executive Task Chair – Global Auburn, or equivalent, fully upholstered with black frame/base, standard casters and seat foam, 4-inch low rise cylinder in Black Global Grade 2 Luxhide bleach cleanable vinyl, rated up to 300 pounds;

Executive Round Conference Table. Executive Conference Table shall be JSI Brogan Conference Table (48-inch diameter) with cabriole base, or equivalent, in flat cut, symmetrical book-matched veneer finish with protective DuraTex top coat, and custom fitted clear glass to match top.

Six (6) Standard Guest Chairs – Global Vion Armchair, (Model # 6325C), or equivalent Black Mesh back, standard 4 Legged Base with 2-inch Dual Wheel Carpet Casters, Black Back Frame, Black Grade 4 Enviro Leather California Faux Leather Bleach Cleanable TPE blend seat (500,000 Wyzenbeek), rated up to 300 pounds.

Style B Standard Systems Furniture Workarea. Style B Standard Systems Furniture Workareas shall match existing workareas in same location to greatest extent possible and consist of systems furniture enclosure with the following components and storage identified below. Panels must enclose a 7-foot by 6-foot workarea and provide a minimum 3-foot opening. Bottom open tiles against the wall must be utilized to access data and telephone terminals. Storage shall be Global Princeton or Zira Laminate lines as indicated, or equivalent, composed of 45 lb. density particleboard substructure with high performance thermally fused laminate in Absolute Acajou ACJ Woodgrain finish. All storage located within an individual workarea shall be lockable, keyed alike with a key provided for each lock. All tops shall be 1-inch thick with standard flat edge. No chairs are required. Each Standard Systems Furniture Workarea shall include (at a minimum):

One (1) FreeFit Freestanding Height-Adjustable (HA) Table – electrically-operated dual stage, HA Table (HA range from 27.5 to 47 inches), or equivalent, Silver “C-foot” base, 60-inch by 30-inch, standard glides, display control pad, matching Princeton Laminate top, all required mounting hardware, metal wire management system, and mounted surge protector, Evolve Injection molded frame and die cast base with black rubberized finish mountable Nameplate with two (2) slide-in name cards, steel brackets and fasteners, or equivalent, and ES Robbins Everlife Chair Mat, 46” x 60” rectangle, or equivalent.

Two (2) Zira Box/Box/File Pedestals, or equivalent – 24-inch depth, 15-inch width, and 29.5-inch height, each with pencil tray and common top;

One (1) Zira Wardrobe Cabinet, or equivalent – 24-inch depth, 12-inch width, and 66-inch height with Bar Silver Handle;

One (1) LED Desk Lamp – Global Revo LED Desk Lamp, or equivalent, with optional USB Base and occupancy sensor in Silver finish;

Style B Expanded High Grade Systems Furniture Workarea. Style B Expanded High Grade Systems Furniture Workareas shall match existing workareas in same location to greatest extent possible and consist of Global Evolve systems furniture enclosure with full height laminate panels immediately adjacent to the designated high traffic area, or equivalent with the following components and storage identified below. Panels must enclose approximately 9-foot by 7-foot workarea and provide a minimum 3-foot opening. Fabric shall be Evolve Tek Panel Fabric in “Finesse.” Low or open bottom tiles shall be utilized to access thermostat data and telephone terminals, where necessary. Storage shall be Global Zira and Princeton Laminate line (as specified), or equivalent, composed of 45 lb. density particleboard substructure with high performance thermally fused laminate in Absolute Acajou ACJ Woodgrain finish. All tops shall be 1-inch thick with standard flat edge. Where multiple storage units are specified, ensure one continuous surface. All applied pulls will be Bar Silver Handle option. All storage located within an individual workarea shall be lockable, keyed alike with a key provided for each lock. No Task Chair Required. Each High Grade Systems Furniture Workarea shall include (at a minimum):

One locking (1) Evolve Sliding Privacy Door, or equivalent – 42-inch width, 66-inch high attached to appropriately adjacent panel, painted frame in Charcoal, acrylic finish;

One (1) FreeFit Freestanding Height-Adjustable (HA) Table – electrically-operated dual stage, HA Table (HA range from 27.5 to 47 inches), or equivalent, Silver “C-foot” base, 60-inch by 30-inch, standard glides, display control pad, matching Princeton Laminate top, all required mounting hardware, metal wire management system, and mounted surge protector, Evolve Injection molded frame and die cast base with black rubberized finish mountable Nameplate with two (2) slide-in name cards, steel brackets and fasteners, or equivalent, and ES Robbins Everlife Chair Mat, 46” x 60” rectangle, or equivalent.

One (1) Zira Wardrobe Cabinet, or equivalent – 24-inch depth, 12-inch width, and 66-inch height with hanging bar and Bar Silver Handle;

Two (2) Zira Box/Box/File Pedestals, or equivalent – 24-inch depth, 15-inch width, and 29.5-inch height, each with pencil tray;

One (1) Zira Storage Cabinet, or equivalent – 24-inch depth, 12-inch width, and 29.5-inch , or height;

One (1) Princeton 72-inch wide hutch with Laminate Doors, open frame leg in Tungsten Finish, with appropriately sized tackboard in Momentum Cover Cloth “Platinum,” or equivalent;