Attachment 0006 - Certified Material Analysis Igniter O-Ring.pdf
PDF 153 KB Posted
- Attached to
- MJU-67B O-Rings
- Solicitation number
- W519TC-23-Q-ORNG
About this file
This document is a certified material analysis report for O-rings required under solicitation number W519TC-23-Q-ORNG. The Army Materiel Command Contracting Command Rock Island Arsenal is seeking NBR O-rings with a PTFE coating meeting specifications for SAE AS 83461/1, Part No. M83461/1-122 except for durometer requirements. Acceptable O-rings must have a nitrile compound, 75±10 durometer hardness, an inside diameter of 1.112±0.010 inches, and width of 0.103±0.003 inches. Documentation of the specific compound and durometer test results must be provided with each delivery to the Crane Army Ammunition Activity. The report outlines required test data to be included on certificates of analysis supporting material compliance, such as manufacturer information, purchase order number, quantity, test results, sampling details, and authorized representative signature.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CERTIFIED MATERIAL TEST REPORT / CERTIFICATE OF ANALYSIS
For those material(s) identified below, a Certificate of Analysis (C of A) test report shall be provided to the government at time of delivery to CAAA (Crane Army Ammunition Activity).
The test results contained on the Certificate of Analysis report(s) shall be adequate to determine compliance with all applicable requirements of the material specification(s) listed below. Availability of the Certificate of Analysis may be in addition to other Purchase requirements and does not reduce or prejudice the Government’s right to inspect supplies under other provisions of this contract.
The test report(s) shall contain the following:
a. Name and address of Manufacturer and Supplier when *applicable.
(*If not manufactured by the Supplier.)
b. Purchase order number.
c. Identification of material by specification, revision, amendment and dates, together with type, grade, size etc. number.
d. Quantity of material.
e. Material testing results shall address drawing specifications.
Drawing: 3677AS166 Rev. E Note 2 O-Ring Compound Shall Meet the Requirements of SAE AS 83461/1, Part No. M83461/1-122 Except for Durometer requirements.
Product - O-Ring Description - NBR O-Ring W/PTFE Coat Compound - Nitrile (N756) Durometer - 75 +5 / - 10 Inside Diameter - 1.112 ± .010 Width - .103 ± .003
Documentation to support above specifications (Specific Compound Material used and Durometer Testing Result) shall be included with O-Rings at time of delivery to CAAA. Durometer NOT tested at CAAA, acceptance will be made per receiving documentation.
f. Quantity tested, sample size, and specimen type as applicable.
g. Date, signature, and title of the authorized representative of the contractor that is attesting to the accuracy of test report content.
Component O-Ring
Requirements For MJU-67/B Program
01 August, 2023.
jacqueline.harper Jackie's
File details come from the government source that posted it. Updated .