Attachment 0005 - Certified Material analysis -025 O-RING.pdf
PDF 152 KB Posted
- Attached to
- MJU-67B O-Rings
- Solicitation number
- W519TC-23-Q-ORNG
About this file
This document contains a certified material test report and certificate of analysis for O-rings to be supplied under solicitation number W519TC-23-Q-ORNG. The report specifies that the O-rings must meet drawing 3904AS133 Rev. B, be made from nitrile rubber compound per SAE AS 83461/1 with a durometer of 75 +/- 10, and include documentation of the specific compound used and durometer test results. The O-rings will be delivered to the Crane Army Ammunition Activity, where acceptance will be based on the receiving documentation rather than retesting durometer. The solicitation is seeking O-rings for the MJU-67B program and was issued by the Department of the Army Materiel Command Contracting Command Rock Island Arsenal.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CERTIFIED MATERIAL TEST REPORT / CERTIFICATE OF ANALYSIS
For those material(s) identified below, a Certificate of Analysis (C of A) test report shall be provided to the government at time of delivery to CAAA (Crane Army Ammunition Activity).
The test results contained on the Certificate of Analysis report(s) shall be adequate to determine compliance with all applicable requirements of the material specification(s) listed below. Availability of the Certificate of Analysis may be in addition to other Purchase requirements and does not reduce or prejudice the Government’s right to inspect supplies under other provisions of this contract.
The test report(s) shall contain the following:
a. Name and address of Manufacturer and Supplier when *applicable.
(*If not manufactured by the Supplier.)
b. Purchase order number.
c. Identification of material by specification, revision, amendment and dates, together with type, grade, size etc. number.
d. Quantity of material.
e. Material testing results shall address drawing specifications.
Drawing: 3904AS133 Rev. B
Specifications: Product - O-Ring, -025.
Compound IAW SAE AS 83461/1 (Nitrile).
Durometer - 75 +5 / - 10
Dimensional Specification: IAW 3904AS133 Rev. B
Documentation to support above specifications (Specific Compound Material used and Durometer Testing Result) shall be included with O-Rings at time of delivery to CAAA. Durometer NOT tested at CAAA, acceptance will be made per receiving documentation.
f. Quantity tested, sample size, and specimen type as applicable.
g. Date, signature, and title of the authorized representative of the contractor that is attesting to the accuracy of test report content.
Component O-Ring
Requirements For MJU-67/B Program
01 August, 2023 jacqueline.harper Jackie's
File details come from the government source that posted it. Updated .