Attachment 0002 Special Packaging Instructions (SPI).pdf
PDF 52 KB Posted
- Solicitation number
- PANDTA_26_P_0000_035558
- Issued by
-
Department of the Army
About this file
This is a Special Packaging Instruction document for a Wiring Harness Assembly (Part No. 12592423, National Stock No. 6150-01-702-7450). The document specifies detailed packaging and preservation requirements for this single unit of issue item, which weighs 4.4 pounds and measures 20.3 x 20.3 x 4.4 inches when packed. The item dimensions are 149.5 x 69.0 x 2.0 inches with a unit pack weight of 1.049 pounds, and the document was effective as of December 4, 2024.
The packaging instructions mandate compliance with MIL-STD-2073-1 (Method 41) for military preservation and include six specific steps: capping or wrapping cable assembly ends per MIL-PRF-22191 or A-A-3174 specifications; securing branching cables with twine or cable ties and coiling to approximately 20-inch diameter; bagging in MIL-DTL-117 Type I Class E bags; filling void spaces with approved cushioning materials (kraft paper, cellular plastic, or polypropylene foam); placing in ASTM D5118/D5118M containers; and sealing per ASTM D1974/D1974M Method B. The document also requires cleaning and drying per MIL-STD-2073-1 paragraph 5.2.1 and marking per MIL-STD-129. All referenced standards and specifications in effect on the solicitation date form part of these instructions.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Amendment 0001-Change to Proposal Due Date.pdf | ||
| Contractor Questions PANDTA-26-P-0000 035558.xlsx | XLSX spreadsheet | |
| Exhibit A Contract Data Requirements List (CDRL) A001-A004.pdf | ||
| Attachment 0003 First Article Test Waiver.pdf | ||
| BOAST RFOP Branched Wiring Harnesses PANDTA-26-P-0000 035558.xlsx | XLSX spreadsheet |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Page 1 of 1 Page(s)
SPECIAL PACKAGING INSTRUCTION
1. PART OR DRAWING NO. NOMENCLATURE 2. CODE IDENT 3. SPI NO.
12592423 WIRING HARNESS ASSEMBLY 1W609-20 19207 AM12592423
4. NATIONAL STOCK NO. 5.DATE OF
DRAWING/SPI(YYMMDD)
6. REVISION / ERR NO.
6150-01-702-7450 241204 - / L24K2314
7. QUP / UNIT OF ISSUE 8. ICQ 9. UNIT PACK WT. (LB) (0.0) 10. UNIT PACK CU (CU.
FT.)(0.000)
11. UNIT PACK SIZE (INCHES)(00.0)
1/EA 6.1 1.049 20.3 X 20.3 X 4.4
18.
STEPS
19.
REQD
20.
DESCRIPTION
12. MILITARY PRESERVATION 1 AR CAPS/PLUGS: SEE NOTE A
MIL-STD-2073-1, METHOD 41 2 AR ITEM PREPARATION: SEE NOTE B
13. CLEANING 3 1 BAG: MIL-DTL-117, TYPE I, CLASS E
* 4 AR VOID FILL: SEE NOTE C
14. DRYING 5 1 CONTAINER: ASTM D5118/D5118M, STYLE OPF
* OR RSC, GRADE W5c
15. PACKING 6 AR CLOSURE: ASTM D1974/D1974M, SEALING
a. LEVEL A METHOD B
MIL-STD-2073-1
b. LEVEL B
MIL-STD-2073-1
16. MARKING
MIL-STD-129
17. NOTES/DRAWING
SPECIFICATIONS, STANDARDS AND DRAWINGS LISTED HEREIN WHICH ARE IN EFFECT ON THE DATE OF THE SOLICITATION FORM A PART OF THIS PACKAGING INSTRUCTION. THE APPLICABLE GENERAL AND REFERENCED REQUIREMENTS OF SPECIFICATION MIL-STD-2073-1 FORM PART OF THESE INSTRUCTIONS. UNLESS OTHERWISE SPECIFIED, MATERIALS WILL BE MINIMUM SIZE IN ACCORDANCE WITH MIL-STD-2073-1. WEIGHTS AND SIZES ARE ESTIMATED AND MAY VARY SLIGHTLY. INTERMEDIATE PACKAGING AND PACKING WILL BE IN ACCORDANCE WITH
SPECIFICATION MIL-STD-2073-1 OR AS OTHERWISE SPECIFIED HEREIN.
TOLERANCES SHALL BE IN ACCORDANCE WITH MATERIAL SPECIFICATIONS. QUALITY PERFORMANCE AND TESTING REQUIREMENTS SHALL BE IN CONFORMANCE WITH MIL-STD-2073-1, OR AS OTHERWISE SPECIFIED.
* UNLESS OTHERWISE SPECIFIED, CLEANING AND DRYING SHALL BE IN ACCORDANCE WITH PARAGRAPH 5.2.1 OF MIL-
STD-2073-1.
A. CAP ENDS OF THE CABLE ASSEMBLY WITH PROTECTIVE CAPS IF APPLICABLE. IF NO CAPS ARE PROVIDED, WRAP ENDS OF CABLE ASSEMBLY, ENSURING THE WRAP EXTENDS PAST THE END OF THE CABLE ASSEMBLY BY 4 INCHES. THE WRAP SHALL CONFORM TO ONE OF THE FOLLOWING SPECIFICATIONS: MIL-PRF-22191, TYPE III; OR A-A-3174, TYPE I OR II. THE WRAPS SHALL BE SECURED WITH WATERPROOF TAPE. ENSURE THE TAPE DOES NOT
COME IN CONTACT WITH THE CABLE ASSEMBLY.
B. SECURE BRANCHING CABLES WITH TWINE, STRING, OR PLASTIC CABLE TIES AS REQUIRED WITHOUT DAMAGING
THE CABLE ASSEMBLY. AFTER SECURING BRANCHING CABLES, COIL ITEM TO APPROXIMATELY 20 INCH DIAMETER AND SECURE WITH TWINE, STRING, OR PLASTIC CABLE TIES IN A MINIMUM OF 3 PLACES PRIOR TO
PLACING IN BAG.
C. FILL VOID SPACE OF THE UNIT CONTAINER WITH SUFFICIENT CRUMPLED KRAFT PAPER, A-A-203; OR CELLULAR PLASTIC FILM CUSHIONING, PPP-C-795, CLASS 1; OR OPEN CELL PLASTIC CUSHIONING, A-A-3129; OR POLYPROPYLENE FOAM CUSHIONING, PPP-C-1797, TYPE I TO PREVENT ITEMS FROM SHIFTING DURING TRANSIT.
WSC: J6 ITEM SIZE: 149.5 X 69.0 X 2.0 ITEM WEIGHT: 4.4 APPROVED: ERIC BYEON
DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.
File details come from the government source that posted it. Updated .