Attachment 0001 Technical Requirements.pdf

Attachment 0001 SPRBL1-21-R-0007 Page 1 of 8 Issue: 24 August 2021

TECHNICAL REQUIREMENTS

Joint Tactical Terminal - Integrated Broadcast Service (JTT-IBS)

Attachment 0001 SPRBL1-21-R-0007 Page 2 of 8

TABLE OF CONTENTS

APPLICABLE DOCUMENTS

CONFIGURATION BASELINE

Obsolescence Reporting

Part Revisions

Performance Requirements

Surge Requirement

CHEMICAL AGENT RESISTANT COATING (CARC)

Paint Colors

Special Instructions

PACKAGING

Wood Packing Material

Military Packaging

SPECIALIZED TESTING

CONTRACT DATA REQUIREMENT LIST (CDRL) DD 1423-1

See EXHIBIT A JTT-IBS CDRL

Attachment 0001 SPRBL1-21-R-0007 Page 3 of 8

APPLICABLE DOCUMENTS

Military and Federal Standards MIL-STD-129R w change 2 Military Marking for Shipment and Storage MIL-STD-2073-1E w Change 4 Standard Practice for Miltary Packaging

Military and Federal Specifications

Other Documents AG00000601 CECOM Special Packaging Instruction for Circuit Card and Printed

Circuit Board Assemblies AG00000573 CECOM Special Packaging Instruction for Major Components, Spare/Repair Parts Commercial Documents ISPM-15 Regulation of Wood Packaging Material in International Trade

Security Documents DD254 Department of Defense Contract Security Classificaiton Specification

CONFIGURATION BASELINE

The applicable Configuration Baselines (CB), for the listed Configuration Item (CI) and/or Computer Software Configuration Item (CSCI), are as listed in the table below.

NSN Nomenclature Part Numbers/Drawings

5820-01-695-3227 RECEIVER-TRANSMITTER,RADIO (JTT-IBX) 3014-0001-03-5

5996-01-560-6587 AMPLIFIER,RADIO FREQUENCY (Power Amplifier

(EPA))

3014-0001-17-2

5975-01-559-8215 TRAY,MOUNTING,ELECTRONIC EQUIPMENT (EPA

Tray)

3014-0020-03-2

5975-01-559-8238 TRAY,MOUNTING,ELECTRONIC EQUIPMENT (IBX

Tray)

3014-0019-03-3

5975-01-644-2605 BASE,CHASSIS (IBX Chassis, Base) 3014-0017-03-3

5998-01-669-7923 CIRCUIT CARD ASSEMBLY (PPCIM) 111401-0302

5998-01-669-8527 CIRCUIT CARD ASSEMBLY (AIOM) 111401-0301

5810-01-613-0000 COMMUNICATIONS SECUIRTY MODULE (Receiver

Crypto Module) (RCM) 3412-0001-03-1

5810-01-613-0001 COMMUNICATIONS SECUIRTY MODULE (Transmit Crypto Module (TCM))

3412-0002-03-1

Attachment 0001 SPRBL1-21-R-0007 Page 4 of 8

Obsolescence Reporting

CDRLs A003 and A008, delivery of DMSMS Source Data shall be within 30 days after award of delivery order. Subsequent reports to be submitted quarterly until conclusion of task order.

Part Revisions

The Contractor shall make no changes to or departures from the configuration baseline. In the event that a configuration baseline change proposal is deemed necessary, such proposal shall be subject to CDRLs A005, A006, A012 and A014.

Performance Requirements

Under this Indefinite-Delivery Indefinite-Quantity (IDIQ) contract, the Contractor shall serve as the prime Contractor and shall procure all of the items as ordered by the Government in accordance with this Technical Requirements document.

Quality

The contractor shall perform final Inspection and testing on all deliverables to ensure integration conformance IAW the JTT-IBS specifications. The Government reserves the right to inspect all deliverables prior to Government acceptance. Equipment and facilities required for inspection and testing shall be the Contractor’s responsibility. Any use of non-conforming material must be submitted and approved by the Contracting officer using a Request for Variance (RFV) DI-SESS-

80640E CDRL A012.

Quality of Purchased Products

The contractor shall assure that all purchased products comply with specification requirements.

Hardware Procurement Requirements The Contractor shall supply all items in accordance with the delivery schedule. Items shall be completed, packaged, shipped, and received at the specified ship to location. Supply Turnaround Time shall be from date of delivery order to the date the item arrives at the Government depot.

Surge Requirement The objective of this requirement is to obtain contractual coverage to meet the surge quantities and/or sustainable accelerated delivery IAW Subpart 17.93. Surge requirements may be met through access to production capability as well as contractor-owned or contractor-managed inventory or safety stocks.

Surge capability means the ability of the supplier to meet the increased quantity and/or accelerated delivery requirements, using production and/or supplier base capabilities, to support increased requirements with accelerated delivery. This capability includes both the ability to ramp-up to meet accelerated delivery and/or increased quantities.

Attachment 0001 SPRBL1-21-R-0007 Page 5 of 8

CHEMICAL AGENT RESISTANT COATING (CARC)

Paint Colors X =

Applicable Location Color Color No.

FED-STD 595

Exterior – Lusterless Green

X Exterior – Camouflage – Desert Colors Black 37030

Interior Shelter Surfaces

(White or Green) Other

Special Instructions X =

Applicable Location or Part Instruction Antenna Elements, including protective covers, i.e. fiberglass shields.

Part that conforms to a Government requirement.

Finish as required by the individual part requirement.

Parts subject to temperatures in excess of 400 degrees F (205 degrees C).

Paint with heat resistant paint.

Parts which can be flexed. Do not paint with CARC.

CARC Marking Stencil “CARC” in CARC paint in close proximity to the nameplate using a contrasting color, or use plates or embossed lettering.

Marking shall be durable enough to withstand all environmental conditions during field use.

Attachment 0001 SPRBL1-21-R-0007 Page 6 of 8

PACKAGING

Wood Packing Material Wood Packaging Material in compliance with ISPM-15, Regulation of Wood Packaging Material in International trade, is applicable.

Wood packing material includes pallets. See DLAD 52.247-9012 Requirements for Treatment of Wood Packaging Material (WPM).

Military Packaging DS7029 and/or DS7033 Preservation, Packing and Marking Instructions Military Packaging is applicable.

DS7029 - DS7033 LEGEND

Qty Quantity Prot Req Protection Required PGE-REF Packaging Reference (Military Standard) LPK Level of Packing QUP Quantity per Unit Pack ICQ Intermediate Container Quantity Pkg Reqmt Codes Packaging Requirement Codes when PKG-REF cites MIL-STD-2073 The below codes are for special markings:

PC Project Code WG Warranty/Guarantee SL Shelf Life BC Bar Code FMS Foreign Military Sales

Attachment 0001 SPRBL1-21-R-0007 Page 7 of 8

DS7029 - DS7033

NSN Prot Req PKG-REF or SPI LPK QUP ICQ Special Markings

Pkg J. J J J J J J J J J Reqmt I. II. III. IV. V. VI. VII. VII.a IX X Codes (MP) (CD) (PM) (WM) (CD) (CT) (UC) (IC) (PK) (SM) 5820-01-695-3227 Military AG00000573 42 1 00 00 NA D ED - - - BC 5996-01-560-6587 Military MIL-STD-2073-1 42 1 00 00 NA D ED - - - BC 5975-01-559-8215 Military MIL-STD-2073-1 31 1 00 00 NA B ED - - - BC 5975-01-559-8238 Military MIL-STD-2073-1 31 1 00 00 NA B ED - - - BC 5975-01-644-2605 Military MIL-STD-2073-1 42 1 00 00 NA D ED - - - BC 5998-01-669-7923 Military AG00000601 ZZ Z ZZ ZZ ZZ Z ZZ - - 39 BC 5998-01-669-8527 Military AG00000601 ZZ Z ZZ ZZ ZZ Z ZZ - - - BC 5810-01-613-0000 Military MIL-STD-2073-1 GX 1 00 00 NB D B9 ED - 39 BC 5810-01-613-0001 Military MIL-STD-2073-1 GX 1 00 00 NB D B9 ED - 39 BC

Z = See SPI for requirements.

ZZ = See SPI for requirements.

Attachment 0001 SPRBL1-21-R-0007 Page 8 of 8

SPECIALIZED TESTING: NA

CONTRACT DATA REQUIREMENT LIST (CDRL) DD 1423-1: See Exhibit A: Contract Data Requirement List