Attachment 0001 - Drawings DEV21004 R2.pdf

REV SH DWG NO.

7 6 5 4 x

NAVWPNSUPPCEN-3910/

A

B

C

D

18 DEV21004 R23

APPROVED FOR NSWC CRANEINTERPRET DRAWING

IN ACCORDANCE WITH

ASMY14.100

DO NOT SCALE THIS DRAWING

CRANE DIVISION

NAVAL SURFACE WARFARE CENTER

CRANE, IN 47522-5001

PART SHALL BE FREE OF BURRS

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

THIS DRAWING HAS BEEN GENERATED AND IS

MAINTAINED BY A CAD SYSTEM. CHANGES

SHALL ONLY BE INCORPORATED AS DIRECTED

BY THE GOVERNMENT DESIGN ACTIVITY.

A

USED ONNEXT ASSY

IGNITER BODY

2 2D (3-86)

7 6 5 4 3

SURFACE ROUGHNESS

INSIDE CORNERS

BROKEN EDGES

MAX

2 PLACE DECIMALS ± .01

MAX

3 PLACE DECIMALS ± .005

PROJ ENG

ANGLES ± 1°

ENGINEER

TOLERANCES: IPT LEAD

SHEET 1 OF 1

BY DIRECTION

DEV21004

DEPARTMENT OF THE NAVY

NAVAL SURFACE WARFARE CENTER

CRANE, IN 47522-5001

PREPARED

ENGINEER

DATE

SCALE: 4/1

D

SIZE

12255

CAGE CODE DWG NO.

CLASSIFICATION OF

CHARACTERISTICS (DOD-STD-2101)

CRITICAL - NONE

MAJOR - 2

REV

R2

REV

MINOR - ALL OTHER CHARACTERISTICS

REVISIONS

DESCRIPTION

C O

M P

U T

E R

G E

N E

R A

T E

D

DATE APPROVED

B

C

D

MJU-76/B

NMC WXRL

DISTRIBUTION STATEMENT D:

DISTIBUTION AUTHORIZED TO THE DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY;

CRITICAL TECHNOLOGY; JAN 1993. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO

NAVAL AIR SYSTEMS COMMAND PMA 272, COMMON ASE, JACKSONVILLE, FL 32221.

WARNING:

THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22 U.S.C., SEC 2751, ET. SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED, TITLE 50, U.S.C., APP. 2401 ET SEQ. VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

DISSEMINATE IN ACCORDANCE WITH THE PROVISIONS OF DOD DIRECTIVE 5230.25.

DESTRUCTIONS NOTICE:

FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS

OR RECONSTRUCTION OF THE DOCUMENT.

GOVERNMENT DOCUMENTATION SHALL BE DESTROYED UPON COMPLETION OF THE CONTRACT OR PURCHASE ORDER.

USE OF GOVERNMENT DOCUMENTATION FOR COMMERCIAL PURPOSES IS FORBIDDEN.

3RD PARTY TRANSFERS:

THIS INFORMATION IS FURNISHED UPON THE CONDITION THAT IT OR KNOWLEDGE OF ITS POSSESION WILL NOT BE RELEASED TO ANOTHER NATION WITHOUT SPECIFIC AUTHORITY FROM THE DEPARTMENT OF NAVY OF THE U.S.;

THAT IT WILL NOT BE USED FOR OTHER THAN THE PURPOSE FOR WHICH IT WAS RELEASED; THAT INDIVIDUAL OR CORPORATE RIGHTS ORIGINATING IN THE INFORMATION, WHETHER PATENTED OR NOT, WILL BE RESPECTED; AND THAT THE INFORMATION WILL BE PROVIDED IN THE SAME DEGREE OF SECURITY AFFORDED IT BY THE DEPARTMENT OF DEFENSE

OF THE U.S. REGARDLESS OF ANY MARKINGS ON THIS DOCUMENT.

AF DWG: 201825318

210316

JTL WXRL 210317

BDS WXRD 210317

DRN WXRL 210317

ARS WXRL 210316

MICHAEL D. WALLS 210317

NOTES:

1. DRAWING PREPARED IAW ASME Y14.100 INCLUDING APPENDICES B THRU E.

2. INTERPRET DIMENSIONING AND TOLERANCING IAW ASME Y14.5-2018.

3. IDENTIFY WITH PART NUMBER IAW MIL-STD-130, BAG & TAG.

4. MATERIAL: XENOY 6370. USE 100% VIRGIN MATERIAL. NO REGROUND MATERIAL ALLOWED.

5. UNLESS OTHERWISE SPECIFIED: DRAFT INCLUDED IN TOLERANCE SHOWN.

6. DIMENSIONS APPLY 24 HOURS MINIMUM AFTER MOLDING.

7. FLASH .005 INCH MAX PERMISSIBLE.

8. BREAK EDGES .005 MAX.

9. IF MOLD DESIGNATION IS DESIRED, THE DESIGNATION SHALL BE FLUSH OR BELOW SURFACE INDICATED.

10. GATE SIZE .065 DEEP AND .100 WIDE AND LOCATION, AS SHOWN ON PART, HAS BEEN FOUND TO PROVED A

SATISFACTORY GATE. GATE SHALL BE FLUSH OR BELOW GATING SURFACE.

11. PLASTIC INJECTION MOLD TOOLING FOR THE .312 X .700 OVAL CAVITY SHALL BE 125 MIN SURFACE FINISH WITH

NO DRAFT ALLOWED.

SEE NOTE 10

THREE SIDES

SEE NOTE 9

-01 ISO VIEW

SCALE: NONE

-01 ISO VIEW

SCALE: NONE

1.0742X

.878 ±.004q

O .1202X THRU

O .094 THRU

O .099 ±.0022X ` .080

SECTION A-A

.161 +.003 -.004

.213 ±.003 (M101)

.742

.100

.106

R .0146X

.700

.5372X

45° ±2°2X

B

.592

.2752X l O .001 M A B M

.189 +.003 -.004

.010 X 45v

ALL AROUND

.417 l O .010 M C B M l O .010 M C B M R .0788X

.1562X

.2752X

.2752X

.3462X

.312

O .099 ±.0022X `.080 l O .001 M C B M

C

R .050

ALL AROUND

.204 ±.003

.363 ±.003 (M102)

.3462X

2X R r .004 l .005 M C B M l .005 M C B M

A A

SEE NOTE 11

A

R1 SEE NORDEV21004R1 220307 MDWPRELIMINARY DRAWING

FOR INFORMATION ONLY

221128

R2 SEE NORDEV21004R2 22XXXX JRE

R .015

ALL AROUND