Attachement 1 FA480324QB028 Heat Treat Oven Salient Characteristics.pdf
PDF 161 KB Posted
- Attached to
- Aircraft Metals Technology Heat Treat Oven
- Solicitation number
- FA480324QB028
About this file
This document appears to be the Salient Characteristics for a heat treat oven required under Solicitation Number FA480324QB028 issued by the Department of the Air Force Air Combat Command. The key details are:
The heat treat oven must meet or exceed the following specifications: chamber size of 24" H x 24" W x 60" L with a maximum temperature of 1200°F, comply with AMS2750 and Class 5 standards, have SAT and TUS port access or built-in capability, include a Eurotherm Nanodac Paperless Recorder/Controller or equivalent, operate on 230 or 460/3/60 voltage, and include required safety equipment and features. The equipment must be UL approved and meet NFPA Codes 79 and 86. Training and installation are also required. The overall Solicitation is for the purchase and installation of the heat treat oven in accordance with these Salient Characteristics.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteris�cs, FA480324QB028
20 CONS / PKA
321 Cullen Street Atn: Lawrence Jenkins
Shaw AFB, SC 29152-2610 Phone: (803) 895-9396
E-Mail Address: lawrence.jenkins.1@us.af.mil
21 March 2024
• Must meet or exceed specs below.
• CHAMBER: 24" H x 24" W x 60" L, Recirculating Air furnace
• MAX TEMP: 1200ºF
• Must Meet AMS2750 standards.
• Must Meet or exceed Class 5 standards.
• Must have SAT and TUS port access or built in SAT, TUS reading equipment
• that is compatible with SDS 8120 datalogger.
• Must have Eurotherm Nanodac Paperless Recorder/Controller or equivalent.
• Equipment must operate on VOLTAGE: 230 or 460/3/60
• All electrical components must be UL approved and rated to meet or exceed
• NFPA Codes 79 and 86.
• Must include work piece removal (Tongs), Appropriate heat treating gloves, and
• all other applicable safety gear, Fusible disconnect switch, programable over and
• under temp alarms
• Training and installation is required.
File details come from the government source that posted it. Updated .