ATTACH_PGC_01724.pdf

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY

REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH

IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY

REQUIREMENTS FOUND ON THE WEB AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN

EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE

CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN

EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION

AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE

AMENDMENT DATE CONTROLS.

BERET, WOOL, BLACK 1593, ARMY, TYPE I, CLASS 10(UNLINED WITH

FLASH)

ADDITIONAL INFORMATION FOR A-A-55184A

PATTERN DATE (LINER): 11 FEBRUARY 2003

STANDARD SAMPLE IS AVAILABLE AND IS APPLICABLE FOR SHADE ONLY- -

- BLACK 1593

THE CONTRACTOR SHALL STAMP LEGIBLY WITH INDELIBLE INK THE LOT

NUMBER ON EACH END ITEM AND OUTER CONTAINER IN THE LOT.

LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS

A. THIS SOLICITATION/AWARD CONSISTS OF THE FOLLOWING DOCUMENTS,

EXHIBITS, AND OTHER ATTACHMENTS.

B. DLA TROOP SUPPORT CLOTHING AND TEXTILES #ADDITIONAL QUALITY

ASSURANCE REQUIREMENTS DATED August 2021, SUPERSEDES DSCP

4155.3, ADDITIONAL QUALITY ASSURANCE REQUIREMENTS, DATED

OCTOBER, 2018.

ADDITIONAL INFORMATION FOR COMMERCIAL AQL'S:

AQL'S FOR COMMERCIAL ITEM DESCRIPTIONS (CID'S):

VISUAL - GENERAL INSPECTION LEVEL II, AQL - 1.0

DIMENSIONAL - SPECIAL INSPECTION LEVEL S-2, AQL - 2.5

ACCEPTABILITY OF LOTS WILL BE DETERMINED BY THE USE

OF "SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY

ATTRIBUTES", ANSI/ASQC Z1.4

(REF. T1921)

A-A-52094B Thread, Cotton dated 01 May 2019 No Additional Information

(REF. T1481)

MIL-STD-129R w/CHANGE 2 - DEPARTMENT OF DEFENSE STANDARD

PRACTICE MILITARY MARKING FOR SHIPMENT AND STORAGE

DATED: 27 SEPTEMBER 2019

INTERIM CHANGES:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS

IN THE DLA TROOP SUPPORT CLOTHING AND TEXTILE (C&T) DIRECTORATE:

THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME

IDENTIFIES THE MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR

SHIPPING CONTAINERS OF DLA TROOP SUPPORT C&T ITEMS, REGARDLESS

OF MODE OF SHIPMENT.

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS

BEING CLOTHING, IT MAY REMAIN. NSNS SHALL BE SHOWN ON ALL

SHIPPING CONTAINERS OF C&T ITEMS, THE PACKING LIST SHALL BE

PLACED INSIDE THE LAST CONTAINER TO BE LOADED FOR EACH SHIPMENT.

THE WORDS "PACKING LIST HERE" SHALL BE STENCILED, NOT HAND

LETTERED, ON THE CONTAINER.

(REF. T0303)

MIL-STD-147E w/CHANGE 2

27 JUNE 2019

DEPARTMENT OF DEFENSE

STANDARD PRACTICE

PALLETIZED UNIT LOADS

(REF. T0306)

Preservations, packing and marking: Add "Plastic bags shall be sealed."

Packaging: Preservation: Each beret shall have a cardboard insert conforming to finished dimensions, width and length of table V. There shall be a hole through the center for removal when taking finished dimensions. Unit Packing: Each beret shall be inserted in a flat style, clear polyethylene bag measuring 12 by 11 ½ inches. The unsealed opening shall be the smaller dimension of bag. Intermediate Packs: Twelve (12) berets of one size and class only shall be packed flat in an intermediate paper board box conforming to style RSC, type CF variety SW of class, domestic, grade 125 of D-5118. Box closure shall be in accordance with method II as specified in the appendix of D- 5118. Inside dimensions of box shall be 11 ½ inches in length, 11 inches in width, and 7 ½ inches in depth. Packing: Forty-eight (48) berets of one size and class only (four intermediate packs) shall packed in snug fitting fiberboard shipping container conforming to ASTM-D-5118, Type CF, Style RSC, grade 175, Variety SW, Class Domestic. This container shall have dimensions to accommodate four intermediate packs, with length of intermediate paperboard box standing. (Method of closure shall be in accordance with ASTM-D-1974, 2A2, figure 1 or as an alternate 2B6 or 2B7, figure 3.