ATTACH B - Finish Schedule-Graphics.pdf

REPAIR INTERIOR FINISHES MARINE RECRUITERS, B3103

YTPM 25-0002

Attachment B, “Finish Schedule”

MARINES OFFICE ONLY:

A) Paint Interior office area(s): All exposed interior walls shall be patched with all necessary spackling and repair to interior gypsum wallboard prior to painting, leaving no defects. All exposed interior walls shall be finished and painted with two coats primer and two coats latex-Eg-Shel paint as referenced per Marine Corps Paint Schedule below. Paint schemes and accent wall finishes to be marked on floor plan. (Accent walls SW7586 RED; SW9177 Blue)(SW7526 Maison Blanche all other areas)(Trim and Door Frames SW7645 Thunder Gray)

MARINES CORPS PAINT SCHEDULE

Mfr: Color Name: Color #: Product: Coats: Finish: Area:

Sherwin Williams PRIMER ProMar 200

White (see Note 1) B28W02600 2 Latex:

Acrylic Primer

All Walls / All Painted Trim

Sherwin Williams

United States Marines Corps Recruiting Red

SW7586

Stolen Kiss B20R2658 2 Latex: Eg-Shel Walls

Sherwin Williams

United States Marines Corps Recruiting Blue

SW9177

Salty Dog B20T2654 2 Latex: Eg-Shel Walls

Sherwin Williams

United States Marines Corps Recruiting White

SW7526

Maison Blanche B20W12651 2 Latex: Eg-Shel Walls

Sherwin Williams

United States Marines Corps Recruiting Gray

SW7645

Thunder Gray B31T2654 2 Latex: Semi-

Gloss Trim/Door

Frames

Note 1: ProMar 200 Primer to be tinted to match the applicable wall color for all walls, and all painted trim.

Note 2: Paint schemes and accent wall finishes are marked on floor plan.

Note 3: If selected, contractor should request Sherwin Williams’ colors as “United States Marines Corps Recruiting...”

Formulas to these color names are available on Sherwin Williams’ National Accounts Database Note 4: Painter to be responsible for moving of furniture prior to painting, protecting furniture during painting and returning furniture to its original location.

B) Carpet & Cove Base

MARINE CORPS CARPET SCHEDULE

Manufacturer / Style: Shaw / U. S. Marine Corps Recruiting Standard: # 710S4 710S4 United States Marine Recruiting Standard | US Recruiting

Color (Name, Number):

Lead, 49500

Product: Carpet Tile, 26 oz, 24”x24” Installation Method: Monolithic Installation Adhesive: "LokDots" Adhesive System Cove Base 4” High Rubber (Johnsonite/Tarkett) Color #40, Black https://usrecruiting.shawcontract.com/products/united-states-marine-corps

C) Marine Corps Interior Wall Graphics: Install self-adhesive vinyl graphics, or where applicable, rough-surface applications. See instructions titled “Marine Corps Wall Graphics” below for installation guidance. New graphics to be installed per markings on Floor plans.

“MARINES” wall graphic is always placed on a large BLUE WALL. It is surface-applied, self-adhesive vinyl, color to PANTONE 451C, matte finish, a dark beige non-metallic color. Approved MARINES Wordmark Printed Vinyl: 3M 180CV3-10 opaque white vinyl, surface ink jet print to match PMS 451c (dark beige color) adjust as needed for accurate match to PMS 451. Surface laminated with 3M 8520 UV resistant matte clear overlay.

Alternate manufacturers (e.g., Arlon, Avery, GSP, OraCal, LG or other) sign vinyl materials equivalent to 3M 180 Series, rated for high bond wall application, and with minimum outdoor use 5-year warranty may be provided based on contractor recommendation. Alternate MARINES Wordmark Color Vinyl Recommendation: Arlon 2100- 3670 Beige, matt finish opaque vinyl.

The “Marines” graphic is always placed midway between head height (6’-0”) and the ceiling. It should be scaled to 80% of the length of the wall (up to 1’-8” H letters) and centered. The proportions of the provided “MARINES” artwork shall not be changed.

Note 1: Where length of walls exceeds standards referenced above, use Rule of Thumb: The letter height of the “MARINES” Wordmark should never grow so large that you can’t leave clear space above and below “MARINES” equal to the height of the letters, as measured from the work station panels to the ceiling.

Note 2: Wall-mounted fixtures such as thermostats, wall switches, light sensors, emergency lighting, etc., should be placed free and clear of all Military Service accents walls.

“EGA” wall graphic is always placed on a RED WALL. It is surface-applied, self-adhesive vinyl, color to match PMS 4505c, matte �inish, a dark yellow non-metallic color. Approved EGA Symbol Printed Vinyl:

3M 180CV3-10 opaque white vinyl surface ink jet print to match PMS 4505c (dark yellow color) adjust as needed for accurate match to PMS 4505. Surface laminated with 3M 8520 UV resistant matte clear overlay.

Alternate manufacturers (e.g., Arlon, Avery, GSP, OraCal, LG or other) sign vinyl materials equivalent to 3M 180 Series, rated for high bond wall application, and the minimum outdoor use 5-year warranty may be provided based on contractor recommendation.

Alternate EGA Symbol Color Vinyl Recommendation: Arlon 2100-3669 Olive, matt �inish opaque vinyl.

It is to be scaled as large as possible with the top of the EGA high on the wall. Generally, the bottom is no more than 3’-0” above the �loor. If placed on a large wall where no �ixtures or furniture will block it, the EGA should be made larger with the bottom closer to the �loor.