Attach 2 - QJKL 249991B Specifications.pdf

Mai nt ai n A/ C Par ki ng Apr on 249991B

SECTI ON 01 20 00

PRI CE AND PAYMENT PROCEDURES

11/ 20, CHG 2: 08/ 21

PART 1 GENERAL

1. 1 SUBMI TTALS

Gover nment appr oval i s r equi r ed f or submi t t al s wi t h a " G" or " S" c l assi f i cat i on. Submi t t al s not havi ng a " G" or " S" c l assi f i cat i on ar e f or i nf or mat i on onl y. When used, a code f ol l owi ng t he " G" c l assi f i cat i on i dent i f i es t he of f i ce t hat wi l l r evi ew t he submi t t al f or t he Gover nment .

Submi t t he f ol l owi ng i n accor dance wi t h Sect i on 01 33 00 SUBMI TTAL

PROCEDURES:

1. 2 CONTRACTOR' S I NVOI CE AND CONTRACT PERFORMANCE STATEMENT

1. 2. 1 Submi ssi on of I nvoi ces

I f DFARS Cl ause 252. 232- 7006 Wi de Ar ea Wor kFl ow Payment I nst r uct i ons i s i ncl uded i n t he Cont r act , pr ovi de t he document s l i s t ed i n above par agr aph CONTENT OF I NVOI CE i n t hei r ent i r et y as at t achment s i n Wi de Ar ea Wor k Fl ow ( WAWF) f or each i nvoi ce submi t t ed. The maxi mum si ze of each WAWF at t achment i s t wo megabyt es, but t her e ar e no l i mi t s on t he number of at t achment s. I f a document cannot be at t ached i n WAWF due t o syst em or s i ze r est r i ct i on, pr ovi de i t as i nst r uct ed by t he Cont r act i ng Of f i cer .

PART 2 PRODUCTS

Not Used

PART 3 EXECUTI ON

Not Used

- - End of Sect i on - -

SECTI ON 01 20 00 Page 1

SECTI ON 01 33 00

SUBMI TTAL PROCEDURES

08/ 18, CHG 4: 02/ 21

PART 1 GENERAL

1. 1 DEFI NI TI ONS

1. 1. 1 Submi t t al Descr i pt i ons ( SD)

Submi t t al r equi r ement s ar e speci f i ed i n t he t echni cal sect i ons. Exampl es and descr i pt i ons of submi t t al s i dent i f i ed by t he Submi t t al Descr i pt i on ( SD) number s and t i t l es f ol l ow:

SD- 01 Pr econst r uct i on Submi t t al s [ For Gover nment appr oved di v i s i on 01 pr econst r uct i on submi t t al s t hat ar e r equi r ed pr i or t o or commenci ng wi t h t he st ar t of wor k shal l be submi t t ed wi t hi n 30 cal endar days of cont r act awar d unl ess speci f i ed el sewher e i n t he speci f i cat i ons. For cont r act or appr oved di v i s i on 01 submi t t al s t hat ar e r equi r ed pr i or t o or commenci ng wi t h t he st ar t of wor k shal l be submi t t ed wi t hi n 45 cal endar days of cont r act awar d unl ess speci f i ed el sewher e i n t he speci f i cat i ons. ]

Pr econst r uct i on Submi t t al s i ncl ude schedul es and a t abul ar l i s t of l ocat i ons, f eat ur es, and ot her per t i nent i nf or mat i on r egar di ng pr oduct s, mat er i al s, equi pment , or component s t o be used i n t he wor k.

Cer t i f i cat es Of I nsur ance

Li st Of Pr oposed Subcont r act or s

Li st Of Pr oposed Pr oduct s

Submi t t al Regi st er

Wor k Pl an

SD- 03 Pr oduct Dat a

Cat al og cut s, i l l ust r at i ons, schedul es, di agr ams, per f or mance char t s, i nst r uct i ons and br ochur es i l l ust r at i ng s i ze, physi cal appear ance and ot her char act er i st i cs of mat er i al s, syst ems or equi pment f or some por t i on of t he wor k.

Sampl es of war r ant y l anguage when t he cont r act r equi r es ext ended pr oduct war r ant i es.

SD- 07 Cer t i f i cat es

St at ement s pr i nt ed on t he manuf act ur er ' s l et t er head and si gned by r esponsi bl e of f i c i al s of manuf act ur er of pr oduct , syst em or mat er i al at t est i ng t hat t he pr oduct , syst em, or mat er i al meet s speci f i cat i on r equi r ement s. Must be dat ed af t er awar d of pr oj ect cont r act and cl ear l y name t he pr oj ect .

Document r equi r ed of Cont r act or , or of a manuf act ur er , suppl i er , i nst al l er or Subcont r act or t hr ough Cont r act or . The document pur pose

SECTI ON 01 33 00 Page 1 i s t o f ur t her pr omot e t he or der l y pr ogr essi on of a por t i on of t he wor k by document i ng pr ocedur es, accept abi l i t y of met hods, or per sonnel qual i f i cat i ons.

1. 1. 2 Appr ovi ng Aut hor i t y

Of f i ce or desi gnat ed per son aut hor i zed t o appr ove t he submi t t al .

1. 1. 3 Wor k

As used i n t hi s sect i on, on- si t e and of f - s i t e const r uct i on r equi r ed by cont r act document s, i ncl udi ng l abor necessar y t o pr oduce submi t t al s, const r uct i on, mat er i al s, pr oduct s, equi pment , and syst ems i ncor por at ed or t o be i ncor por at ed i n such const r uct i on. I n except i on, excl udes wor k t o pr oduce SD- 01 submi t t al s.

1. 2 SUBMI TTALS

Gover nment appr oval i s r equi r ed f or submi t t al s wi t h a " G" or " S" c l assi f i cat i on. Submi t t al s not havi ng a " G" or “ S” c l assi f i cat i on ar e f or i nf or mat i on onl y. When used, a code f ol l owi ng t he " G" c l assi f i cat i on i dent i f i es t he of f i ce t hat wi l l r evi ew t he submi t t al f or t he Gover nment .

Submi t t he f ol l owi ng i n accor dance wi t h Sect i on 01 33 00 SUBMI TTAL

PROCEDURES:

SD- 01 Pr econst r uct i on Submi t t al s

Submi t t al Regi st er ; G

1. 3 SUBMI TTAL CLASSI FI CATI ON

1. 3. 1 Gover nment Appr oved ( G)

Wi t hi n t he t er ms of t he Cont r act Cl ause SPECI FI CATI ONS AND DRAWI NGS FOR CONSTRUCTI ON, submi t t al s ar e consi der ed t o be " shop dr awi ngs. "

1. 3. 2 For I nf or mat i on Onl y

Submi t t al s not r equi r i ng Gover nment appr oval wi l l be f or i nf or mat i on onl y. Wi t hi n t he t er ms of t he Cont r act Cl ause SPECI FI CATI ONS AND DRAWI NGS FOR CONSTRUCTI ON, t hey ar e not consi der ed t o be " shop dr awi ngs. "

1. 4 PREPARATI ON

1. 4. 1 Tr ansmi t t al For m

1. 4. 2 Submi t t al For mat

1. 4. 2. 1 For mat of SD- 01 Pr econst r uct i on Submi t t al s

When t he submi t t al i ncl udes a document t hat i s t o be used i n t he pr oj ect , or i s t o become par t of t he pr oj ect r ecor d, ot her t han as a submi t t al , do not appl y t he Cont r act or ' s appr oval st amp t o t he document i t sel f , but t o a separ at e sheet accompanyi ng t he document .

Pr ovi de dat a i n t he uni t of measur e used i n t he cont r act document s.

SECTI ON 01 33 00 Page 2

1. 4. 2. 2 For mat of SD- 03 Pr oduct Dat a

Pr esent pr oduct dat a submi t t al s f or each sect i on. I ncl ude a t abl e of cont ent s, l i s t i ng t he page and cat al og i t em number s f or pr oduct dat a.

I ndi cat e, by pr omi nent not at i on, each pr oduct t hat i s bei ng submi t t ed;

i ndi cat e t he speci f i cat i on sect i on number and par agr aph number t o whi ch i t per t ai ns.

1. 4. 2. 2. 1 Pr oduct I nf or mat i on

Suppl ement pr oduct dat a wi t h mat er i al pr epar ed f or t he pr oj ect t o sat i sf y t he submi t t al r equi r ement s wher e pr oduct dat a does not exi st . I dent i f y t hi s mat er i al as devel oped speci f i cal l y f or t he pr oj ect , wi t h i nf or mat i on and f or mat as r equi r ed f or submi ssi on of SD- 07 Cer t i f i cat es.

Pr ovi de pr oduct dat a i n uni t s used i n t he Cont r act document s. Wher e pr oduct dat a ar e i ncl uded i n pr epr i nt ed cat al ogs wi t h anot her uni t , submi t t he di mensi ons i n cont r act document uni t s, on a separ at e sheet .

1. 4. 2. 2. 2 St andar ds

Wher e equi pment or mat er i al s ar e speci f i ed t o conf or m t o i ndust r y or t echni cal - soci et y r ef er ence st andar ds of such or gani zat i ons as t he Amer i can Nat i onal St andar ds I nst i t ut e ( ANSI ) , ASTM I nt er nat i onal ( ASTM) , Nat i onal El ect r i cal Manuf act ur er ' s Associ at i on ( NEMA) , Under wr i t er s Labor at or i es ( UL) , or Associ at i on of Edi son I l l umi nat i ng Compani es ( AEI C) , submi t pr oof of such compl i ance. The l abel or l i s t i ng by t he speci f i ed or gani zat i on wi l l be accept abl e evi dence of compl i ance. I n l i eu of t he l abel or l i s t i ng, submi t a cer t i f i cat e f r om an i ndependent t est i ng or gani zat i on, compet ent t o per f or m t est i ng, and appr oved by t he Cont r act i ng Of f i cer . St at e on t he cer t i f i cat e t hat t he i t em has been t est ed i n accor dance wi t h t he speci f i ed or gani zat i on' s t est met hods and t hat t he i t em compl i es wi t h t he speci f i ed or gani zat i on' s r ef er ence st andar d.

1. 4. 2. 2. 3 Dat a Submi ssi on

Col l ect r equi r ed dat a submi t t al s f or each speci f i c mat er i al , pr oduct , uni t of wor k, or syst em i nt o a s i ngl e submi t t al t hat i s mar ked f or choi ces, opt i ons, and por t i ons appl i cabl e t o t he submi t t al . Mar k each copy of t he pr oduct dat a i dent i cal l y. Par t i al submi t t al s wi l l not be accept ed f or expedi t i on of t he const r uct i on ef f or t .

Submi t t he manuf act ur er ' s i nst r uct i ons bef or e i nst al l at i on.

1. 4. 2. 3 For mat of SD- 05 Desi gn Dat a

Pr ovi de desi gn dat a and cer t i f i cat es on 8 1/ 2 by 11 i nch paper .

1. 4. 2. 4 For mat of SD- 06 Test Repor t s

By pr omi nent not at i on, i ndi cat e each r epor t i n t he submi t t al . I ndi cat e t he speci f i cat i on number and par agr aph number t o whi ch each r epor t per t ai ns.

1. 4. 2. 5 For mat of SD- 07 Cer t i f i cat es

Pr ovi de desi gn dat a and cer t i f i cat es on 8 1/ 2 by 11 i nch paper .

SECTI ON 01 33 00 Page 3

1. 4. 2. 6 For mat of SD- 08 Manuf act ur er ' s I nst r uct i ons

Pr esent manuf act ur er ' s i nst r uct i ons submi t t al s f or each sect i on. I ncl ude t he manuf act ur er ' s name, t r ade name, pl ace of manuf act ur e, and cat al og model or number on pr oduct dat a. Al so i ncl ude appl i cabl e f eder al , mi l i t ar y, i ndust r y, and t echni cal - soci et y publ i cat i on r ef er ences. I f suppl ement al i nf or mat i on i s needed t o c l ar i f y t he manuf act ur er ' s dat a, submi t i t as speci f i ed f or SD- 07 Cer t i f i cat es.

Submi t t he manuf act ur er ' s i nst r uct i ons bef or e i nst al l at i on.

1. 4. 2. 6. 1 St andar ds

Wher e equi pment or mat er i al s ar e speci f i ed t o conf or m t o i ndust r y or t echni cal - soci et y r ef er ence st andar ds of such or gani zat i ons as t he Amer i can Nat i onal St andar ds I nst i t ut e ( ANSI ) , ASTM I nt er nat i onal ( ASTM) , Nat i onal El ect r i cal Manuf act ur er ' s Associ at i on ( NEMA) , Under wr i t er s Labor at or i es ( UL) , or Associ at i on of Edi son I l l umi nat i ng Compani es ( AEI C) , submi t pr oof of such compl i ance. The l abel or l i s t i ng by t he speci f i ed or gani zat i on wi l l be accept abl e evi dence of compl i ance. I n l i eu of t he l abel or l i s t i ng, submi t a cer t i f i cat e f r om an i ndependent t est i ng or gani zat i on, compet ent t o per f or m t est i ng, and appr oved by t he Cont r act i ng Of f i cer . St at e on t he cer t i f i cat e t hat t he i t em has been t est ed i n accor dance wi t h t he speci f i ed or gani zat i on' s t est met hods and t hat t he i t em compl i es wi t h t he speci f i ed or gani zat i on' s r ef er ence st andar d.

1. 4. 2. 7 For mat of SD- 11 Cl oseout Submi t t al s

When t he submi t t al i ncl udes a document t hat i s t o be used i n t he pr oj ect or i s t o become par t of t he pr oj ect r ecor d, ot her t han as a submi t t al , do not appl y t he Cont r act or ' s appr oval st amp t o t he document i t sel f , but t o a separ at e sheet accompanyi ng t he document .

Pr ovi de dat a i n t he uni t of measur e used i n t he cont r act document s.

1. 5 QUANTI TY OF SUBMI TTALS

1. 5. 1 Number of SD- 01 Pr econst r uct i on Submi t t al Copi es

Unl ess ot her wi se speci f i ed, submi t one set of admi ni st r at i ve submi t t al s.

1. 6 I NFORMATI ON ONLY SUBMI TTALS

Submi t t al s wi t hout a " G" desi gnat i on must be cer t i f i ed by t he QC manager and submi t t ed t o t he Cont r act i ng Of f i cer f or i nf or mat i on- onl y. Pr ovi de i nf or mat i on- onl y submi t t al s t o t he Cont r act i ng Of f i cer a mi ni mum of 14 cal endar days pr i or t o t he Pr epar at or y Meet i ng f or t he associ at ed Def i nabl e Feat ur e of Wor k ( DFOW) . Appr oval of t he Cont r act i ng Of f i cer i s not r equi r ed on i nf or mat i on onl y submi t t al s. The Cont r act i ng Of f i cer wi l l mar k " r ecei pt acknowl edged" on submi t t al s f or i nf or mat i on and wi l l r et ur n onl y t he t r ansmi t t al cover sheet t o t he Cont r act or . Nor mal l y, submi t t al s f or i nf or mat i on onl y wi l l not be r et ur ned. However , t he Gover nment r eser ves t he r i ght t o r et ur n unsat i sf act or y submi t t al s and r equi r e t he Cont r act or t o r esubmi t any i t em f ound not t o compl y wi t h t he cont r act .

Thi s does not r el i eve t he Cont r act or f r om t he obl i gat i on t o f ur ni sh mat er i al conf or mi ng t o t he pl ans and speci f i cat i ons; wi l l not pr event t he Cont r act i ng Of f i cer f r om r equi r i ng r emoval and r epl acement of

SECTI ON 01 33 00 Page 4 nonconf or mi ng mat er i al i ncor por at ed i n t he wor k; and does not r el i eve t he Cont r act or of t he r equi r ement t o f ur ni sh sampl es f or t est i ng by t he Gover nment l abor at or y or f or check t est i ng by t he Gover nment i n t hose i nst ances wher e t he t echni cal speci f i cat i ons so pr escr i be.

1. 7 PROJECT SUBMI TTAL REGI STER

A sampl e Pr oj ect Submi t t al Regi st er showi ng i t ems of equi pment and mat er i al s f or when submi t t al s ar e r equi r ed by t he speci f i cat i ons i s pr ovi ded as " Appendi x A - Submi t t al Regi st er . "

1. 7. 1 Submi t t al Management

Pr epar e and mai nt ai n a submi t t al r egi st er , as t he wor k pr ogr esses. Do not change dat a t hat i s out put i n col umns ( c) , ( d) , ( e) , and ( f ) as del i ver ed by Gover nment ; r et ai n dat a t hat i s out put i n col umns ( a) , ( g) , ( h) , and ( i ) as appr oved. As an at t achment , pr ovi de a submi t t al r egi st er showi ng i t ems of equi pment and mat er i al s f or whi ch submi t t al s ar e r equi r ed by t he speci f i cat i ons. Thi s l i s t may not be al l - i ncl usi ve and addi t i onal submi t t al s may be r equi r ed.

Col umn ( c) : Li st s speci f i cat i on sect i on i n whi ch submi t t al i s r equi r ed.

Col umn ( d) : Li st s each submi t t al descr i pt i on ( SD Number . and t ype, e. g. , SD- 02 Shop Dr awi ngs) r equi r ed i n each speci f i cat i on sect i on.

Col umn ( e) : Li st s one pr i nci pal par agr aph i n each speci f i cat i on sect i on wher e a mat er i al or pr oduct i s speci f i ed. Thi s l i s t i ng i s onl y t o f aci l i t at e l ocat i ng submi t t ed r equi r ement s. Do not consi der ent r i es i n col umn ( e) as l i mi t i ng t he pr oj ect r equi r ement s.

Ther eaf t er , t he Cont r act or i s t o t r ack al l submi t t al s by mai nt ai ni ng a compl et e l i s t , i ncl udi ng compl et i on of al l dat a col umns and al l dat es on whi ch submi t t al s ar e r ecei ved by and r et ur ned by t he Gover nment .

1. 7. 2 Pr econst r uct i on Use of Submi t t al Regi st er

Submi t t he submi t t al r egi st er . I ncl ude t he QC pl an and t he pr oj ect schedul e. Ver i f y t hat al l submi t t al s r equi r ed f or t he pr oj ect ar e l i s t ed and add mi ssi ng submi t t al s. Coor di nat e and compl et e t he f ol l owi ng f i el ds on t he r egi st er submi t t ed wi t h t he QC pl an and t he pr oj ect schedul e:

Col umn ( a) Act i v i t y Number : Act i v i t y number f r om t he pr oj ect schedul e.

Col umn ( g) Cont r act or Submi t Dat e: Schedul ed dat e f or t he appr ovi ng aut hor i t y t o r ecei ve submi t t al s.

Col umn ( h) Cont r act or Appr oval Dat e: Dat e t hat Cont r act or needs appr oval of submi t t al .

Col umn ( i ) Cont r act or Mat er i al : Dat e t hat Cont r act or needs mat er i al del i ver ed t o Cont r act or cont r ol .

SECTI ON 01 33 00 Page 5

1. 7. 3 Cont r act or Use of Submi t t al Regi st er

Updat e t he f ol l owi ng f i el ds wi t h each submi t t al t hr oughout t he cont r act .

Col umn ( b) Tr ansmi t t al Number : Li st of consecut i ve, Cont r act or - assi gned number s.

Col umn ( j ) Act i on Code ( k) : Dat e of act i on used t o r ecor d Cont r act or ' s r evi ew when f or war di ng submi t t al s t o QC.

Col umn ( l ) Dat e submi t t al t r ansmi t t ed.

Col umn ( q) Dat e appr oval was r ecei ved.

1. 7. 4 Appr ovi ng Aut hor i t y Use of Submi t t al Regi st er

Updat e t he f ol l owi ng f i el ds:

Col umn ( b) Tr ansmi t t al Number : Li st of consecut i ve, Cont r act or - assi gned number s.

Col umn ( l ) Dat e submi t t al was r ecei ved.

Col umn ( m) t hr ough ( p) Dat es of r evi ew act i ons.

Col umn ( q) Dat e of r et ur n t o Cont r act or .

1. 7. 5 Del i ver y of Copi es

Submi t an updat ed el ect r oni c copy of t he submi t t al r egi st er t o t he Cont r act i ng Of f i cer wi t h each i nvoi ce r equest . Pr ovi de an updat ed Submi t t al Regi st er mont hl y r egar dl ess of whet her an i nvoi ce i s submi t t ed.

1. 8 VARI ATI ONS

Var i at i ons f r om cont r act r equi r ement s r equi r e Cont r act i ng Of f i cer appr oval pur suant t o cont r act Cl ause FAR 52. 236- 21 Speci f i cat i ons and Dr awi ngs f or Const r uct i on, and wi l l be consi der ed wher e advant ageous t o t he Gover nment .

1. 8. 1 Consi der i ng Var i at i ons

Di scussi on of var i at i ons wi t h t he Cont r act i ng Of f i cer bef or e submi ssi on of a var i at i on submi t t al wi l l hel p ensur e t hat f unct i onal and qual i t y r equi r ement s ar e met and mi ni mi ze r ej ect i ons and r esubmi t t al s. For var i at i ons t hat i ncl ude desi gn changes or some mat er i al or pr oduct subst i t ut i ons, t he Gover nment may r equi r e an eval uat i on and anal ysi s by a l i censed pr of essi onal engi neer hi r ed by t he cont r act or .

Speci f i cal l y poi nt out var i at i ons f r om cont r act r equi r ement s i n a t r ansmi t t al l et t er . Fai l ur e t o poi nt out var i at i ons may cause t he Gover nment t o r equi r e r ej ect i on and r emoval of such wor k at no addi t i onal cost t o t he Gover nment .

1. 8. 2 Pr oposi ng Var i at i ons

When pr oposi ng var i at i on, del i ver a submi t t al , c l ear l y mar ked as a " VARI ATI ON" t o t he Cont r act i ng Of f i cer , wi t h document at i on i l l ust r at i ng t he nat ur e and f eat ur es of t he var i at i on i ncl udi ng any necessar y t echni cal submi t t al s and why t he var i at i on i s desi r abl e and benef i c i al t o

SECTI ON 01 33 00 Page 6

Gover nment . I f l ower cost i s a benef i t , al so i ncl ude an est i mat e of t he cost savi ngs. I n addi t i on t o document at i on r equi r ed f or var i at i on, i ncl ude t he submi t t al s r equi r ed f or t he i t em. Cl ear l y mar k t he pr oposed var i at i on i n al l document at i on.

Speci f i cal l y poi nt out var i at i ons f r om cont r act r equi r ement s i n a t r ansmi t t al l et t er . Fai l ur e t o poi nt out var i at i ons may cause t he Gover nment t o r equi r e r ej ect i on and r emoval of such wor k at no addi t i onal cost t o t he Gover nment .

1. 8. 3 War r ant i ng t hat Var i at i ons ar e Compat i bl e

When del i ver i ng a var i at i on f or appr oval , t he Cont r act or war r ant s t hat t hi s cont r act has been r evi ewed t o est abl i sh t hat t he var i at i on, i f i ncor por at ed, wi l l be compat i bl e wi t h ot her el ement s of wor k.

1. 8. 4 Revi ew Schedul e Ext ensi on

I n addi t i on t o t he nor mal submi t t al r evi ew per i od, a per i od of 14 days wi l l be al l owed f or t he Gover nment t o consi der submi t t al s wi t h var i at i ons.

1. 9 SCHEDULI NG

Schedul e and submi t concur r ent l y pr oduct dat a and shop dr awi ngs cover i ng component i t ems f or mi ng a syst em or i t ems t hat ar e i nt er r el at ed. Submi t per t i nent cer t i f i cat i ons at t he same t i me. No del ay damages or t i me ext ensi ons wi l l be al l owed f or t i me l ost i n l at e submi t t al s. .

a. Coor di nat e schedul i ng, sequenci ng, pr epar i ng, and pr ocessi ng of submi t t al s wi t h per f or mance of wor k so t hat wor k wi l l not be del ayed by submi t t al pr ocessi ng. The Cont r act or i s r esponsi bl e f or addi t i onal t i me r equi r ed f or Gover nment r evi ews r esul t i ng f r om r equi r ed r esubmi t t al s. The r evi ew per i od f or each r esubmi t t al i s t he same as f or t he i ni t i al submi t t al .

b. Submi t t al s r equi r ed by t he cont r act document s ar e l i s t ed on t he submi t t al r egi st er . I f a submi t t al i s l i s t ed i n t he submi t t al r egi st er but does not per t ai n t o t he cont r act wor k, t he Cont r act or i s t o i ncl ude t he submi t t al i n t he r egi st er and annot at e i t " N/ A" wi t h a br i ef expl anat i on. Appr oval by t he Cont r act i ng Of f i cer does not r el i eve t he Cont r act or of suppl y i ng submi t t al s r equi r ed by t he cont r act document s but t hat have been omi t t ed f r om t he r egi st er or mar ked " N/ A. "

c. Resubmi t t he submi t t al r egi st er and annot at e i t mont hl y wi t h act ual submi ssi on and appr oval dat es. When al l i t ems on t he r egi st er have been f ul l y appr oved, no f ur t her r esubmi t t al i s r equi r ed.

Cont r act i ng Of f i cer r evi ew wi l l be compl et ed wi t hi n 14 days af t er t he dat e of submi ssi on.

1. 10 GOVERNMENT APPROVI NG AUTHORI TY

When t he appr ovi ng aut hor i t y i s t he Cont r act i ng Of f i cer , t he Gover nment wi l l :

a. Not e t he dat e on whi ch t he submi t t al was r ecei ved.

b. Revi ew submi t t al s f or appr oval wi t hi n t he schedul i ng per i od speci f i ed and onl y f or conf or mance wi t h pr oj ect desi gn concept s and compl i ance

SECTI ON 01 33 00 Page 7 wi t h cont r act document s.

c. I dent i f y r et ur ned submi t t al s wi t h one of t he act i ons def i ned i n par agr aph REVI EW NOTATI ONS and wi t h comment s and mar ki ngs appr opr i at e f or t he act i on i ndi cat ed.

Upon compl et i on of r evi ew of submi t t al s r equi r i ng Gover nment appr oval , st amp and dat e submi t t al s. one copi es of t he submi t t al wi l l be r et ai ned by t he Cont r act i ng Of f i cer and one copi es of t he submi t t al wi l l be r et ur ned t o t he Cont r act or .

1. 10. 1 Revi ew Not at i ons

Submi t t al s wi l l be r et ur ned t o t he Cont r act or wi t h t he f ol l owi ng not at i ons:

a. Submi t t al s mar ked " appr oved" or " accept ed" aut hor i ze pr oceedi ng wi t h t he wor k cover ed.

b. Submi t t al s mar ked " appr oved as not ed" or " appr oved, except as not ed, r esubmi t t al not r equi r ed, " aut hor i ze pr oceedi ng wi t h t he wor k cover ed pr ovi ded t hat t he Cont r act or t akes no except i on t o t he cor r ect i ons.

c. Submi t t al s mar ked " not appr oved, " " di sappr oved, " or " r evi se and r esubmi t " i ndi cat e i ncompl et e submi t t al or noncompl i ance wi t h t he cont r act r equi r ement s or desi gn concept . Resubmi t wi t h appr opr i at e changes. Do not pr oceed wi t h wor k f or t hi s i t em unt i l t he r esubmi t t al i s appr oved.

d. Submi t t al s mar ked " not r evi ewed" i ndi cat e t hat t he submi t t al has been pr evi ousl y r evi ewed and appr oved, i s not r equi r ed, does not have evi dence of bei ng r evi ewed and appr oved by Cont r act or , or i s not compl et e. A submi t t al mar ked " not r evi ewed" wi l l be r et ur ned wi t h an expl anat i on of t he r eason i t i s not r evi ewed. Resubmi t submi t t al s r et ur ned f or l ack of r evi ew by Cont r act or or f or bei ng i ncompl et e, wi t h appr opr i at e act i on, coor di nat i on, or change.

e. Submi t t al s mar ked " r ecei pt acknowl edged" i ndi cat e t hat submi t t al s have been r ecei ved by t he Gover nment . Thi s appl i es onl y t o " i nf or mat i on- onl y submi t t al s" as pr evi ousl y def i ned.

1. 11 DI SAPPROVED SUBMI TTALS

Make cor r ect i ons r equi r ed by t he Cont r act i ng Of f i cer . I f t he Cont r act or consi der s any cor r ect i on or not at i on on t he r et ur ned submi t t al s t o const i t ut e a change t o t he cont r act dr awi ngs or speci f i cat i ons, gi ve not i ce t o t he Cont r act i ng Of f i cer as r equi r ed under t he FAR cl ause t i t l ed CHANGES. The Cont r act or i s r esponsi bl e f or t he di mensi ons and desi gn of connect i on det ai l s and t he const r uct i on of wor k. Fai l ur e t o poi nt out var i at i ons may cause t he Gover nment t o r equi r e r ej ect i on and r emoval of such wor k at t he Cont r act or ' s expense.

I f changes ar e necessar y t o submi t t al s, make such r evi s i ons and r esubmi t i n accor dance wi t h t he pr ocedur es above. No i t em of wor k r equi r i ng a submi t t al change i s t o be accompl i shed unt i l t he changed submi t t al s ar e appr oved.

1. 12 APPROVED SUBMI TTALS

The Cont r act i ng Of f i cer ' s appr oval of submi t t al s i s not t o be const r ued as

SECTI ON 01 33 00 Page 8 a compl et e check, and i ndi cat es onl y t hat

Appr oval or accept ance by t he Gover nment f or a submi t t al does not r el i eve t he Cont r act or of t he r esponsi bi l i t y f or meet i ng t he cont r act r equi r ement s or f or any er r or t hat may exi st , because under t he Qual i t y Cont r ol ( QC) r equi r ement s of t hi s cont r act , t he Cont r act or i s r esponsi bl e f or ensur i ng i nf or mat i on cont ai ned wi t h i n each submi t t al accur at el y conf or ms wi t h t he r equi r ement s of t he cont r act document s.

Af t er submi t t al s have been appr oved or accept ed by t he Cont r act i ng Of f i cer , no r esubmi t t al f or t he pur pose of subst i t ut i ng mat er i al s or equi pment wi l l be consi der ed unl ess accompani ed by an expl anat i on of why a subst i t ut i on i s necessar y.

1. 13 APPROVED SAMPLES

Appr oval of a sampl e i s onl y f or t he char act er i st i cs or use named i n such appr oval and i s not be const r ued t o change or modi f y any cont r act r equi r ement s. Bef or e submi t t i ng sampl es, pr ovi de assur ance t hat t he mat er i al s or equi pment wi l l be avai l abl e i n quant i t i es r equi r ed i n t he pr oj ect . No change or subst i t ut i on wi l l be per mi t t ed af t er a sampl e has been appr oved.

Mat ch t he appr oved sampl es f or mat er i al s and equi pment i ncor por at ed i n t he wor k. I f r equest ed, appr oved sampl es, i ncl udi ng t hose t hat may be damaged i n t est i ng, wi l l be r et ur ned t o t he Cont r act or , at i t s expense, upon compl et i on of t he cont r act . Unappr oved sampl es wi l l al so be r et ur ned t o t he Cont r act or at i t s expense, i f so r equest ed.

Fai l ur e of any mat er i al s t o pass t he speci f i ed t est s wi l l be suf f i c i ent cause f or r ef usal t o consi der , under t hi s cont r act , any f ur t her sampl es of t he same br and or make as t hat mat er i al . The Gover nment r eser ves t he r i ght t o di sappr ove any mat er i al or equi pment t hat has pr evi ousl y pr oved unsat i sf act or y i n ser vi ce.

Sampl es of var i ous mat er i al s or equi pment del i ver ed on t he si t e or i n pl ace may be t aken by t he Cont r act i ng Of f i cer f or t est i ng. Sampl es f ai l i ng t o meet cont r act r equi r ement s wi l l aut omat i cal l y voi d pr evi ous appr oval s. Repl ace such mat er i al s or equi pment t o meet cont r act r equi r ement s.

PART 2 PRODUCTS

Not Used

PART 3 EXECUTI ON

Not Used

SECTI ON 01 33 00 Page 9

Maintain A/C Parking Apron 249991B

SECTION 01 50 00

TEMPORARY CONSTRUCTION FACILITIES AND CONTROLS

11/20, CHG 2: 08/22

PART 1 GENERAL

1.1 SUBMITTALS

Government approval is required for submittals with a "G" or "S" classification. Submittals not having a "G" or "S" classification are for information only. When used, a code following the "G" classification identifies the office that will review the submittal for the Government.

Submit the following in accordance with Section 01 33 00 SUBMITTAL

PROCEDURES:

PART 2 PRODUCTS

2.1 FENCING

2.1.1 Polyethylene Mesh Safety Fencing

Temporary safety fencing must be a high visibility orange colored, high density polyethylene grid, a minimum of 48 inches high and maximum mesh size of 2 inches . Fencing must extend from the grade to a minimum of 48 inches above the grade and be tightly secured to T-posts spaced as necessary to maintain a rigid and taut fence. Fencing must remain rigid and taut throughout the construction period. Secondary intent of the safety fencing is to act as a containment barrier to prevent backer rod and joint sealant from escaping the work area. It is the responsib ility of the contractor to keep construction debris inside the work area.

PART 3 EXECUTION

3.1 EMPLOYEE PARKING

Construction Contract employees must park privately owned vehicles in an area designated by the Contracting Officer. Employee parking must not interfere with existing and established parking requirements of the Government installation.

3.2 TEMPORARY PROJECT SAFETY FENCING

As soon as practicable, but not later than 15 days after the date established for commencement of work, furnish and erect temporary project safety fencing at the work site. Maintain the safety fencing during the life of the Contract and, upon completion and acceptance of the work, remove from the work site.

3.3 CLEANUP

Remove construction debris, waste materials, packaging material and the like from the work site daily. Any dirt or mud which is tracked onto paved or surfaced roadways must be cleaned away. Store all salvageable materials resulting from demolition activities within the fenced area described above or at the supplemental storage area. Neatly stack stored materials not in trailers, whether new or salvaged.

SECTION 01 50 00 Page 1

3. 4 RESTORATI ON OF STORAGE AREA

Upon compl et i on of t he pr oj ect r emove t he bul l et i n boar d, s i gns, bar r i cades, haul r oads, and al l ot her t empor ar y pr oduct s f r om t he si t e.

Af t er r emoval of t r ai l er s, mat er i al s, and equi pment f r om wi t hi n t he f enced ar ea, r emove t he f ence. Rest or e ar eas used dur i ng t he per f or mance of t he Cont r act t o t he or i gi nal or bet t er condi t i on. Remove gr avel used t o t r aver se gr assed ar eas and r est or e t he ar ea t o i t s or i gi nal condi t i on, i ncl udi ng t op soi l and seedi ng as necessar y.

SECTI ON 01 50 00 Page 2

SECTI ON 01 78 00

CLOSEOUT SUBMI TTALS

05/ 19, CHG 1: 08/ 21

PART 1 GENERAL

1. 1 DEFI NI TI ONS

1. 1. 1 As- Bui l t Dr awi ngs

As- bui l t dr awi ngs ar e t he mar ked- up dr awi ngs, mai nt ai ned by t he Cont r act or on- si t e, t hat depi ct act ual condi t i ons and devi at i ons f r om t he Cont r act Document s. These devi at i ons and addi t i ons may r esul t f r om coor di nat i on r equi r ed by, but not l i mi t ed t o: cont r act modi f i cat i ons; of f i c i al r esponses t o submi t t ed Request s f or I nf or mat i on ( RFI ' s) ; di r ect i on f r om t he Cont r act i ng Of f i cer ; desi gn t hat i s t he r esponsi bi l i t y of t he Cont r act or , and di f f er i ng s i t e condi t i ons. Mai nt ai n t he as- bui l t s t hr oughout const r uct i on as r ed- l i ned har d copi es on si t e. These f i l es ser ve as t he basi s f or t he cr eat i on of t he r ecor d dr awi ngs.

1. 2 SUBMI TTALS

Gover nment appr oval i s r equi r ed f or submi t t al s wi t h a " G" or " S" c l assi f i cat i on. Submi t t al s not havi ng a " G" or " S" c l assi f i cat i on ar e f or i nf or mat i on onl y. When used, a code f ol l owi ng t he " G" c l assi f i cat i on i dent i f i es t he of f i ce t hat wi l l r evi ew t he submi t t al f or t he Gover nment .

Submi t t he f ol l owi ng i n accor dance wi t h Sect i on 01 33 00 SUBMI TTAL

PROCEDURES:

SD- 11 Cl oseout Submi t t al s

As- Bui l t Dr awi ngs; G

1. 3 WARRANTY MANAGEMENT

1. 3. 1 Per f or mance Bond

The Per f or mance Bond must r emai n ef f ect i ve t hr oughout t he const r uct i on and war r ant y per i od .

a. I n t he event t he Cont r act or f ai l s t o commence and di l i gent l y pur sue any const r uct i on war r ant y wor k r equi r ed, t he Cont r act i ng Of f i cer wi l l have t he wor k per f or med by ot her s, and af t er compl et i on of t he wor k, wi l l char ge t he r emai ni ng const r uct i on war r ant y f unds of expenses i ncur r ed by t he Gover nment whi l e per f or mi ng t he wor k, i ncl udi ng, but not l i mi t ed t o admi ni st r at i ve expenses.

b. I n t he event suf f i c i ent f unds ar e not avai l abl e t o cover t he const r uct i on war r ant y wor k per f or med by t he Gover nment at t he Cont r act or ' s expense, t he Cont r act i ng Of f i cer wi l l have t he r i ght t o r ecoup expenses f r om t he bondi ng company.

c. Fol l owi ng or al or wr i t t en not i f i cat i on of r equi r ed const r uct i on war r ant y r epai r wor k, r espond i n a t i mel y manner . Wr i t t en ver i f i cat i on wi l l f ol l ow or al i nst r uct i ons. Fai l ur e t o r espond wi l l be cause f or t he Cont r act i ng Of f i cer t o pr oceed agai nst t he Cont r act or .

SECTI ON 01 78 00 Page 1

PART 2 PRODUCTS

PART 3 EXECUTI ON

3. 1 AS- BUI LT DRAWI NGS

Pr ovi de and mai nt ai n t wo bl ack l i ne pr i nt copi es of t he PDF cont r act dr awi ngs f or As- Bui l t Dr awi ngs. Mai nt ai n t he as- bui l t s t hr oughout const r uct i on as r ed- l i ned har d copi es on si t e and r ed- l i ned PDF f i l es.

Submi t As- Bui l t Dr awi ngs 30 days af t er Benef i c i al Occupancy Dat e ( BOD) .

3. 1. 1 Mar kup Gui del i nes

Make comment s and mar kup t he dr awi ngs compl et e wi t hout r ef er ence t o l et t er s, memos, or mat er i al s t hat ar e not par t of t he As- Bui l t dr awi ng.

Show what was changed, how i t was changed, wher e i t em( s) wer e r el ocat ed and change r el at ed det ai l s. These wor ki ng as- bui l t mar kup pr i nt s must be neat , l egi bl e and accur at e as f ol l ows:

a. Use base col or s of r ed, gr een, and bl ue. Col or code f or changes as f ol l ows:

( 1) Speci al ( Bl ue) - I t ems r equi r i ng speci al i nf or mat i on, coor di nat i on, or speci al det ai l i ng or det ai l i ng not es.

( 2) Del et i ons ( Red) - Over - st r i ke del et ed gr aphi c i t ems ( l i nes) , l et t er i ng i n not es and l eader s.

( 3) Addi t i ons ( Gr een) - Added i t ems, l et t er i ng i n not es and l eader s.

b. Pr ovi de a l egend i f col or s ot her t han t he " base" col or s of r ed, gr een, and bl ue ar e used.

c. Add and denot e any addi t i onal equi pment or mat er i al f aci l i t i es, ser vi ce l i nes, i ncor por at ed under As- Bui l t Revi s i ons i f not al r eady shown i n l egend.

d. Use f r equent wr i t t en expl anat i ons on mar kup dr awi ngs t o descr i be changes. Do not t ot al l y r el y on gr aphi c means t o convey t he r evi s i on.

e. Use l egi bl e l et t er i ng and pr eci se and cl ear di gi t al val ues when mar ki ng pr i nt s. Cl ar i f y ambi gui t i es concer ni ng t he nat ur e and appl i cat i on of change i nvol ved.

f . Wher ever a r evi s i on i s made, al so make changes t o r el at ed sect i on v i ews, det ai l s, l egend, pr of i l es, pl ans and el evat i on v i ews, schedul es, not es and cal l out desi gnat i ons, and mar k accor di ngl y t o avoi d conf l i c t i ng dat a on al l ot her sheet s.

g. For del et i ons, cr oss out al l f eat ur es, dat a and capt i ons t hat r el at e t o t hat r evi s i on.

h. For changes on smal l - scal e dr awi ngs and i n r est r i ct ed ar eas, pr ovi de l ar ge- scal e i nser t s, wi t h l eader s t o t he appl i cabl e l ocat i on.

i . I ndi cat e one of t he f ol l owi ng when at t achi ng a pr i nt or sket ch t o a mar kup pr i nt :

1) Add an ent i r e dr awi ng t o cont r act dr awi ngs

SECTI ON 01 78 00 Page 2

2) Change t he cont r act dr awi ng t o show changes on t he dr awi ng.

3) Pr ovi ded f or r ef er ence onl y t o f ur t her det ai l t he i ni t i al desi gn.

j . I ncor por at e al l shop and f abr i cat i on dr awi ngs i nt o t he mar kup dr awi ngs.

3. 2 CLEANUP

Leave pr emi ses " br oom cl ean. " Cl ean i nt er i or and ext er i or gl ass sur f aces exposed t o v i ew; r emove t empor ar y l abel s, st ai ns and f or ei gn subst ances;

pol i sh t r anspar ent and gl ossy sur f aces; vacuum car pet ed and sof t sur f aces. Cl ean equi pment and f i xt ur es t o a sani t ar y condi t i on. Remove wast e and sur pl us mat er i al s, r ubbi sh and const r uct i on f aci l i t i es f r om t he si t e. .

SECTI ON 01 78 00 Page 3

SECTI ON 32 01 17. 61

SEALI NG CRACKS I N ASPHALT PAVI NG

05/ 22

PART 1 GENERAL

1. 1 UNI T PRI CES

1. 1. 1 Measur ement

Det er mi ne t he quant i t y of each seal i ng i t em t o be pai d f or by act ual measur ement of t he number of l i near f eet of appr oved i n- pl ace mat er i al .

1. 1. 2 Payment

Payment wi l l be made at t he cont r act uni t bi d pr i ces per l i near f oot f or t he seal i ng i t ems schedul ed. I ncl ude i n t he uni t bi d pr i ces t he cost of al l l abor , mat er i al s, and t he use of al l equi pment and t ool s r equi r ed t o compl et e t he wor k.

1. 2 REFERENCES

The publ i cat i ons l i s t ed bel ow f or m a par t of t hi s speci f i cat i on t o t he ext ent r ef er enced. The publ i cat i ons ar e r ef er r ed t o wi t hi n t he t ext by t he basi c desi gnat i on onl y.

ASTM I NTERNATI ONAL ( ASTM)

ASTM C509 ( 2006; R 2021) St andar d Speci f i act i on f or El ast omer i c Cel l ul ar Pr ef or med Gasket and Seal i ng Mat er i al

ASTM D789 ( 2015) Det er mi nat i on of Rel at i ve Vi scosi t y and Moi st ur e Cont ent of Pol yami de ( PA)

ASTM D6690 ( 2015) St andar d Speci f i cat i on f or Joi nt and Cr ack Seal ant s, Hot Appl i ed, f or Concr et e and Asphal t Pavement s

1. 3 SUBMI TTALS

Gover nment appr oval i s r equi r ed f or submi t t al s wi t h a " G" or " S" c l assi f i cat i on. Submi t t al s not havi ng a " G" or " S" c l assi f i cat i on ar e f or i nf or mat i on onl y. When used, a code f ol l owi ng t he " G" c l assi f i cat i on i dent i f i es t he of f i ce t hat wi l l r evi ew t he submi t t al f or t he Gover nment .

Submi t t he f ol l owi ng i n accor dance wi t h Sect i on 01 33 00 SUBMI TTAL

PROCEDURES:

SD- 01 Pr econst r uct i on Submi t t al s

Equi pment , Tool s, And Machi nes; G

SD- 03 Pr oduct Dat a

Manuf act ur er ' s I nst r uct i ons; G

Cr ack Seal ant ; G

SECTI ON 32 01 17. 61 Page 1

Backer Rod; G

1. 4 QUALI TY ASSURANCE

Test t he cr ack seal ant and backup mat er i al s f or conf or mance wi t h t he r ef er enced appl i cabl e mat er i al speci f i cat i on. Per f or m t est i ng of t he mat er i al s i n an appr oved, i ndependent l abor at or y; submi t cer t i f i ed copi es of t he t est r epor t s f or appr oval 30 days pr i or t o t he use of t he mat er i al s at t he j ob s i t e. Submi t r epor t s of al l t est s. Sampl es wi l l be r et ai ned by t he Gover nment f or possi bl e f ut ur e t est i ng, i f t he mat er i al s appear def ect i ve dur i ng or af t er appl i cat i on. Fur ni sh sampl es of mat er i al s, i n suf f i c i ent quant i t y t o be t est ed by t he Gover nment upon r equest .

Conf or mance wi t h t he t est r equi r ement s of t he l abor at or y t est s speci f i ed wi l l not const i t ut e f i nal accept ance of t he mat er i al s. Fi nal accept ance wi l l be based on t he per f or mance of mat er i al s t hat have been sat i sf act or i l y i nst al l ed.

1. 5 DELI VERY, STORAGE, AND HANDLI NG

I nspect mat er i al s del i ver ed t o t he j ob s i t e f or def ect s; unl oad, and st or e t hem wi t h a mi ni mum of handl i ng t o avoi d damage. Pr ovi de st or age f aci l i t i es at t he j ob s i t e t o pr ot ect mat er i al s f r om weat her and mai nt ai n t hem at t he t emper at ur es r ecommended by t he manuf act ur er .

1. 6 ENVI RONMENTAL REQUI REMENTS

Appl y t he mat er i al s onl y when t he ambi ent ai r t emper at ur e and t he pavement t emper at ur e wi t hi n t he j oi nt wal l ar e at l east 40 degr ees F and r i s i ng.

Do not appl y seal ant i f moi st ur e i s obser ved i n t he cr ack.

1. 7 ACCEPTANCE

1. 7. 1 Cr ack Seal ant

I nspect t he cr ack seal ant f or pr oper cur e and r at e of set , t ack f r ee sur f ace, bondi ng t o t he bi t umi nous pavement , cohesi ve separ at i on wi t hi n t he seal ant , r ever si on t o l i qui d, and ent r apped ai r and voi ds. Remove seal ant s exhi bi t i ng any of t hese def i c i enci es, at any t i me pr i or t o t he f i nal accept ance of t he pr oj ect , and r epl ace as speci f i ed her ei n.

1. 7. 2 Test Sect i on

Pr i or t o t he c l eani ng and seal i ng of t he cr acks f or t he ent i r e pr oj ect , const r uct a t est sect i on at l east 40 f eet l ong usi ng t he speci f i ed mat er i al s and appr oved equi pment t o demonst r at e t he pr oposed pr epar at i on and seal i ng of al l cr acks of t he pr oj ect . Fol l owi ng t he compl et i on of t he t est sect i on and bef or e any ot her cr ack i s seal ed, i nspect t he t est sect i on t o det er mi ne t hat t he mat er i al s and i nst al l at i on meet t he r equi r ement s speci f i ed. I f mat er i al s or i nst al l at i on do not meet r equi r ement s, r emove t he mat er i al s and r ecl ean and r eseal t he cr acks.

PART 2 PRODUCTS

2. 1 SEALANTS

Pr ovi de cr ack seal ant conf or mi ng t o ASTM D6690, Type as sui t abl e over t he Per f or mance Gr ade meet i ng r equi r ement s of MNDOT f or r oadways.

SECTI ON 32 01 17. 61 Page 2

2. 2 BACKER ROD MATERI ALS

Pr ovi de backer r od mat er i al t hat i s a compr essi bl e, nonshr i nki ng, nonst ai ni ng, nonabsor pt i ve mat er i al and nonr eact i ve wi t h t he cr ack seal ant . Use backer r od wi t h a mel t i ng poi nt t emper at ur e of at l east 5 degr ees F gr eat er t han t he maxi mum pour i ng t emper at ur e of t he seal ant bei ng used, when t est ed i n accor dance wi t h ASTM D789. Use mat er i al t hat has a wat er absor pt i on of not mor e t han 5 per cent by wei ght when t est ed i n accor dance wi t h ASTM C509. Use backer r od mat er i al t hat i s 25 per cent ( pl us or mi nus 5 per cent ) l ar ger i n di amet er t han t he nomi nal wi dt h of t he cr ack.

2. 3 EQUI PMENT, TOOLS, AND MACHI NES

Equi pment , t ool s, and machi nes used i n per f or mance of t he wor k ar e subj ect t o appr oval by t he Gover nment . Mai nt ai n i n a sat i sf act or y wor ki ng condi t i on at al l t i mes.

2. 3. 1 Rout i ng Equi pment

Pr ovi de r out i ng equi pment whi ch i s a sel f - power ed machi ne oper at i ng a power dr i ven t ool or bi t speci f i cal l y desi gned f or r out i ng bi t umi nous pavement s. Use a bi t r ot at i ng about a ver t i cal axi s at suf f i c i ent speed t o cut a smoot h ver t i cal - wal l ed r eser voi r i n t he pavement sur f ace and mai nt ai n accur at e cut t i ng wi t hout damagi ng t he si des or t op edges of t he r eser voi r . Pr ovi de a r out er capabl e of f ol l owi ng t he t r ace of t he cr ack wi t hout devi at i on. The use of r ot ar y i mpact r out i ng devi ces can be per mi t t ed i f ver t i cal - s i ded car bi de t i pped bi t s ar e used.

2. 3. 2 Ai r Compr essor

Pr ovi de ai r compr essor capabl e of f ur ni shi ng not l ess t han 150 cubi c f eet per mi nut e and mai nt ai ni ng a l i ne pr essur e of not l ess t han 90 psi at t he nozzl e. Equi p t he compr essor wi t h f i l t er s t hat mai nt ai n t he compr essed ai r f r ee of oi l and wat er .

2. 3. 3 Heat Lance

Pr ovi de a heat l ance oper at i ng wi t h pr opane and compr essed ai r i n combi nat i on t o pr ovi de f l ame- f r ee hi gh t emper at ur e hot ai r up t o 3000 degr ees F wi t h exi t vel oci t i es of 3000 f eet per second.

2. 3. 4 Hand Tool s

Hand t ool s can be used, when appr oved, f or r emovi ng def ect i ve seal ant f r om cr acks and r epai r i ng or c l eani ng t he cr ack f aces.

2. 3. 5 Cr ack Seal i ng Equi pment

Pr ovi de uni t appl i cat or s, used f or heat i ng and i nst al l i ng t he hot - pour ed cr ack seal ant mat er i al s, t hat ar e mobi l e and equi pped wi t h a doubl e- boi l er , agi t at or - t ype ket t l e wi t h an oi l medi um i n t he out er space f or heat t r ansf er ; a di r ect - connect ed pr essur e- t ype ext r udi ng devi ce wi t h a nozzl e shaped f or i nser t i ng i n t he pr epar ed cr ack t o be f i l l ed; posi t i ve t emper at ur e devi ces f or cont r ol l i ng t he t emper at ur e of t he t r ansf er oi l and seal ant ; and a r ecor di ng t ype t her momet er f or i ndi cat i ng t he t emper at ur e of t he seal ant . Al l ow t he seal ant t o c i r cul at e t hr ough t he del i ver y hose and r et ur n t o t he i nner ket t l e when not i n use.

SECTI ON 32 01 17. 61 Page 3

PART 3 EXECUTI ON

3. 1 PREPARATI ON OF CRACKS

I mmedi at el y bef or e t he i nst al l at i on of t he cr ack seal ant , t hor oughl y dr y and cl ean t he cr acks t o r emove oxi di zed pavement , l oose aggr egat e and f or ei gn debr i s. Pr epar e cr acks as f ol l ows:

3. 1. 1 Cr acks

3. 1. 1. 1 Hai r l i ne Cr acks

Cr acks t hat ar e l ess t han 1/ 4 i nch wi de do not need t o be seal ed.

3. 1. 1. 2 Smal l and Medi um Cr acks

Rout cr acks t hat ar e 1/ 4 t o 1- 1/ 2 i nches wi de t o a nomi nal wi dt h 1/ 8 i nch gr eat er t han t he exi st i ng nomi nal wi dt h and t o a dept h not gr eat er t han 3/ 4 i nch. Cl ean and dr y usi ng compr essed ai r or a heat l ance.

3. 1. 2 Exi st i ng Seal ant Removal

Cut l oose t he i n- pl ace seal ant f r om bot h cr ack f aces and t o a dept h shown on t he dr awi ngs. Remove seal ant t o a dept h suf f i c i ent t o accommodat e any backer r od mat er i al t hat i s r equi r ed t o mai nt ai n t he dept h of new seal ant t o be i nst al l ed. Pr i or t o f ur t her c l eani ng oper at i ons, r emove al l ol d l oose seal ant r emai ni ng i n t he cr ack openi ng by bl owi ng wi t h compr essed ai r .

3. 1. 3 Rout i ng

Per f or m r out i ng of t he cr acks usi ng a r ot ar y r out er wi t h a bi t t hat i s at l east 1/ 8 i nch wi der t han t he nomi nal wi dt h of t he cr ack t o r emove al l r esi dual ol d seal ant ( r eseal i ng) , oxi di zed pavement and any l oose aggr egat e i n t he cr ack wal l .

3. 1. 4 Cl eani ng

Use compr essed ai r or a heat l ance t o c l ean t he cr ack f aces and t he pavement sur f aces ext endi ng a mi ni mum of 1/ 2 i nch f r om t he cr ack edges.

Use a mul t i pl e- pass t echni que unt i l t he sur f aces ar e f r ee of dust , di r t , ol d seal ant r esi due, moi st ur e, or f or ei gn debr i s t hat mi ght pr event t he seal ant mat er i al f r om bondi ng t o t he asphal t pavement . Use a heat l ance when pavement t emper at ur e i s l ess t han 40 degr ees F. Do not bur n t he pavement , a s l i ght dar keni ng i s accept abl e. I mmedi at el y f ol l ow t he heat l ance wi t h t he seal i ng oper at i on.

3. 1. 5 Backer Rod Mat er i al

When r equi r ed, use backer r od mat er i al i n al l cr acks t hat ot her wi se woul d r equi r e excessi ve seal ant or exceed t he seal ant r eser voi r dept h. I nser t t he backer r od mat er i al i nt o t he l ower por t i on of t he cr ack as shown on t he dr awi ngs. Pl ace t he backer r od so t hat t he t op of t he backer r od i s a maxi mum of 3/ 4 i nch and a mi ni mum wi dt h t o dept h r at i o of 1 bel ow t he t op of t he pavement . Ensur e t hat t he backer r od mat er i al i s pl aced evenl y at t he speci f i ed dept h and i s not st r et ched or t wi st ed dur i ng i nst al l at i on.

SECTI ON 32 01 17. 61 Page 4

3. 1. 6 Rat e of Pr ogr ess of Cr ack Pr epar at i on

Li mi t t he st ages of cr ack pr epar at i on, whi ch i ncl ude r out i ng, ai r pr essur e or heat l ance cl eani ng and pl aci ng of t he backer r od mat er i al , t o onl y t hat l i near f oot age t hat can be seal ed dur i ng t he same day.

3. 2 PREPARATI ON OF SEALANT

Do not heat hot - pour ed seal ant s i n excess of t he saf e heat i ng t emper at ur e r ecommended by t he manuf act ur er , as shown on t he seal ant cont ai ner s.

Wi t hdr aw and wast e seal ant t hat has been over heat ed or subj ect ed t o appl i cat i on t emper at ur es f or over 4 hour s or t hat has r emai ned i n t he appl i cat or at t he end of t he day' s oper at i on.

3. 3 I NSTALLATI ON OF SEALANT

Submi t manuf act ur er ' s i nst r uct i ons 30 days pr i or t o t he use of t he mat er i al on t he pr oj ect . I nst al l at i on of t he mat er i al wi l l not be al l owed unt i l t he i nst r uct i ons ar e r ecei ved.

3. 3. 1 Ti me of Appl i cat i on

Seal cr acks i mmedi at el y f ol l owi ng f i nal c l eani ng and dr yi ng of t he cr ack wal l s and f ol l owi ng t he pl acement of t he backer r od mat er i al ( when r equi r ed) . Pl ace seal ant onl y when cr acks ar e dr y. Recl ean cr acks t hat cannot be seal ed under t he condi t i ons speci f i ed, or when r ai n i nt er r upt s seal i ng oper at i ons, and al l ow t o dr y or dr y by mechani cal means pr i or t o i nst al l i ng t he seal ant .

3. 3. 2 Seal i ng t he Cr ack

I mmedi at el y pr ecedi ng, but not mor e t han 50 f eet ahead of t he cr ack seal i ng oper at i ons, per f or m a f i nal c l eani ng and dr yi ng wi t h compr essed ai r or heat l ance. Thi s di st ance can be i ncr eased i f demonst r at ed and appr oved dur i ng t he t est sect i on. Fi l l t he cr acks f r om t he bot t om of r eser voi r f or med by t he r out i ng or t he t op of t he backer r od up t o 1/ 8 i nch bel ow t he pavement sur f ace. Remove excess or spi l l ed seal ant f r om t he pavement by appr oved met hods and di scar d i t . I nst al l t he seal ant i n a manner whi ch pr event s t he f or mat i on of voi ds and ent r apped ai r . Make mul t i pl e passes wi t h t he appl i cat or wand as necessar y t o obt ai n t he speci f i ed seal ant dept h f r om t he pavement sur f ace. Do not use gr avi t y met hods or pour i ng pot s t o i nst al l t he seal ant mat er i al . Do not per mi t t r af f i c over newl y seal ed pavement unt i l aut hor i zed. Check seal ed cr acks f r equent l y t o ensur e t hat t he newl y i nst al l ed seal ant i s cur ed t o a t ack- f r ee condi t i on wi t hi n 3 hour s.

3. 4 CLEANUP

Upon compl et i on of t he pr oj ect , r…