Attach_10_Special_Pkg_Instructions.pdf

PDF 669 KB Posted May 8, 2026

Attached to: T-38 Wingtips Federal contract opportunity
Solicitation number: FA8212-26-R-0003_v2
Issued by: Department of the Air Force Materiel Command Air Force Sustainment Center

About this file

Written by GovTribe AI · May 8, 2026

This is a Special Packaging Instruction (SPI) document issued by the Department of Defense for aircraft tips. The SPI number is F01-073-2313 with Code ID 98747, dated May 6, 2019, and distributed to DoD and U.S. DoD contractors only. The document specifies packaging requirements for TIP, AIRCRAFT items under military preservation standard MIL-STD-2073, with serviceable and unserviceable methods both rated at level 10. Packaging is available in two protection levels: Level A for the most severe worldwide shipment, handling, and storage conditions (including war reserve material and strategic deployment scenarios), and Level B for standard conditions. Level A containers measure 51" L x 32" W x 5 3/4" D (center I.D.) or 54" L x 33 1/2" W x 10" D (center O.D.), while Level B containers measure 49 1/2" L x 30 1/2" W x 5" D (center I.D.) or 50 5/8" L x 31 5/8" W x 5 3/8" D (center O.D.). The item itself weighs 12 pounds and measures 45 1/8" L x 26 3/8" W x 2 1/4" D.

The packaging components specified on page 2 include steel strapping, filament and masking tape, wrap material, cushioning end and side materials, pads, skids, and lids, with detailed material specifications and quantities listed for each component. All wooden lumber, pallets, and containers must comply with International Standards for Phytosanitary Measures (ISPM No. 15) requirements, utilizing debarked wood treated with heat (56 degrees Celsius or 133 degrees Fahrenheit for 30 minutes) and bearing certification/marking from an accredited agency recognized by the American Lumber Standards Committee (ALSC). The document includes caution notices specifying that previously packaged assets do not require repackaging if SPI integrity is maintained, and that packaging material may be substituted if it meets MIL-STD-2073 requirements with equal or better protection at no increased cost.

View the file

Other files for this federal contract opportunity

Other files attached to T-38 Wingtips, newest first.
File	Type	Posted
JA T38 Wingtips_4Mar2026.pdf	PDF	May 8, 2026
Attach_04_IUID_1560015272195XE.pdf	PDF	May 8, 2026
Attach_01_RFO_Provision_and_Clause_Matrix_v2_FA821226R0003.pdf	PDF	May 8, 2026
Attach_09_Pkg_Requirements.pdf	PDF	May 8, 2026
Attach_06_GFP_List_2026.docx	DOCX document	May 8, 2026
Attach_03_RFO_Proposal_ Adequecy_Checklist_and_Cost_Information_Requirement.docx	DOCX document	May 8, 2026
Exhibit_A_CDRL_A001_GFP_Annual_Inventory_Report_FD20202600475.pdf	PDF	May 8, 2026
Attach_07_1560015272195XE.pdf	PDF	May 8, 2026
Attach_08_1560015272194XE.pdf	PDF	May 8, 2026
FA821226R0003_v2_T-38 Wingtips_Closes 15Jul2026.pdf	PDF	May 8, 2026
Attach_11_Transportation_Funds.pdf	PDF	May 8, 2026
Attach_05_IUID_1560015272194XE.pdf	PDF	May 8, 2026
Attach_02_RFO_FARS_Provisions.docx	DOCX document	May 8, 2026

Show all 13

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DOD AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 06 MAY 2019. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406 SCMS/GULAA, (PACKAGING

DIVISION), HILL AFB, UTAH 84056.

DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

AutoCAD SHX Text

12 LBS

AutoCAD SHX Text

ITEM WT.

AutoCAD SHX Text

2169 MOD

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

FORM

AutoCAD SHX Text

LEVEL B:

AutoCAD SHX Text

LEVEL A:

AutoCAD SHX Text

CLOSURE

AutoCAD SHX Text

IAW: ASTM D1974

AutoCAD SHX Text

IAW: ASTM D6880

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPI NO. F01-073-2313

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text 98747

AutoCAD SHX Text

DESIGN FRAGILITY G

AutoCAD SHX Text

SPEC STYLE TYPE CL VRTY GR TR

AutoCAD SHX Text

AS SPECIFIED BELOW AND BILL OF MATERIALS

AutoCAD SHX Text

ILL.

AutoCAD SHX Text

NATIONAL STOCK NO.

AutoCAD SHX Text

PART OR DRAWING NO.

AutoCAD SHX Text

CURRENT

AutoCAD SHX Text

SPECIAL MARKINGS:

AutoCAD SHX Text

A) SPI NO. F01-073-2313

AutoCAD SHX Text

PRESERVATIVE: N/A

AutoCAD SHX Text

UNSERVICEABLE METHOD: 10

AutoCAD SHX Text

CLEANING & DRYING: IAW MIL-STD-2073

AutoCAD SHX Text

MILITARY PRESERVATION IAW MIL-STD-2073

AutoCAD SHX Text

B) REUSABLE CONTAINER & DUNNAGE DO NOT DESTROY.

AutoCAD SHX Text

MARKING IAW MIL-STD-129

AutoCAD SHX Text

QUP

AutoCAD SHX Text

ICQ

AutoCAD SHX Text

CNTR O.D.

AutoCAD SHX Text

LEVEL B:

AutoCAD SHX Text

ITEM DIM

AutoCAD SHX Text

LEVEL A:

AutoCAD SHX Text

CNTR I.D.

AutoCAD SHX Text

LEVEL B:

AutoCAD SHX Text

LEVEL A:

AutoCAD SHX Text

GROSS WT LBS

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text

PACKING

AutoCAD SHX Text

LEVEL

AutoCAD SHX Text

GROSS CU FT

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

ASTM D5118

AutoCAD SHX Text

ASTM D6880 (MOD)

AutoCAD SHX Text

REV

AutoCAD SHX Text

DATE

AutoCAD SHX Text

ORIGINAL

AutoCAD SHX Text

CHK.

AutoCAD SHX Text

AUTH.

AutoCAD SHX Text P.S.

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text 31 5/8

AutoCAD SHX Text 33 1/2

AutoCAD SHX Text 26 3/8

AutoCAD SHX Text

AutoCAD SHX Text 50 5/8

AutoCAD SHX Text 45 1/8

AutoCAD SHX Text

AutoCAD SHX Text 5 3/8

AutoCAD SHX Text 2 1/4

AutoCAD SHX Text

LENGTH WIDTH DEPTH

AutoCAD SHX Text 30 1/2

AutoCAD SHX Text

AutoCAD SHX Text 49 1/2

AutoCAD SHX Text

AutoCAD SHX Text 5 3/4

AutoCAD SHX Text

LEVEL A LEVEL B

AutoCAD SHX Text 10.469

AutoCAD SHX Text

AutoCAD SHX Text 4.980

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

SHEET 1 OF 5

AutoCAD SHX Text

K. KNIGHTON K. RESTORFF R. TOMAC N. CORONADO

AutoCAD SHX Text

1560-01-073-2313 XE

AutoCAD SHX Text 2-21100-510

AutoCAD SHX Text

TIP, AIRCRAFT

AutoCAD SHX Text F01-073-2313

AutoCAD SHX Text B

AutoCAD SHX Text V3c

AutoCAD SHX Text

FTC

AutoCAD SHX Text 13098

AutoCAD SHX Text

MARK THE SPI NUMBER ON THE IDENTIFICATION SIDE OF CONTAINER.

AutoCAD SHX Text

SERVICEABLE METHOD: 10

AutoCAD SHX Text A

AutoCAD SHX Text

REVISIONS

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

LTR

AutoCAD SHX Text

DATE

AutoCAD SHX Text A

AutoCAD SHX Text

UPDATED DIMENSIONS, ADDED DISTRIBUTION STATEMENT AND DESTRUCTION NOTICE

AutoCAD SHX Text 19133

REQD

AutoCAD SHX Text P/N

AutoCAD SHX Text

QTY

AutoCAD SHX Text SIZE: (INCHES UNLESS SPECIFIED) TOLERANCES ON FRAC. ± , 18, DECIMAL ± .10, ANGLES ± 1°

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

NOMENCLATURE OR

AutoCAD SHX Text

SPECIFICATION

AutoCAD SHX Text

MATERIAL

AutoCAD SHX Text 2 A/R A/R A/R 1 1 1 2 2 2 2

AutoCAD SHX Text STRAPPING, STEEL (LVL A ONLY) (LVL A ONLY) TAPE, FILAMENT TAPE, MASKING WRAP CUSHIONING, END CUSHIONING, END CUSHIONING, SIDE CUSHIONING, TOP & BOTTOM PAD, TOP & BOTTOM SKID LID, TOP & BOTTOM

AutoCAD SHX Text 3/4 X 0.015 X AS REQUIRED 3/4 X AS REQUIRED 1 X AS REQUIRED 60 X 49 26 X 4 1/2 X 2 26 X 17 X 2 49 1/2 X 2 X 2 49 1/2 X 30 1/2 X 1 49 1/2 X 30 1/2 X 1/4 4 X 4 (NOM) X 33 3/8 52 1/2 X 33 1/2 X 3/8

AutoCAD SHX Text ASTM D3953 TYPE 1, RD, FIN. A ASTM D5330 TYPE I OR II ASTM D6123 TYPE I OR II A-A-3174 TY. I, CL. 1, GR. A, FIN. 1 A-A-59136 CLASS 1, GRADE A A-A-59136 CLASS 1, GRADE A A-A-59136 CLASS 1, GRADE A A-A-59136 CLASS 1, GRADE A ASTM D4727 CF, DOM, DW, GRADE 200 ASTM D6199 CLASS 2 A-A-55057 TYPE A

AutoCAD SHX Text -11 -10 -9 -8 -7 -6 -5 -4 -3 -2 -1

AutoCAD SHX Text

2169C MOD

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

FORM

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

SHEET 2 OF 5

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

TIP, AIRCRAFT

F01-073-2313

NOTES

1. WRAP ITEM IN REF.-8 AND SECURE WITH REF.-9.

2. ILLUSTRATION IS FOR RIGHT HAND AND LEFT HAND WING TIPS.

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

REVISION OF ISPM NO. 15

REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD

PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE

PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND

COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE

(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD

PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF

HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).

CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS

COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR

PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

CAUTION NOTICES

NOTICE 1: ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI DO NOT REQUIRE

REPACKAGING IF THE INTEGRITY OF THE SPI IS MAINTAINED.

NOTICE 2: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.

NOTICE 3: PACKAGING MATERIAL MAY BE SUBSTITUTED IF IT MEETS THE REQUIREMENTS OF MIL-STD-2073, PROVIDES EQUAL OR BETTER PROTECTION AND THERE IS NO INCREASED COST TO THE GOVERNMENT.

NOTICE 4: FOR LEVEL A PACKAGING REQUIREMENTS, LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED

CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A.

NOTICE 5: LEVEL A PROTECTION REQUIRED TO MEET THE MOST SEVERE WORLDWIDE SHIPMENT, HANDLING, AND

STORAGE CONDITIONS. EXAMPLES OF SITUATIONS ARE: WAR RESERVE MATERIAL, MOBILIZATION, STRATEGIC AND

THEATER DEPLOYMENT, OPEN STORAGE AND DECK LOADING. SECURITY ASSISTANCE ITEMS, INCLUDING FMS, ARE

ESPECIALLY SUSCEPTIBLE TO DAMAGE DUE TO UNKNOWN AND UNFAVORABLE TRANSPORTATION, CLIMATIC, AND

STORAGE CONDITIONS. PROVIDE LEVEL B PACKING UNLESS OTHERWISE DIRECTED BY THE PROCURING COUNTRY.

AutoCAD SHX Text

2169C MOD

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

FORM

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

SHEET 3 OF 5

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text

TIP, AIRCRAFT

F01-073-2313

AutoCAD SHX Text

2169C MOD

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

FORM

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

SHEET 4 OF 5

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text

DETAIL B

AutoCAD SHX Text

DETAIL A

AutoCAD SHX Text

AutoCAD SHX Text -7

AutoCAD SHX Text -6

AutoCAD SHX Text

TIP, AIRCRAFT

AutoCAD SHX Text F01-073-2313

AutoCAD SHX Text

DETAIL B

DETAIL A

ITEM REFERENCE

AutoCAD SHX Text

2169C MOD

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

FORM

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

SHEET 5 OF 5

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text

TIP, AIRCRAFT

AutoCAD SHX Text F01-073-2313

AutoCAD SHX Text -10

AutoCAD SHX Text -9

AutoCAD SHX Text -6

AutoCAD SHX Text -5

AutoCAD SHX Text -4

AutoCAD SHX Text -3

AutoCAD SHX Text -7

AutoCAD SHX Text -5

AutoCAD SHX Text -8

AutoCAD SHX Text -3

AutoCAD SHX Text -4

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text B

File details come from the government source that posted it. Updated May 8, 2026.