Attach 1 - SPECS - Portable Ramps.pdf
PDF 247 KB Posted
- Attached to
- 20K Portable Loading Dock/Ramp Rental/Lease
- Solicitation number
- FA4897QC079
About this file
This document contains the specifications for a Request for Quotation (RFQ) from the Department of the Air Force Air Combat Command seeking two portable loading docks/ramps for use at Mountain Home AFB in Idaho and Wendover Airfield in Utah. The ramps must have a minimum usable surface area of 84" wide by 26' long, a 20,000 lb weight capacity, and the ability to adjust up to 52" in height. The contractor shall be responsible for the delivery, installation, and training of government personnel on the use of the ramps. The rental period is from October 10, 2024 to November 7, 2024. This RFQ is a 100% total small business set-aside with a NAICS code of 332312 - Fabricated Structural Metal Manufacturing. Quotes are due no later than October 1, 2024 by 2:00 PM MST.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPECS-20K portable loading docks 1 Oct 24.pdf | ||
| COMBO-RFQ FA4897QC079 - Portable dock-ramp.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPECIFICATION SHEET
Mountain Home AFB, ID
Portable Loading Dock/Ramp Rental 09 Sept 2024
1. GENERAL: Units of the 366th Fighter Wing located in Mountain Home, ID require 2 portable loading docks or ramps to onload and offload vehicles from tractor trailers.
2. Portable Loading Docks/Ramps MINIMUM SPECIFICATIONS: must (at a minimum) comply with the following salient characteristics:
2.1. Physical Characteristics. The ramps will be used to unload/load military equipment vehicles and forklifts.
2.1.1. Usable Surface Dimensions: 84”W x 26’L.
2.1.2. Weight Capacity: 20,000 lbs.
2.1.3. Adjustable up to 52” in height
2.1.4. Wheeled to ensure ease of transportation for short distances
3. INSTALLATION: The Contractor shall provide all personnel, equipment, tools, materials, supervision, transportation, and other items needed to setup/install the requested Ramps.
3.1. The Contractor shall assemble and install all requested equipment in accordance with
(IAW) manufacturer’s specifications. (If needed/applicable)
3.2. The Contractor shall ensure proper location and orientation of the ramps upon advisement of military personnel
3.3. Any equipment not functioning properly IAW manufacture’s specifications shall be diagnosed and repaired by the Contractor.
4. TRAINING: The Contractor shall conduct training of entire system to Government personnel.
4.1. Following completion of installation, the Contractor shall provide technical support if there are any issues either by telephone or in person.
5. LOCATION & DELIVERY:
3.1. Shipping must be included in the quotation.
3.1.1. Contractor shall deliver one (1) unit to the Twin Falls Airport, 492 Airport Loop, Twin Falls, ID 83301
3.1.2. Contractor shall deliver one (1) unit to Wendover Airfield, Utah. 345 Airport Apron, Wendover UT 84083.
3.1.2. Rental period for both units will be 10 October 2024 – 7 November 2024.
File details come from the government source that posted it. Updated .