Attach 1 Marking Diagram.pdf

ASHE201003

AIRFIELD MARKINGS NORTH

March 2021

Airfield Markings North Scope of Work Clean the existing marking before repaint.

Remove with Hydro-clean and Vacuum all deceptive surface markings, all the markings indicated and repaint.

Paint new markings as indicated.

Airfield Markings North Scope of Work Remove selected markings in their entirety (100%).

Add new markings as shown.

Clean existing markings before paint with brush.

Repaint existing markings, letters, signs, etc. as per technical specification and drawings.LEGEND

: MOTORCYCLE TRAINING COURSE AREA

: DANGER / DOOR OPERATIONS SIGN

YELLOW, BLACK, WHITE and RED LINES - item # 2-3-4-5-7-8-9 Scope of Work Remove with hydro pressure and vacuum system ALL the existing Edge Stripes and Shoulder Stripes of Alpha Taxiway. Edge stripes will be re-paint as per previous position, shoulder must be repaint conform to distances and dimensions as per UFC 3-260-04 Figure 8-11 (attached). Paint yellow reflective paint plus post spray glass bids.

#2 Edge Stripes UFC 3-260-04 Chapter 6-3.1 2 6”/15cm lines with 6”/15cm in between and Retro reflective

#3 Shoulder Stripes UFC 3-260-04 Chapter 8-11

3’/ 0.9m wide 30’/ 9.1m apart on curves max

100’/ 30.5m apart max 25’/ 7.6m long or to within

5’/ 1.5m of pavement edge New taxiway shoulder markings must end within 5 ft (1.5m) of the pavement edge, but they can’t be longer than 25 ft (7.6m). Max distance between shoulders markings is 30.5 m.

During the marking removal of existing marking with hydro-clean system, the Contractor is responsible to protect properly the existing lights and will be responsible for any damage.

YELLOW, BLACK, WHITE and RED LINES - item # 2-3-4-5-7-8-9

#4 Towway UFC 3-260-04 Chapter 6-5.9 Single solid line 6”/15cm wide.

Retroreflective paint and post-spray beads.

Scope of Work Stripes and Shoulder Stripes shall be removed with hydro pressure and vacuum system and repainted using yellow reflective paint plus post spray glass bids.

Clean existing markings, remove dirt before repaint.

Yellow/White: reflective paint plus post spray glass bids, conform to specifications, drawings and existing condition in accordance with CONS and CES instructions.

#7- RED– Restricted line UFC 3-260-04 Chapter 6-5.10

6”/15 mm d wide retro reflective.

Victor Loop Motorcycle Training Course and other details – item # 6 Scope of Work Repaint as existing markings.

WARNING SIGN – Restricted area - item # 11 Scope of Work Re-paint warning sign same as the existing.

Reflective white paint plus post spray glass bids, Black and Red letters conform to Specifications.

Pavement Signs UFC 3-260-04 Chapter 6-5.10 Spacing between signs should be no more than 100’/30.5m

Dimensions: 130 cm by 58 cm

DANGER SIGNS – Door Operations - item # 12 Scope of Work

Hydro pressure marking removal and vacuum all the existing “DANGER” marking signs and repaint.

The new signs will have re-paint in the same position, with dimensions, colors and type as the existing.

Pavement Signs UFC 3-260-04 Chapter 6-5.10

Dimensions: 51 cm by 38 cm

CAMERA BOXE CONTAINER – item # 13 Scope of Work Re-paint existing signs same dimensions and type as the existing.

Clean existing markings, remove dirt before repaint.

Reflective white paint plus post spray glass bids conform to specification.

61 cm

61 cm

Black stripe 5 cm

STOP and STOP CHECK FOD – item # 14 - 15 Scope of Work

Clean and repaint existing markings same dimensions and type as the existing or mark and paint a new FOD were is missed as shown in the big map.

Remove with hydro pressure and vacuum system all deceptive surface marking and repaint as per contract.

200 cm

160 cm

50 cm

Variable

#14 AFMAN 13-204V2, 2.3.2.10.1

Coordinate with CE, Safety, Aircraft Maintenance and FOD Manager on the FOD Prevention Program and to ensure stop bars, stop signs and check for FOD signs as required, are located on roads prior to entering airfield areas and vehicular roads intersecting runways, taxiways or aprons. (T-3). (See UFC 3-260-01, AFI 21-101, and applicable Engineering Technical Letters, International Civil Aviation Organization, North Atlantic Treaty Organization or Standardized Agreement for additional information). Stop bar (SDDCTEA pamphlet 55-17, chapter 8.2.13)

12” minimum 24” maximum across the whole line

ENTRY CONTROL POINT (ECP) – item # 16

Remove with hydro pressure and vacuum system ALL the entry control point markings and re-paint as the existing, same dimensions and type. Reflective white paint plus post spray glass beads.

YELLOW NOSE WHEEL – item # 17

Scope of Work Clean and repaint existing signs same dimensions and type as the existing. Reflective yellow paint plus post spray glass beads.

Parking Stop Bars UFC 3-260-04 Chapter 6-4 Parking Stop Bars 3' x 1' centered on centerline

Parking Stop Bars UFC 3-260-04 Chapter 6-5.10 Figure 6-17

VFR NUMBER – item # 18

Remove with hydro pressure and vacuum system ALL the signs and re-paint as the existing, same dimensions and type

Surface Painted Hold Positions UFC 3-260-04, 6-5.6 & Figure 6-10

FDLP – item # 19

Clean and re-paint as the existing, same dimensions and type.

Reflective white paint plus post spray glass beads.

ARM/DE-ARM SAFETY ZONE – item # 20

Scope of Work Clean and re-paint as the existing, same dimensions and type.

Reflective yellow paint plus post spray glass beads and black.

F-16 ENGINE INLET DANGER AREA PAVEMENT MARKINGS. UFC 3-260-04, Chapter 8-17

RUNWAY, TAXYWAY AND APRON AREA CLOSURE MARKINGS - item # 21 Scope of Work

Remove with hydro-pressure and vacuum system ALL the existing closure markings and re-paint, yellow reflective paint plus post spray glass bids, in the same position and with correct dimensions as per UFC 3-260-04 Figure 8-1 (attached).

Closure marking before victor shall not be repainted, only removed with hydro-pressure and vacuum system.

UFC 3-260-04 Chapters:

8-3 PERMANENTLY CLOSED TAXIWAYS OR

TAXILINES

8-4 PERMANENTLY CLOSED APRONS

Figures 8-1 , 8-2 and 8-3

HOLD SIGN FOR TAXIWAYS AND APRON MARKING (black-Yellow) – item # 22 Scope of Work Remove with hydro pressure and vacuum system ALL the Hold Sign for Taxiways and Apron Marking and re-paint as the existing, same dimensions and type. Reflective yellow paint plus post spray glass beads and black.

VFR Runway Holding Position UFC 3-260-04 Chapter 6-5.10 Figure 6-3

MIKE LOOP Marking – item # 23

Remove existing M01-M02-M03…. with hydro pressure and vacuum system and re-paint, yellow reflective paint plus post spray glass bids, in the same position and with correct dimensions as per UFC 3-260-04.

150 cm

0,7 cm

0,7 cm

180 cm

OPEN TO HERE– item # 24

Scope of Work Clean and re-paint as the existing, same dimensions and type.

Reflective red paint and white letters.

Dimensions: 180by150 cm – 180by70cm – 180by70cm Dimensions: 140 cm by 60 cm

YELLOW GROUNDING CIRCLE – item # 26

Clean and repaint all existing grounding circles signs same dimensions, Ø 50cm, and type as the existing. Reflective yellow paint plus post spray glass beads.

WHITE BOX– item # 25

Scope of Work Clean and re-paint as the existing, same dimensions and type.

Reflective white paint plus post spray beads.

Dimensions: 3.6 m by 1.2 m - Line 15 cm Dimensions: Ø 50 cm

HANGAR #1 - RED CARPET– item # 29

Red carpet shall be removed with hydro pressure and vacuum system and repaint using red reflective conform to specifications.

WARM-UP PAD – item # 27

Scope of Work Clean and repaint existing re-paint as the existing, same dimensions and type. Reflective Yellow paint plus post spray beads and Black letters and numbers.

Dimensions: 0.4 by 0.6 m and 0.6 by 0.6 m

SHELTER NUMBER – item # 28

Scope of Work Clean and repaint existing re-paint as the existing, same dimensions and type. Reflective Yellow paint plus post spray beads and Black letters and numbers.

Dimensions: 1.2 by 0.3 m and 0.6 by 0.6 m Dimensions: 1.5 by 49 m + 3.8 by 2.2 m