Attach_09_Pkg_Requirements.pdf
PDF 70 KB Posted
- Attached to
- T-38 Wingtips RH & LH Federal contract opportunity
- Solicitation number
- FA8212-26-R-0003
About this file
This is an AFMC Form 158 Packaging Requirements document for Purchase Instrument Number FD20202600475-00, Version 2, issued by the 406 SCMS/GULAA organization with packaging specialist Stephine A. Lucero (801-775-4142), dated March 17, 2026.
The document establishes packaging and marking requirements for three line items: 1560015272194XE, 1560015272195XE, and 1560DTG260258XE. For the first two items, all wooden lumber, pallets, and containers must be constructed from debarked wood and heat-treated to 56 degrees Celsius (133 degrees Fahrenheit) for 30 minutes in compliance with United Nations restrictions on wood packaging material (WPM), specifically addressing invasive species like the pinewood nematode. Certification and marking are required by an accredited agency recognized by the American Lumber Standards Committee (ALSC), with reference to International Standards for Phytosanitary Measures (ISPM No. 15). Items shall be packaged in accordance with MIL-STD-2073-1 (Standard Practice for Military Packaging) at Preservation Level MIL and Packaging Level B, with SPI F010732313 Revision A dated May 13, 2019. Shipping containers must be marked per MIL-STD-129 Revision R (Standard Practice for Military Marking), including additional marking requirements such as unit serial numbers, original equipment manufacturer (OEM) names, and OEM model numbers as specified on the AFMC Form 158. The third item (1560DTG260258XE) requires no packaging data.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| FA821226R0003_T-38 Wingtips_Closes 9Jun2026.pdf | ||
| Attach_01_RFO_Provision_and_Clause_Matrix_FA821226R0003.docx | DOCX document | |
| Attach_08_1560015272194XE.pdf | ||
| Attach_03_RFO_Proposal_ Adequecy_Checklist_and_Cost_Information_Requirement.docx | DOCX document | |
| Attach_01_RFO_Provision_and_Clause_Matrix_FA821226R0003.xlsx | XLSX spreadsheet | |
| Attach_02_RFO_FARS_Provisions.docx | DOCX document | |
| Exhibit_A_CDRL_A001_GFP_Annual_Inventory_Report_FD20202600475.pdf | ||
| Attach_11_Transportation_Funds.pdf | ||
| Attach_07_1560015272195XE.pdf | ||
| Attach_06_GFP_List_2026.docx | DOCX document | |
| Solicitation Notice FA8212-26-R-0003.pdf | ||
| Attach_01_RFO_Provision_and_Clause_Matrix_FA821226R0003.pdf | ||
| Attach_10_Special_Pkg_Instructions.pdf | ||
| Attach_05_IUID_1560015272194XE.pdf | ||
| Attach_04_IUID_1560015272195XE.pdf |
Show all 15
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PACKAGING REQUIREMENTS
PURCHASE INSTRUMENT NUMBER: FD20202600475-00 VERSION: 2
MIL-STD 129 REVISION: R MIL-STD 2073-1 REVISION: E
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES). WOODEN LUMBER, WOODEN
PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLET'S, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES" (ISPM)NO.15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
PACRN: PACKAGING REQUIREMENT: PRESERVATION LEVEL: PACKAGING LEVEL: SPI: SPI REV: SPI DATE:
AAA MIL-STD-2073-1 / SPI MIL B F010732313 A 19133 - 13 MAY 2019
ITEM(S):
1560015272194XE 1560015272195XE
CODED DATA:
QUP ICQ
PRES
METH CD
PRES
MTL
WRAP
MTL
CUSH
DUNN CT
UNIT
CONT
INT
CONT UCL
SPEC
MKG
UNIT PACK
WEIGHT
UNIT PACK
LENGTH
UNIT PACK
WIDTH
UNIT PACK
DEPTH
UNIT PACK
CUBE OPI
ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS:
SUPPLEMENTAL PACKAGING INSTRUCTION TEXT:
VENDOR PACKAGING INSTRUCTIONS:
Military Packaging and Marking Items shall be packaged in accordance with MIL-STD-2073-1, Standard Practice for Military Packaging. Shipping and storage markings shall be in accordance with MIL-STD-129, Standard Practice for Military Marking.
Shipping Container Marking Shipping containers shall be marked meeting the following criteria: (a) MIL-STD-129, Standard Practice for Military Marking. (b) Additional marking and/or bar coding requirements exceeding those of MIL-STD-129 (e.g., unit serial numbers, original equipment manufacturers (OEM) name, or OEM model number, as specified on the AFMC Form 158.
Page 1 of 2AFMC 158 Version 2Generated by PRPS using Jasper Reports on 18 Mar 2026
PACKAGING REQUIREMENTS
PACRN: PACKAGING REQUIREMENT: PRESERVATION LEVEL: PACKAGING LEVEL: SPI: SPI REV: SPI DATE:
AAB No Packaging Data Required
ITEM(S):
1560DTG260258XE
CODED DATA:
QUP ICQ
PRES
METH CD
PRES
MTL
WRAP
MTL
CUSH
DUNN CT
UNIT
CONT
INT
CONT UCL
SPEC
MKG
UNIT PACK
WEIGHT
UNIT PACK
LENGTH
UNIT PACK
WIDTH
UNIT PACK
DEPTH
UNIT PACK
CUBE OPI
ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS:
SUPPLEMENTAL PACKAGING INSTRUCTION TEXT:
VENDOR PACKAGING INSTRUCTIONS:
ORGANIZATION / OFFICE SYMBOL:
406 SCMS / GULAA
PACKAGING SPECIALIST:
Lucero, Stephine A
PHONE NUMBER:
801-775-4142 / 775-4142
SIGNATURE:
//SIGNED//Lucero, Stephine A
DATE:
26076 - 17 MAR 2026
Page 2 of 2AFMC 158 Version 2Generated by PRPS using Jasper Reports on 18 Mar 2026
File details come from the government source that posted it. Updated .