Attach_01_Quality_Requirements.pdf
PDF 84 KB Posted
- Attached to
- B-2 BALL BEARINGS NSN 3110-01-338-6930RP
- Solicitation number
- FA8212-24-R-0006
About this file
This document is the Recommended Quality Assurance Provisions and Special Inspection Requirements for a federal contract opportunity. It outlines the quality requirements for the procurement of NSN 3110-01-338-6930RP B-2 ball bearings.
The key details are: The procurement is source-controlled by the Original Equipment Manufacturer, Hamilton Sundstrand DBA Collins Aerospace. All responsible qualified sources may submit a bid, proposal, or quotation. The contract requires the supplier to perform production lot testing in accordance with ANSI/ASQ Z1.4, using General Inspection Level II and an Acceptance Quality Limit of 1.0. The supplier must inspect all critical dimensions of the part per drawing 5907403 and provide a test report. The product is export controlled, and foreign participation is not allowed. The Technical Authority must be notified if a new source is selected using Acquisition Method Codes 3, 4, or 5. A quality pre-award survey is recommended for new sources.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
RECOMMENDED QUALITY ASSURANCE PROVISIONS
AND SPECIAL INSPECTION REQUIREMENTS
1. PR / MIPR NUMBER
2. NATIONAL STOCK NUMBER
3110013386930RP
3. POINT OF INSPECTION
SOURCE DESTINATION
X
SEE DFARS 246.402
4. POINT OF ACCEPTANCE
SOURCE DESTINATION
X
5. ITEM MANAGER / PHONE
Ross, Justin T / 801-775-4959
6. EQUIPMENT SPEC / PHONE
Langdon, Dillon / 801-775-4334
7. CONTRACT QUALITY REQUIREMENTS/SPECIAL INSPECTION REQUIREMENTS
CERTIFICATE OF CONFORMANCE
FAR 52.246-15
CONTRACT RESPONSIBILITY
FOR INSPECTION
FAR 52.246-1
STANDARD INSPECTION
FAR 52.246-2,-3,-4,-5 OR -6
AS APPLICABLE TO CONTRACT
HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
COMMERCIAL ITEM INSPECTION
FAR 52.212-4
X OTHER (Describe in Block 8)
8. REMARKS
Farr, Tosh PNAME: 03 JAN 2024DATE:
Perform production lot testing in accordance with ANSI/ASQ Z1.4, using General Inspection Level II and an Acceptance Quality Limit of 1.0. Inspect all critical dimensions of part, per drawing 5907403. Test Report Required may be satisfied by sending lot inspection results to local DCMA representative. If a local DCMA represntative is not available, send results to 419 SCMS/GUEA.
8a. OZONE DEPLETING SUBSTANCES (ODS)
X STATEMENT
"I HAVE REVIEWED THE REQUIREMENT, INCLUDING AVAILABLE TECHNICAL DOCUMENTATION, AND BELIEVE THAT IT DOES NOT REQUIRE THE CONTRACTOR USE CLASS I OZONE DEPLETING SUBSTANCES (ODS) IDENTIFIED IN AIR FORCE POLICY, NOR IS IT WRITTEN SO THAT IT CAN
ONLY BE MET BY THE USE OF A CLASS I ODS."
WAIVER (SEE AF FARS 5323)
NOTE: Quality provisions as annotated hereon will not be downgraded without Technical Authority coordination. The Technical Authority must be notified if award selection is made to a new source using Acquisition Method Code (AMC) 3, 4, or 5.
9. QUALITY PRE-AWARD SURVEY
YES X NEW SOURCE
PREVIOUS SOURCEX NO
AFMC PARTICIPATION
RECOMMENDED
10. CODES
A. I&A
B. CQR
I
11. SIGNATURE OF TECHNICAL AUTHORITY
Farr, Tosh P
ORGANIZATION / SYMBOL
419 SCMS / GUEA
PHONE
801-777-0927 / 777-0927
DATE
03 JAN 2024
Page 1 of 1AFMC FORM 807, 20060111, V1 Version 2Generated by PRPS using Jasper Reports on 12 Feb 2024
File details come from the government source that posted it. Updated .