Att. G - 1631931spc1of1.pdf

NAVFAC ATLANTIC

WORK ORDER NO. 1631931

CONTRACT NO. N62470-21-C-0003

Area A1 Entry Control Point

At the

Aviano Air Base, Aviano, Italy

PREPARED BY:

HDR

1917 S 67th St.

Omaha, NE 68106-2973

N62742-D-0004

Architectural: Richard McKinley, RA Telecommunications: Jim Zavadil, PE Civil: Christopher Podany, PE Electrical: Andrew Kaner, PE Structural: Svein Magnussen, PE Fire Protection: Erick Showalter, PE Cybersecurity: Jeffrey Monforton Security: John Smith, PE Landscape Architecture:

Anne Peterson, RLA Mechanical: Peter Koneck- Wilwerding, PE

Submitted By: Date: 04/08/2021

APPROVED BY:

For Commander, NAVFAC:

Date:

UNCLASSIFIED

Specifications:

THIS PAGE IS INTENTIONALLY LEFT BLANK

ITALIAN DECLARATION STATEMENT

HAVING PARTICIPATED IN THE DESIGN OF PROJECT NO. N62742-D-0004, AREA A1 ENTRY

CONTROL POINT, AVIANO AIR BASE, ITALY, AND HAVING THOROUGHLY REVIEWED THE

COMPLETED PROJECT DOCUMENTS, I DECLARE THAT THE FACILITY DESIGN INCLUDED

HEREIN COMPLIED WITH ALL APPLICABLE ITALY CODES AND LAWS.

AVENDO PARTECIPATO ALLA DEFINIZIONE DEL PROGETTO NO. N62742-D-0004, AREA A1

ENTRY CONTROL POINT, AVIANO AIR BASE, ITALY, ED AVENDO VERIFICATO ENTERAMENTE

LA DOCUMENTAZIONE, DICHIARIAMO CHE IL PRESENTE PROGETTO E' CONFORME ALLE

LEGGI E NORMATIVE TECNICHE VIGENTI IN ITALIA.

SEAL: DATE:

THIS PAGE IS INTENTIONALLY LEFT BLANK

SEALS AND SIGNATURES

I, JOHN D. SMITH, AM THE COORDINATING

PROFESSIONAL FOR THE AVIANO ENTRY

CONTROL POINT PROJECT

Sections covered by this seal:

Divisions 02 & 34

Divisions 03, 05, 13

Divisions 04, 06, 07, 08, 09, 10, 12

Divisions 22 & 23

Division 26, 33 71 02

27 10 00, 33 82 00

Division 31, 32 01 19.61, 32 11 20, 32 11 23, 32 12 13, 32 12 16.16 32 13 13.06, 32 16 19, 32 17 23, 32 31 13.53, 33 11 00, 33 30 00, 33 40 00, 46 25 14

32 05 33, 32 92 19, 32 93 00

P-23005 AREA A1 ENTRY CONTROL POINT; AVIANO AIR BASE, ITALY

Work Order No. 1631931 Contract No. N62470-21-C-0003

TABLE OF CONTENTS Page 1

PROJECT TABLE OF CONTENTS

DIVISION 00 - PROCUREMENT AND CONTRACTING REQUIREMENTS

00 01 15 LIST OF DRAWINGS

00 73 04 SUPPLEMENTARY CONDITIONS FOR PROJECTS IN MEDITERRANEAN AREA

00 73 04A VISITOR CONTROL CENTER TOC

DIVISION 01 - GENERAL REQUIREMENTS

01 11 00 SUMMARY OF WORK

01 14 00 WORK RESTRICTIONS

01 20 00.00 20 PRICE AND PAYMENT PROCEDURES

01 30 00 ADMINISTRATIVE REQUIREMENTS

01 32 17.00 20 COST-LOADED NETWORK ANALYSIS SCHEDULES (NAS)

01 32 17.00 20A CONTRACTOR BASELINE PROJECT SCHEDULE REVIEW CHECKLIST

01 32 17.00 20B CONTRACTOR MONTHLY UPDATE SCHEDULE REVIEW CHECKLIST

01 33 00 SUBMITTAL PROCEDURES

01 33 00A SUBMITTAL REGISTER

01 33 29 SUSTAINABILITY REPORTING

01 35 26 GOVERNMENTAL SAFETY REQUIREMENTS

01 42 00 SOURCES FOR REFERENCE PUBLICATIONS

01 42 15 METRIC MEASUREMENTS

01 45 00.00 20 QUALITY CONTROL

01 45 00.00 20A CONTRACTOR PROGRESS REPORT

01 45 35 SPECIAL INSPECTIONS

01 45 35A STATEMENT OF SPECIAL INSPECTIONS

01 45 35B SCHEDULE OF SPECIAL INSPECTIONS

01 50 00 TEMPORARY CONSTRUCTION FACILITIES AND CONTROLS

01 57 19 TEMPORARY ENVIRONMENTAL CONTROLS

01 57 19.01 20 SUPPLEMENTAL TEMPORARY ENVIRONMENTAL CONTROLS

01 58 00 PROJECT IDENTIFICATION

01 58 00A PROJECT IDENTIFICATION IMAGE

01 74 19 CONSTRUCTION WASTE MANAGEMENT AND DISPOSAL

01 78 00 CLOSEOUT SUBMITTALS

01 78 23 OPERATION AND MAINTENANCE DATA

01 78 24.00 20 FACILITY ELECTRONIC OPERATION AND MAINTENANCE

SUPPORT INFORMATION (eOMSI)

DIVISION 02 - EXISTING CONDITIONS

02 41 00 DEMOLITION

02 82 00 MMVF REMEDIATION

02 82 00A ENVIRONMENTAL AND HAZMAT REPORT

02 83 00 LEAD REMEDIATION

DIVISION 03 - CONCRETE

03 30 00 CAST-IN-PLACE CONCRETE

DIVISION 04 –

04 20 10 MARBLE WAINSCOT VENEER

TABLE OF CONTENTS Page 2

DIVISION 05 - METALS

05 12 00 STRUCTURAL STEEL

05 30 00 STEEL DECKS

05 40 00 COLD-FORMED METAL FRAMING

05 50 13 MISCELLANEOUS METAL FABRICATIONS

DIVISION 06 - WOOD, PLASTICS, AND COMPOSITES

06 10 00 ROUGH CARPENTRY

06 20 00 FINISH CARPENTRY

06 41 16.00 10 PLASTIC LAMINATE CLAD ARCHITECTURAL CABINETS

06 61 16 SOLID SURFACING FABRICATIONS

DIVISION 07 - THERMAL AND MOISTURE PROTECTION

07 14 00 FLUID-APPLIED WATERPROOFING

07 21 16 MINERAL FIBER BLANKET INSULATION

07 22 00 ROOF AND DECK INSULATION

07 24 00 EXTERIOR INSULATION AND FINISH SYSTEMS

07 27 10.00 10 BUILDING AIR BARRIER SYSTEM

07 41 13 METAL ROOF PANELS

07 60 00 FLASHING AND SHEET METAL

07 84 00 FIRESTOPPING

07 92 00 JOINT SEALANTS

DIVISION 08 - OPENINGS

08 11 13 STEEL DOORS AND FRAMES

08 11 16 ALUMINUM DOORS AND FRAMES

08 14 00 WOOD DOORS

08 34 02 BULLET-RESISTANT COMPONENTS

08 41 13 ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS

08 71 00 DOOR HARDWARE

08 81 00 GLAZING

DIVISION 09 - FINISHES

09 22 00 SUPPORTS FOR PLASTER AND GYPSUM BOARD

09 22 36 LATH

09 23 00 GYPSUM PLASTERING

09 23 82 FIREPROOF GYPSUM PLASTERING

09 29 00 GYPSUM BOARD

09 30 10 CERAMIC TILING

09 51 00 ACOUSTICAL CEILINGS

09 65 00 RESILIENT FLOORING

09 90 00 PAINTS AND COATINGS

DIVISION 10 - SPECIALTIES

10 11 00 VISUAL DISPLAY UNITS

10 14 00.10 EXTERIOR SIGNAGE

10 14 00.20 INTERIOR SIGNAGE

10 26 00 WALL AND DOOR PROTECTION

10 28 13 TOILET ACCESSORIES

10 44 16 FIRE EXTINGUISHERS

TABLE OF CONTENTS Page 3

DIVISION 12 - FURNISHINGS

12 24 13 ROLLER WINDOW SHADES

DIVISION 13 - SPECIAL CONSTRUCTION

13 34 19 PRE-ENGINEERED METAL CANOPY SYSTEMS

13 34 23 PREENGINEERED GUARD BOOTH STRUCTURES

13 48 00 SEISMIC BRACING FOR MISCELLANEOUS EQUIPMENT

DIVISION 22 - PLUMBING

22 00 00 PLUMBING, GENERAL PURPOSE

22 05 48.00 20 MECHANICAL SOUND, VIBRATION, AND SEISMIC CONTROL

DIVISION 23 - HEATING, VENTILATING, AND AIR CONDITIONING (HVAC)

23 03 00.00 20 BASIC MECHANICAL MATERIALS AND METHODS

23 05 48.19 SEISMIC BRACING FOR HVAC

23 05 93 TESTING, ADJUSTING, AND BALANCING FOR HVAC

23 07 00 THERMAL INSULATION FOR MECHANICAL SYSTEMS

23 23 00 REFRIGERANT PIPING

23 30 00 HVAC AIR DISTRIBUTION

23 81 00 DECENTRALIZED UNITARY HVAC EQUIPMENT

23 82 00.00 20 TERMINAL HEATING UNITS

DIVISION 25 - INTEGRATED AUTOMATION

25 05 11.00 CYBERSECURITY FOR FACILITY-RELATED CONTROL SYSTEMS - UMCS

25 05 11.01 CYBERSECURITY FOR FACILITY-RELATED CONTROL SYSTEMS - BCS

25 05 11.03 CYBERSECURITY FOR FACILITY-RELATED CONTROL SYSTEMS - IACS

25 10 10 UTILITY MONITORING AND CONTROL SYSTEM (UMCS) FRONT END

AND INTEGRATION

DIVISION 26 - ELECTRICAL

26 05 48.00 10 SEISMIC PROTECTION FOR ELECTRICAL EQUIPMENT

26 20 00 INTERIOR DISTRIBUTION SYSTEM

26 27 14.00 20 ELECTRICITY METERING

26 31 00 SOLAR PHOTOVOLTAIC (PV) COMPONENTS

26 32 13.00 20 SINGLE OPERATION GENERATOR SET

26 33 53 STATIC UNINTERRUPTIBLE POWER SUPPLY (UPS)

26 36 23 AUTOMATIC TRANSFER SWITCHES

26 41 00 LIGHTNING PROTECTION SYSTEM

26 51 00 INTERIOR LIGHTING

26 56 00 EXTERIOR LIGHTING

DIVISION 27 - COMMUNICATIONS

27 10 00 BUILDING TELECOMMUNICATIONS CABLING SYSTEM

DIVISION 31 - EARTHWORK

31 00 00 EARTHWORK

31 05 21 GEOGRID SOIL REINFORCEMENT

DIVISION 32 - EXTERIOR IMPROVEMENTS

TABLE OF CONTENTS Page 4

32 01 19.61 SEALING OF JOINTS IN RIGID PAVEMENT

32 05 33 LANDSCAPE ESTABLISHMENT

32 11 20 BASE COURSE FOR RIGID AND SUBBASES FOR FLEXIBLE PAVING

32 11 23 AGGREGATE BASE COURSES

32 12 13 BITUMINOUS TACK AND PRIME COATS

32 12 16.16 HOT-MIX ASPHALT (HMA) FOR ROADS

32 13 13.06 PORTLAND CEMENT CONCRETE PAVEMENT FOR ROADS

32 16 19 CONCRETE CURBS, GUTTERS AND SIDEWALKS

32 17 23 PAVEMENT MARKINGS

32 31 13.53 HIGH-SECURITY FENCES (CHAIN LINK AND ORNAMENTAL) AND GATES

32 92 19 SEEDING

32 92 19A AVIANO AB DESIGN GUIDE SEED TABLE

32 93 00 EXTERIOR PLANTS

DIVISION 33 - UTILITIES

33 11 00 WATER UTILITY DISTRIBUTION PIPING

33 30 00 SANITARY SEWERAGE

33 40 00 STORM DRAINAGE UTILITIES

33 71 02 UNDERGROUND ELECTRICAL DISTRIBUTION

33 82 00 TELECOMMUNICATIONS OUTSIDE PLANT (OSP)

DIVISION 34 - TRANSPORTATION

34 71 13.19 CRASH RATED ACTIVE VEHICLE BARRIERS AND CONTROLS

34 72 00.00 PASSIVE BOLLARD AND CABLE-BASED PASSIVE VEHICLE BARRIERS

DIVISION 46 – WATER AND WASTEWATER EQUIPMENT

46 25 14 COALESCING OR VERTICAL TUBE OIL-WATER SEPARATORS

-- End of Project Table of Contents --

D I V I S I O N 0 0

PROCUREMENT AND CONTRACTING

REQUIREMENTS

DOCUMENT 00 01 15

LIST OF DRAWINGS

02/11

04/05/2021

PART 1 GENERAL

1.1 SUMMARY

This section lists the drawings for the project pursuant to contract clause "DFARS 252.236-7001, Contract Drawings, Maps and Specifications."

1.2 CONTRACT DRAWINGS

Contract drawings are as follows:

DRAWING

NO.

REVISION

NO.

NAVFAC

Dr awi ng No.

TITLE

G-001 0 14090004 COVER SHEET

G-002 0 14090005 SHEET INDEX

G-101 0 14090006 OVERALL PROJECT PHASING PLAN

G-102 0 14090007 CONSTRUCTION PHASE 1A PLAN

G-103 0 14090008 CONSTRUCTION PHASE 1B PLAN

G-104 0 14090009 CONSTRUCTION PHASE 2 PLAN

G-105 0 14090010 CONSTRUCTION PHASE 3 PLAN

B-101 0 14090011 SUBSURFACE INVESTGATION PLAN

B-102 0 14090012 SOIL BORINGS LOG SHEET 1 OF 4

B-103 0 14090013 SOIL BORINGS LOG SHEET 2 OF 4

B-104 0 14090014 SOIL BORINGS LOG SHEET 3 OF 4

B-105 0 14090015 SOIL BORINGS LOG SHEET 4 OF 4

B-106 0 14090016 LABORATORY TEST RESULTS

C-001 0 14090017 CIVIL SYMBOLOGY

C-101 0 14090018 EXISTING CONDITIONS

C-102 0 14090019 GENERAL SITE DEMOLITION PLAN

DOCUMENT 00 01 15 Page 1

C-103 0 14090020 STORM DRAINAGE UTILITY DEMOLITION PLAN

C-104 0 14090021 SANITARY SEWER UTILITY DEMOLITION PLAN

C-105 0 14090022 WATER UTILITY DEMOLITION PLAN

C-106 0 14090023 NATURAL GAS UTILITY DEMOLITION PLAN

C-107 0 14090024 SITE PLAN

C-108 0 14090025 GEOMETRICS PLAN

C-109 0 14090026 GRADING AND DRIANAGE PLAN

C-110 0 14090027 CIVIL UTILITY PLAN

C-111 0 14090028 STORM SEWER UTILITY PLAN

C-112 0 14090029 SANITARY SEWER UTILITY PLAN

C-113 0 14090030 WATER UTILITY PLAN

C-114 0 14090031 TEMPORARY GATE 3 ACCESS POINT

C-115 0 14090032 CIVIL SIGNING PLAN

C-116 0 14090033 CIVIL PAVEMENT STRIPING PLAN

C-117 0 14090034 BID OPTION 2 - NORTH PARKING LOT

C-201 0 14090035 MAIN GATE PAVEMENT PROFILES

C-202 0 14090036 DRAINAGE PROFILES

C-203 0 14090037 DRAINAGE PROFILES CONT.

C-204 0 14090038 DRAINAGE PROFILES - CANOPY

C-205 0 14090039 PROFILES - CROSS BASIN CONNECTORS

C-206 0 14090040 SEWER PROFILES

C-207 0 14090041 WATER PROFILES

C-301 0 14090042 TYPICAL SECTIONS

C-302 0 14090043 TYPICAL SECTIONS

C-303 0 14090044 CROSS SECTIONS - ENTRANCE

C-304 0 14090045 CROSS SECTIONS - MAINLINE

C-305 0 14090046 CROSS SECTIONS - MAINLINE

DOCUMENT 00 01 15 Page 2

C-306 0 14090047 CROSS SECTIONS - MAINLINE

C-307 0 14090048 CROSS SECTIONS - MAINLINE

C-308 0 14090049 CROSS SECTIONS - MAINLINE

C-401 0 14090050 ENLARGED GEOMETRICS PLAN

C-402 0 14090051 AVB SITE PLAN

C-403 0 14090052 PCC ROAD PLAN

C-404 0 14090053 STORM WATER UTILITY PLAN

C-501 0 14090054 CIVIL DETAILS

C-502 0 14090055 CIVIL DETAILS

C-503 0 14090056 CIVIL DETAILS

C-504 0 14090057 CIVIL DETAILS

C-505 0 14090058 CIVIL DETAILS

C-506 0 14090059 CIVIL DETAILS

C-507 0 14090060 CIVIL DETAILS

C-508 0 14090061 CIVIL DETAILS

C-509 0 14090062 CIVIL DETAILS

C-510 0 14090063 CIVIL DETAILS

C-511 0 14090064 CIVIL DETAILS

C-512 0 14090065 CIVIL DETAILS

C-513 0 14090066 CIVIL DETAILS

C-514 0 14090067 CIVIL DETAILS

C-515 0 14090068 CIVIL DETAILS

C-516 0 14090069 CIVIL DETAILS

C-601 0 14090070 GRADING POINT TABLES

C-602 0 14090071 GRADING POINT TABLES 2

C-603 0 14090072 UTILITY STRUCTURE UPDATES

C-604 0 14090073 SIGNAGE LOCATION TABLE

DOCUMENT 00 01 15 Page 3

C-605 0 14090074 SIGNAGE SCHEDULE

C-606 0 14090075 CIVIL PAVEMENT STRIPING POINT TABLES

L-101 0 14090076 OVERALL LANDSCAPE SITE PLAN

L-501 0 14090077 LANDSCAPE DETAILS

LH501 0 14090078 HARDSCAPE DETAILS

S-001 0 14090079 GENERAL STRUCTURAL NOTES

S-002 0 14090080 GENERAL STRUCTURAL NOTES

S-003 0 14090081 GENERAL STRUCTURAL NOTES AND PLAN

LEGEND

S-501 0 14090082 TYPICAL STRUCTURAL CONCRETE DETAILS

S-502 0 14090083 TYPICAL STRUCTURAL CONCRETE DETAILS

S-503 0 14090084 TYPICAL STRUCTURAL CONCRETE DETAILS

S-504 0 14090085 TYPICAL STRUCTURAL CONCRETE DETAILS

S-505 0 14090086 TYPICAL STRUCTURAL FOUNDATION DETAILS

S-510 0 14090087 TYPICAL STRUCTURAL METAL DETAILS

SA101 0 14090088 FOUNDATION PLAN - ID CHECK CANOPY

SA501 0 14090089 DETAILS - ID CHECK CANOPY

SB101 0 14090090 FOUNDATION PLAN - GATEHOUSE

SB102 0 14090091 ROOF FRAMING PLAN - GATEHOUSE

SB501 0 14090092 SECTIONS AND DETAILS - GATEHOUSE

SB502 0 14090093 SECTIONS AND DETAILS - GATEHOUSE

SC101 0 14090094 FOUNDATION PLAN - SEARCH OFFICE

SC102 0 14090095 ROOF FRAMING PLAN - SEARCH OFFICE

SC501 0 14090096 SECTIONS AND DETAILS - SEARCH OFFICE

SC502 0 14090097 SECTIONS AND DETAILS - SEARCH OFFICE

SD101 0 14090098 FOUNDATION PLAN - OVERWATCH (BID

OPTION 3)

A-001 0 14090099 ARCHITECTURAL SYMBOLS, LEGENDS,

ABBREVIATIONS AND NOTES

A-101 0 14090100 DEMOLITION PLAN - EXISTING BUILDING

DOCUMENT 00 01 15 Page 4

A-102 0 14090101 DEMOLITION PLAN - EXISTING BUILDING 103

A-103 0 14090102 DEMOLITION PLAN - EXISTING BUILDING 104

A-104 0 14090103 DEMOLITION IMAGES

A-105 0 14090104 DEMOLITION PLAN - EXISTING BUILDING 106

A-106 0 14090105 DEMOLITION IMAGES

A-107 0 14090106 DEMOLITION IMAGES

A-108 0 14090107 DEMOLITION SCHEDULES

A-109 0 14090108 DEMOLITION SCHEDULES

A-501 0 14090109 WALL SCHEDULES

A-502 0 14090110 WALL SCHEDULES

A-503 0 14090111 WALL SCHEDULES

A-504 0 14090112 DETAILS

A-505 0 14090113 DETAILS

A-506 0 14090114 DETAILS

AA101 0 14090115 FLOOR PLAN - ID CHECK

AA102 0 14090116 ROOF PLAN - ID CHECK

AA103 0 14090117 REFLECTED CEILING PLAN - ID CHECK

AA201 0 14090118 BUILDING ELEVATIONS - ID CHECK

AA202 0 14090119 BUILDING ELEVATIONS - ID CHECK

AA301 0 14090120 SECTIONS - ID CHECK

AB101 0 14090121 FLOOR PLAN - GATEHOUSE

AB102 0 14090122 ROOF PLAN - GATEHOUSE

AB103 0 14090123 REFLECTED CEILING PLAN - GATEHOUSE

AB104 0 14090124 SIGNAGE PLAN - GATEHOUSE

AB201 0 14090125 BUILDING ELEVATIONS - GATEHOUSE

AB202 0 14090126 BUILDING ELEVATIONS - GATEHOUSE

AB301 0 14090127 BUILDING SECTIONS - GATEHOUSE

DOCUMENT 00 01 15 Page 5

AB302 0 14090128 WALL SECTIONS - GATEHOUSE

AB303 0 14090129 WALL SECTIONS - GATEHOUSE

AB401 0 14090130 ENLARGED VIEWS - GATEHOUSE

AB501 0 14090131 WINDOW ELEVATIONS - GATEHOUSE

AB502 0 14090132 WINDOW DETAILS - GATEHOUSE

AB503 0 14090133 DETAILS - GATEHOUSE

AB504 0 14090134 DETAILS - GATEHOUSE

AB601 0 14090135 DOOR SCHEDULE AND DETAILS - GATEHOUSE

AC101 0 14090136 FLOOR PLAN - SEARCH OFFICE

AC102 0 14090137 ROOF PLAN - SEARCH OFFICE

AC103 0 14090138 REFLECTED CEILING PLAN - SEARCH OFFICE

AC104 0 14090139 SIGNAGE PLAN - SEARCH OFFICE

AC201 0 14090140 BUILDING ELEVATIONS - SEARCH OFFICE

AC202 0 14090141 BUILDING ELEVATIONS - SEARCH OFFICE

AC301 0 14090142 BUILDING SECTIONS - SEARCH OFFICE

AC302 0 14090143 WALL SECTIONS - SEARCH OFFICE

AC501 0 14090144 DETAILS - SEARCH OFFICE

AC601 0 14090145 DOOR SCHEDULE AND DETAILS - SEARCH

OFFICE

AC602 0 14090146 WINDOW ELEVATIONS - SEARCH OFFICE

AD101 0 14090147 PLANS AND ELEVATIONS - OVERWATCH

IB101 0 14090148 INTERIOR FINISH PLAN AND SCHEDULES -

GATEHOUSE

IB102 0 14090149 INTERIOR FURNITURE PLAN - GATEHOUSE

IC101 0 14090150 INTERIOR FINISH PLAN AND SCHEDULES -

SEARCH OFFICE

IC102 0 14090151 INTERIOR FURNITURE PLAN - SEARCH OFFICE

ID101 0 14090152 INTERIOR PLANS AND SCHEDULES -

OVERWATCH

F-101 0 14090153 CODE COMPLIANCE SITE PLAN

FB100 0 14090154 CODE ANALYSIS - GATEHOUSE

DOCUMENT 00 01 15 Page 6

FB101 0 14090155 LIFE SAFETY PLAN - GATEHOUSE

FC100 0 14090156 CODE ANALYSIS - SEARCH OFFICE

FC101 0 14090157 LIFE SAFETY PLAN - SEARCH OFFICE

PB101 0 14090158 PLUMBING FLOOR PLAN

PB501 0 14090159 PLUMBING DETAILS

PB601 0 14090160 PLUMBING SCHEDULES

M-001 0 14090161 MECHANICAL LEGEND

M-002 0 14090162 MECHANICAL LEGEND

MB101 0 14090163 MECHANICAL FLOOR PLAN

MB501 0 14090164 MECHANICAL DETAILS

MB601 0 14090165 MECHANICAL SCHEDULES

MC101 0 14090166 MECHANICAL FLOOR PLAN - SEARCH OFFICE

E-001 0 14090167 ELECTRICAL LEGEND 1

E-002 0 14090168 ELECTRICAL LEGEND 2

E-003 0 14090169 SECURITY SYMBOLS, LEGENDS,

ABBREVIATIONS AND NOTES

E-101 0 14090170 TELECOMMUNICATIONS UTILITY DEMOLITION

PLAN

E-102 0 14090171 ELECTRICAL UTILITY DEMOLITION PLAN

E-103 0 14090172 ELECTRICAL & TELECOMMUNICATIONS DUCT

BANK PLAN

E-104 0 14090173 ELECTRICAL SITE LIGHTING PLAN

E-105 0 14090174 SECURITY SITE PLAN

E-501 0 14090175 POWER DIAGRAMS AND DETAILS

E-502 0 14090176 RISER DIAGRAM & GROUNDING DIAGRAM

E-503 0 14090177 PV SOLAR DETAILS

E-504 0 14090178 PV SOLAR DETAILS

E-505 0 14090179 ELECTRICAL DETAILS

E-506 0 14090180 TELECOMMUNICATION DETAILS

E-507 0 14090181 TELECOMMUNICATION DETAILS

DOCUMENT 00 01 15 Page 7

E-508 0 14090182 LIGHTNING PROTECTION DETAILS

E-509 0 14090183 SECURITY CAMERA DETAILS

E-510 0 14090184 SECURITY DETAILS

E-511 0 14090185 SECURITY DETAILS

E-512 0 14090186 SECURITY DETAILS

E-513 0 14090187 WEDGE GATE DETAIL

E-514 0 14090188 WEDGE GATE FOUNDATION DETAIL

E-601 0 14090189 LUMINAIRE SCHEDULES

E-602 0 14090190 PANEL SCHEDULES

E-603 0 14090191 PANEL SCHEDULES

E-604 0 14090192 SECURITY SINGLE LINE

EA101 0 14090193 LIGHTING PLAN - ID CHECK

EA102 0 14090194 POWER PLAN - ID CHECK

EA103 0 14090195 LIGHTNING PROTECTION PLAN - ID CHECK

EA104 0 14090196 PV SOLAR SITE PLAN - ID CHECK

EA105 0 14090197 TELECOMMUNICATION PLAN - ID CHECK

EA106 0 14090198 SECURITY FLOOR PLAN - ID CHECK

EB101 0 14090199 LIGHTING PLAN - GATEHOUSE

EB102 0 14090200 POWER PLAN - GATEHOUSE

EB103 0 14090201 LIGHTNING PROTECTION PLAN - GATEHOUSE

EB104 0 14090202 TELECOMMUNICATION PLAN - GATEHOUSE

EB105 0 14090203 SECURITY FLOOR PLAN - GATEHOUSE

EC101 0 14090204 LIGHTING PLAN - SEARCH OFFICE

EC102 0 14090205 POWER PLAN - SEARCH OFFICE

EC103 0 14090206 LIGHTNING PROTECTION PLAN - SEARCH

OFFICE

EC104 0 14090207 TELECOMMUNICATIONS PLAN - SEARCH OFFICE

EC105 0 14090208 SECURITY FLOOR PLAN - SEARCH OFFICE

DOCUMENT 00 01 15 Page 8

ED101 0 14090209 LIGHTING PLAN - OVERWATCH (BID OPTION

3)

ED102 0 14090210 POWER PLAN - OVERWATCH (BID OPTION 3)

ED103 0 14090211 TELECOMMUNICATIONS PLAN - OVERWATCH

(BID OPTION 3)

1.3 Boring Logs

The Government does not guarantee that borings or subsurface data indicate actual conditions, except for the exact locations and the time that they were made.

1.4 SUPPLEMENTAL ATTACHMENT - SITE PHOTOGRAPHS

Photographic documentation of the existing site and buildings specified for demolition is provided as supplemental information. The Government does not guarantee that the photographs indicate actual conditions, except for the exact locations and time that they were taken.

-- End of Document --

DOCUMENT 00 01 15 Page 9

THIS PAGE INTENTIONALLY LEFT BLANK

DOCUMENT 00 01 15 Page 10

DOCUMENT 00 73 04

SUPPLEMENTARY CONDITIONS FOR PROJECTS IN MEDITERRANEAN AREA

08/08

03/31/2021

PART 1 GENERAL

1.1 REFERENCES

The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.

ITALIAN LAWS AND DECREES (D.M.)

Law No.1086/1971 (11-3-1971) Norme per la disciplina delle opere di conglomerato cementizio armato, normale e precompresso ed a struttura metallica

D.M. 11-10-2017 (11-10-2017) Ministero dell'ambiente e della tutela del territorio e del mare - Criteri ambientali minimi per l’affidamento di servizi di progettazione e lavori per la nuova costruzione, ristrutturazione e manutenzione di edifici pubblici

D.L. No.106/2017 (16-06-2017) Adeguamento della normativa nazionale alle disposizioni del regolamento (UE) n. 305/2011, che fissa condizioni armonizzate per la commercializzazione dei prodotti da costruzione e che abroga la direttiva

89/106/CEE

D.L. No.50/2016 (18-04-2016) Codice degli appalti

D.P.C.M. 02-04-2015 (02-04-2015) Modalita' per l'individuazione di un modello unico di rilevamento e potenziamento della rete di monitoraggio e di prevenzione del rischio sismico per la predisposizione del piano di messa in sicurezza degli edifici scolastici

D.L. 26-06-2015 (26-06-2015) Applicazione delle metodologie di calcolo delle prestazioni energetiche e definizione delle prescrizioni e dei requisiti minimi degli edifici

D.M. 11-04-2013 (11-04-2013) Norme tecniche-quadro, contenenti gli indici minimi e massimi di funzionalita' urbanistica, edilizia, anche con riferimento alle tecnologie in materia di efficienza e risparmio energetico e

DOCUMENT 00 73 04 Page 1 produzione da fonti energetiche rinnovabili, e didattica indispensabili a garantire indirizzi progettuali di riferimento adeguati e omogenei sul territorio nazionale. Linee Guida

D.L. No.1/2012 (24-01-2012) Disposizioni urgenti per la concorrenza, lo sviluppo delle infrastrutture e la competitivita'

D.L. No.5/2012 (09-02-2012) Disposizioni urgenti in materia di semplificazione e di sviluppo

D.M. 07-08-2012 (07-08-2012) Disposizioni relative alle modalità di presentazione delle istanze con-cernenti i procedimenti di prevenzione incendi e alla documentazione da allegare, ai sensi dell'ar-ticolo 2, comma 7, del decreto del Presidente della Repubblica 1° agosto 2011, n. 151

D.P.R. No.177/2011 (14-09-2011) Regolamento recante norme per la qualificazione delle imprese e dei lavoratori autonomi operanti in ambienti sospetti di inquinamento o confinanti, a norma dell'articolo 6, comma 8, lettera g), del decreto legislativo 9 aprile 2008,

n. 81

D.P.R. No.151/2011 (01-08-2011) Regolamento recante semplificazione della disciplina dei procedimenti relativi alla prevenzione degli incendi, a norma dell'articolo 49, comma 4-quater, del decreto-legge 31 maggio 2010, n. 78, convertito, con modificazioni, dalla legge 30 luglio 2010,

n. 122

D.L. No.28/2011 (03-03-2011) Attuazione della direttiva 2009/28/CE sulla promozione dell'uso dell'energia da fonti rinnovabili

LAW No.9/2009 (18-02-2009) Conversione in legge, con modificazioni, del decreto-legge 22 dicembre 2008, n. 200, recante misure urgenti in materia di semplificazione normativa

D.M. 26-6-2009 (26-06-2009) Linee guida nazionali per la certificazione energetica degli edifici

D.L. No.106/2009 (03-08-2009) Disposizioni integrative e correttive del decreto legislativo 9 aprile 2008, n. 81, in materia di tutela della salute e della sicurezza nei luoghi di lavoro

D.M. 14.01.2008 (14-01-2008) Approvazione delle nuove norme tecniche per le costruzioni

DOCUMENT 00 73 04 Page 2

D.M. No.37/2008 (22-01-2008) Regolamento concernente l'attuazione dell'articolo 11-quaterdecies, comma 13, lettera a) della legge n. 248 del 2005, recante riordino delle disposizioni in materia di attività di installazione degli impianti all'interno degli edifici

D.L. No.81/2008 (09-04-2008) Attuazione dell'articolo 1 della legge 3 agosto 2007, n. 123, in materia di tutela della salute e della sicurezza nei luoghi di lavoro

D.L. No.115/2008 (30-05-2008) Attuazione della direttiva 2006/32/CE relativa all'efficienza degli usi finali dell'energia e i servizi energetici e abrogazione della direttiva

93/76/CEE

D.M. 16-02-2007 (16-02-2007) Classificazione di resistenza al fuoco di prodotti ed elementi costruttivi di opere da costruzione

Law No.17/2007 (26-02-2007) Conversione del decreto-legge 28 dicembre 2006, n. 300.

Proroga di termini previsti da disposizioni legislative. Disposizioni di delegazione legislativa e disposizioni diverse

D.M. 09-03-2007 (09-03-2007) Prestazioni di resistenza al fuoco delle costruzioni nelle attività soggette al controllo del Corpo nazionale dei vigili del fuoco

D.L. No.152/2006 (03-04-2006) Norme in materia ambientale

Directive 2006/32/CE (05-04-2006) Efficienza degli usi finali dell'energia e i servizi energetici e recante abrogazione della direttiva 93/76/CEE del Consiglio

D.L. No.192/2005 (19-08-2005) Attuazione della direttiva 2002/91/CE relativa al rendimento energetico nell'edilizia

D.L. 18 aprile 2019, n.32 Disposizioni urgenti per il rilancio del settore dei contratti pubblici, per l'accelerazione degli interventi infrastrutturali, di rigenerazione urbana e di ricostruzione a seguito di eventi sismici.

D.L. No.28/2001 (03-03-2001) Attuazione della direttiva 2009/28/CE sulla promozione dell'uso dell'energia da fonti rinnovabili, recante modifica e successiva abrogazione delle direttive 2001/77/CE e 2003/30/CE

DOCUMENT 00 73 04 Page 3

D.L. No.93/2000 (25-02-2000) Attuazione della direttiva 97/23/CE in materia di attrezzature a pressione.

D.L. No.241/2000 (26-05-2000) Attuazione della direttiva 96/29/EURATOM in materia di protezione sanitaria della popolazione e dei lavoratori contro i rischi derivanti dalle radiazioni ionizzanti

D.P.R. No.551/1999 (21-12-1999) Regolamento recante modifiche al d.P.R. 26 agosto 1993, n. 412, in materia di progettazione, installazione, esercizio e manutenzione degli impianti termici degli edifici, ai fini del contenimento dei consumi di energia.

D.M. 10-03-1998 (10-03-1998) Criteri generali di sicurezza antincendio e per la gestione dell'emergenza nei luoghi di lavoro

D.M. 16-03-1998 (16-03-1998) Tecniche di rilevamento e di misurazione dell'inquinamento acustico

D.P.C.M. 14-11-1997 (14-11-1997) Determinazione dei valori limite delle sorgenti sonore

D.P.C.M. 5-12-1997 (05-12-1997) Requisiti acustici passivi degli edifici

Law No.23/1997 (11-01-1996) Norme per l'edilizia scolastica

D.P.C.M. 11-12-1996 (11-12-1996) Applicazione del criterio differenziale per gli impianti a ciclo produttivo continuo

Law No.447/1995 (26-10-1995) Legge quadro sull'inquinamento acustico

D.M. August 26, 1992 (26-08-1992) Norme di prevenzione incendi per l'edilizia scolastica

Law No.10/1991 (09-01-1991) Norme per l'attuazione del Piano energetico nazionale in materia di uso nazionale dell'energia, di risparmio energetico e di sviluppo delle fonti rinnovabili di energia

D.P.C.M. 1 March 1991 (01-03-1991) Limiti massimi di esposizione al rumore negli ambienti abitativi e nell' ambiente esterno

D.M. 18-12-1975 (18-12-1975) Norme tecniche aggiornate relative all'edilizia scolastica, ivi compresi gli indici di funzionalità didattica, edilizia ed urbanistica, da

DOCUMENT 00 73 04 Page 4 osservarsi nella esecuzione di opere di edilizia scolastica

Law No.1086/1971 (11-3-1971) Norme per la disciplina delle opere di conglomerato cementizio armato, normale e precompresso ed a struttura metallica

Law No.186/1968 (01-03-1968) Disposizioni concernenti la produzione di materiali, apparecchiature, macchinari, installazioni e impianti elettrici ed elettronici

D.P.R. No.1288/1967 (24-10-1967) Regolamento per l'esecuzione della legge 13 luglio 1966, n. 615, recante provvedimenti contro l'inquinamento atmosferico, limitatamente al settore degli impianti termici

D.P.R. No.1497/1963 (29-05-1963) Approvazione del regolamento per gli ascensori ed i montacarichi in servizio privato

1.2 SUBMITTALS

Government approval is required for submittals with a "G" designation;

submittals not having a "G" designation are for Contractor Quality Control approval. Submittals with an "S" are for inclusion in the Sustainability eNotebook, in conformance to Section 01 33 29 SUSTAINABILITY REPORTING.

Submit the following in accordance with Section 01 33 00 SUBMITTAL

PROCEDURES:

SD-01 Preconstruction Submittals

Contractor Employee Base Access Pass; G

Chamber of Commerce Certificate of Membership; G

Family Status and Residency Certificate; G

Contractor Personnel Identification; G

SD-11 Closeout Submittals

Certificate of Compliance for All Contract Work; G

Certified Credentials of Proposed Testing Personnel; G

Certification of the Static Load Tests Results; G

Certification of Actual Testing Personnel; G

Certificate of Conformity for Electrical System; G

Certificate of Compliance for Fire Prevention System; G

DOCUMENT 00 73 04 Page 5

1.3 PUBLIC RELEASE OF INFORMATION

1.3.1 Prohibition

There shall be no public release of information or photographs concerning any aspect of the materials or services relating to this bid, contract, or purchase order or other documents resulting therefrom without the prior written approval of the Contracting Officer.

1.3.2 Subcontracts and Purchase Orders

The Contractor agrees to insert the substance of above paragraph "Prohibition" in each subcontract and purchase order generated for this contract.

1.4 ENGLISH SPEAKING REPRESENTATIVE

At all times when any performance of the work at the site is being conducted by any employee of the Contractor or his subcontractors, the Contractor shall have a representative present on the site who is capable of explaining the work operations and receiving instructions in the English language. The Contracting Officer shall have the right to determine without appeal of such decision, whether the proposed representative has sufficient technical and lingual capabilities and the Contractor shall immediately replace any individual not acceptable to the Contracting Officer. The Construction Contractor's qualified Project Manager, on-site Superintendent, Quality Control Manager, and Quality Control Specialist shall be fluent (can read, speak, and write) in both English and Italian languages.

1.5 NORMS AND LAWS

In case of differences between project specifications or the accompanying drawings and referenced norms and laws, norms and laws shall govern. In case of differences between project specifications and the accompanying drawings, the specifications shall govern.

1.6 INDUSTRY STANDARDS

When both U.S. and European, or Italian, Industry Standards are applicable to this project and the standards are in conflict with each other, the most stringent of the industry shall govern.

1.7 PROHIBITED ITEMS

Use of the following items in this construction project is prohibited:

a. Use of aluminum for electrical conductors.

b. Embedding aluminum conduit in concrete.

c. Use of fluorescent light ballasts and other products containing PCB's.

d. Use of urea-formaldehyde foam insulation products.

e. Use of any paint/coatings having a lead content of over 0.06 percent by weight of non-volatile content. The use of ozone depleting chemicals is prohibited. The use of zinc-chromate is prohibited.

DOCUMENT 00 73 04 Page 6

f. The use of materials containing asbestos is prohibited.

1.8 PROPRIETARY NAMES

Manufacturer's proprietary names indicated for colors, textures and patterns of materials are for the purpose of color, texture and pattern selection only. Other manufacturers materials are acceptable and provided they closely approximate colors, textures and patterns indicated and provided they conform to all other requirements subject to Contracting Officer's approval.

1.9 SUBMITTAL OF PROOF OF QUALIFICATIONS AND EXPERIENCE

Where qualifications or experience requirements are set forth in the specifications with respect to equipment and equipment installers, written proof of such qualifications or experience must be provided within thirty

(30) calendar days after Contract award, and before placing any order for such equipment or before dispatching equipment installers to the project site.

1.10 ORAL MODIFICATION

No oral statement of any person other than the Contracting Officer as provided in the clause in this Contract entitled FAR 52.243-4 Changes shall in any manner or degree modify or otherwise affect the terms of this Contract.

1.11 NO WAIVER BY GOVERNMENT

The failure of the Government, in any one or more instances, to insist upon the strict performance of any of the terms of this Contract or to exercise any option herein conferred shall not be construed as a waiver or relinquishment to any extent of the right to assert or rely upon such terms or option on any future occasion.

1.12 PRODUCTS SPECIFIED USING USA STANDARDS

1.12.1 Local Products Specified Using United States of America (USA) Standards

There are locally available products specified in this contract that meet USA standards. "Locally available products that meet USA standards" are defined as:

a. "Products that meet the referenced USA standards, and are manufactured and distributed in-country, or manufactured and distributed in the European Union, and are readily available locally from in-country sources or from the European Union sources"; or

b. "Products manufactured in the USA and distributed in-country or in the European Union or in the USA, and are readily available locally from in-country sources or from the European Union sources, or from USA sources.".

1.12.2 USA Manufactured Products Specified Using USA Standards

There are products to be provided in this contract that are not readily available locally and must be manufactured in the United States of America (USA) and in compliance with USA standards. Products manufactured in

DOCUMENT 00 73 04 Page 7 another country are considered USA manufactured, if the manufacturers or suppliers are under license by USA manufacturers and the products meet the same applicable specifications and standards. The products are specified in the technical sections listed below:

Section 34 71 13.19 CRASH RATED ACTIVE VEHICLE BARRIERS AND CONTROLS

1.12.3 Consignment, Marking, and Customs Clearance

In order for the Contractor to be exempt from paying duty on material or equipment to be imported for incorporation into the contract work, all shipments shall be consigned to the OICC/ROICC and marked for the contract by contract number. Additionally, the Contractor shall supply to the OICC/ROICC with certified copies of the confirmed material/equipment orders and invoices in order that the duty free customs clearance may be accomplished. Failure on the part of the Contractor to comply with the requirements herein will not be grounds for non-enforcement of the provisions of the Clause, "Taxes" of the Contract Clauses.

1.12.4 Excess

The Contractor shall furnish to the Contracting Officer, just prior to completion of this contract, a consolidated inventory of all excess supplies, materials, and equipment imported duty free for use under this contract. The Contract shall either pay required duties on the excesses or re-export the excesses.

1.13 FINAL GOVERNING STANDARDS (FGS)

Final Governing Standards (FGS) for environmental protection at DOD installations and facilities in Italy went into effect June 1994. These standards were developed by comparing and adopting the more protective requirements of the Overseas Environmental Baseline Guidance Document (OEBGD), European Union and national, regional, and local environmental laws and regulations. The FGS are applicable to work under this contract. The FGS (both English and local language versions) may be reviewed at the ROICC Office during normal business hours.

1.14 SECURITY REQUIREMENTS

The Contractor shall be responsible for furnishing each employee, and for requiring that each employee engaged in the project, display such identification as may be approved and directed by the Contracting Officer.

Every employee of the prime contractor, all subcontractor employees, and all material suppliers' employees, who require access to the base for any reason and for any length of time will be required to obtain a.

1.14.1 SECURITY REQUIREMENTS

The Contractor shall be responsible for furnishing each employee, and for requiring that each employee engaged in the work display, such identification as may be approved and directed by the Contracting Officer. All prescribed identification shall immediately be delivered to the Contracting Officer for cancellation upon release of any employee.

Contractor personnel identification, including names and photographs, D.N.I. (Documento Nacional de Identidad) numbers, vehicles identification and license plate numbers, of all personnel to be employed in the

DOCUMENT 00 73 04 Page 8 performance of the work at the site, shall be submitted to the Contracting Officer at least seven (7) days prior to commencement of the work.

Contractor personnel shall be restricted from entering operational buildings or areas without the specific authorization of the Contracting Officer.

Procedures for obtaining Contractor Employee Base Access Pass are provided as an attachment, VISITOR CONTROL CENTER, which is included at the end of this section.

1.15 ANTI-MAFIA LAW

1.15.1 Pre-Award Effect of Anti-Mafia Procedures

Inasmuch as the work of this solicitation is to be performed on land owned by the Italian State, the prospective contractor will be subject to Italian Law No. 646, of 13 September 1982, and subsequent integrations and amendments. The solicitation data will be made available only to firms that meet the related submittal requirements below in paragraph "Submittals". As such, in the event that prior to award any disciplinary actions or proceedings for Mafia related matters exist against the apparent low bidder, no award will be made to said low bidder.

1.15.2 Termination Under Italian Law No. 646 (Anti-Mafia)

If during the life of this contract, any proceeding or disciplinary actions contemplated by Italian Law No. 646 of 13 September 1982 (and subsequent amendments and integrations) is undertaken against any component of the Contractor or any Subcontractor, the Government can consider this a failure to execute the work and terminate the contractor's right to proceed with the work under the "Default" clause of this contract.

1.15.3 Application of Italian Law No. 646 (Anti-Mafia) to Subcontractors

In addition to the requirement in FAR 52.244-2 Subcontracts, of this contract, before the Contracting Officer can consent to any subcontractors, the Contractor will be required to certify to the Contracting Officer that no disciplinary actions or proceedings for Mafia related matters exist against such Subcontractors.

1.15.4 Documentation Requirements

Contractor shall submit the following:

a. An original, unexpired and not older than 10 months at the time of the bid opening, of the Chamber of Commerce Certificate of Membership (Certificato di iscrizione alla Camera di Commercio).

b. Originals, unexpired and not older than one month at the time of the bid opening, of the Family Status and Residency Certificate of each member of the firm, as listed in the Chamber of Commerce Certificate of Membership (Per Decreto Legislativo n. 490 of 8 Aug 94, published in the Gazzetta Ufficiale n. 186 of 10 Aug 1994).

DOCUMENT 00 73 04 Page 9

1.16 CERTIFICATION OF COMPLIANCE WITH ITALIAN LAWS

1.16.1 Certification

As a condition of final acceptance of the work, the Contractor shall submit to the Contracting Officer a certificate of compliance for all contract workcertifying that the work complies with Italian Law D.M. 37 and that the provided work is adequate and safe for the designated use.

The certification shall be made by the responsible technician of the installation firm who shall have been regularly registered on the Installation National Professional Rolls of Italy for at least the last three years.

1.16.2 Static Load and Final Testing

The Contractor shall comply with the pertinent articles of Italian LAW No. 1086 . Because this construction will be performed on property owned by the Italian State, the LAW No. 1086 Articles pertaining to notification and participation by civil authorities are not applicable.

The Contractor shall be fully responsible for construction, supervision, static load tests, and final testing, and for all costs associated with this procedure and specifically follow Article 7 of Italian LAW No. 1086 in performing the test. Any fees for these tests shall be in accordance with Italian Professional Law No. 143 of 2 March 1949 as amended.

Article 2 of Italian LAW No. 1086 and D.P.R. 380 requires the static load tests to be performed under the supervision of an engineer or architect registered on the National Professional Verifier Rolls of Italy.

Since GENIODIFE intends to participate in static load and final testing, the Contractor shall notify the Contracting Officer at least 21 calendar days prior to any static load or final test to enable the Contracting Officer to notify GENIODIFE.

Prior to performing the tests, submit to the Contracting Officer the names and certified credentials of proposed testing personnel, engineer(s) or architects(s) they propose to perform the static load testing.

Upon completion of the tests, the Contractor shall submit to the Contracting Officer two original certification of the static load tests results of the static load tests together with a certification of actual testing personnel stating that each test was performed by the same engineer(s) or architects(s) whose certified credentials were previously submitted. The Contracting Officer will submit one original certification to GENIODIFE.

1.16.3 Other Tests

In addition to the certifications listed above, the Contractor shall provide with all other certifications and testing required by Italian Law. The Contractor is also responsible for all permits required by Italian Law (See Contract Clause FAR 52.236-7 Permits and Responsibilities. The Contractor shall submit to the Contracting Officer two originals of each certification required by Italian Law. Such certifications may include but not be limited by the following as applicable to the project:

a. Certificate of conformity for electrical system in accordance with

DOCUMENT 00 73 04 Page 10

Italian D.M. 37 and Law 17 .

b. Certificate of compliance for fire prevention system in accordance with DM 16 February 1982 and UFC 3-600-01.

1.17 OPTIONAL PURCHASE

All materials and equipment not specifically required to be purchased in the United States of America shall be purchased in Italy and may not be purchased elsewhere without specific written approval of the Contracting Officer. If purchase of material and equipment is not feasible in Italy or it is specified that material and equipment be purchased in the United States, the Clause, "STATUS OF CONTRACTOR AS DIRECT CONTRACTOR" of this Section, will apply.

1.18 SECURITY REQUIREMENTS

The Contractor shall be responsible for furnishing each employee, and for requiring that each employee engaged in the work display, such identification as may be approved and directed by the Contracting Officer. All prescribed identification shall immediately be delivered to the Contracting Officer for cancellation upon release of any employee.

Contractor personnel identification, including names and photographs, D.N.I. (Documento Nacional de Identidad) numbers, vehicles identification and license plate numbers, of all personnel to be employed in the performance of the work at the site, shall be submitted to the Contracting Officer at least seven (7) days prior to commencement of the work.

Contractor personnel shall be restricted from entering operational buildings or areas without the specific authorization of the Contracting Officer.

PART 2 PRODUCTS

Not Used

PART 3 EXECUTION

Not Used

-- End of Document --

DOCUMENT 00 73 04 Page 11

DOCUMENT 00 73 04 Page 12

VISITOR CONTROL CENTER

TABLE OF CONTENTS

Section I Responsibilities and definitions

Section II

AVIANO AIR BASE ENTRY POLICY

(With respect to all Aviano Base Entry Passes)

Section III Contractor base entry pass procedures for Aviano Air Base

Section IV Lost permanent/temporary/escort required passes

Section V Request For Base Entry

Section VI (ATTACHMENT 4) How to complete the Aviano Form 79 for Employees

Section VII Request for Local National passes without escort privileges

Section VIII Request for Local National passes escort with privileges

Section IX (ATTACHMENT 6) TRENTECH PASSES (Max time allotted for each pass issued)

Section X Non-European and European Countries

Miscellaneous (Attachments) Application Roster Aviano Form 79 Cover Letter Escort Cover Letter

VISITOR CONTROL CENTER

Section I

RESPONSIBILITIES:

1. LOGISTICS SUPPORT. Requests for additional needed support will be routed through the applicable agency for coordination and approval. The 31 SFS will be the POC for any additional support requested.

2. MANPOWER.

31 SFS will: Provide a minimum of 1 body to issue base passes at the VCC Monday- Friday during hours of operation.

3. GENERAL. Each sponsor (agency/unit) will retrieve the worker’s TREN TECH, Aviano Entry Base Pass upon termination of his or her employment if it occurs prior to the contract expiration date or when contract expires and return the pass to the VCC.

AGREEMENT AND ADMINISTRATION. These procedures will be effective immediately, procedures can be modified and revised whenever deemed necessary.

DEFINE:

3-DAY PASSES ARE PASSES ISSUED TO INDIVIDUALS PRIOR TO TURNING IN

AN AVIANO FORM 79, AFTER THE 3RD DAY NO MORE DAYS WILL BE ISSUED

UNTIL THEY HAVE SUBMITTED AN AVIANO FORM 79. IF AN AVIANO FORM

79 IS NOT SUBMITTED NO MORE DAYS WILL BE ALLOWED.

TEMPORARY PASSES ARE 15-DAY PASSES ISSUED TO INDIVIDUALS WHO

HAVE BROUGHT IN AN AVIANO FORM 79, AND ARE CURRENTLY AWAITING

THE CARABINARI BACKGROUND CHECK. THESE INDIVIDUALS ARE

REQUIRED TO HAVE A REQUEST ON FILE AT THE VCC AT THE TIME OF

ISSUE, HOWEVER IT IS RECOMMENDED THAT THE INDIVIDUAL SUBMIT

THE AVIANO FORM 79 21 DAYS PRIOR TO THE EXPIRATION DATE OF THE

PERMANENT PASS, OR THE DATE FOR WHICH THE PERSON MUST START

WORK ON THE BASE.

AVIANO BASE ENTRY PASS IS A PERMANET PASS ISSUED TO WORKERS

WHO HAVE SUBMITTED AN AVIANO FORM 79 (MAR 2002) AND HAS HAD A

BACKGROUND CHECK IN THE LAST TWELVE

MONTHS.

TRENTECH PASSES ARE A LOCAL COMPUTER GENERATED PLASTIC

IDENTIFICATION CARD ISSUED TO CONSTRUCTION WORKERS,

CONTRACTORS,

LN EMPLOYEES, AND VISITORS.(REF. 31-201 SEC 2.2.3.10.1 MAY 2003)

Section II

AVIANO AIR BASE ENTRY POLICY

(With respect to all Aviano Base Entry Passes)

Starting immediately, anyone possessing a valid Aviano Base Entry Pass with the title of LN Employee, Contractor, Honored Guest, Golf Pass or Visitor, may enter the Flight line area (if authorized on the pass) by either Gate 7 or Gate 8.

All of the yellow, USAFE Form 77 will use either gate 7 or Gate 8.

Anyone possessing a valid Aviano Base Entry Pass with the title Construction at the top of the badge may only enter the base through Gate 10.

Any construction worker who still posses the old Aviano 77, must still only access the base through Gate 10. They cannot enter through Gate 7 unless they have been designated in writing or allowed on the pass.

Anyone driving a large vehicle is required to be searched and must enter through Gate

10. Or process through Gate 10 if proceeding up to any other Aviano Area (i.e. A1, A2.

Area C, E, F, G)

NOTE: No construction/contractor, local national, visitor are authorized unescorted entry to area G. No one is issued area G at the VCC.

**All personal being escorted and fall under the category of construction/contactor must enter through Gate 10 to keep accurate accountability of all personal entering the installation. These people must visit the VCC if they are working in any part of the installation (1,2,C, E, F, D, G). All military and DOD personal escorting workers must accompany these People to the VCC if they are entering the installation for work purposes. **

Section III

CONTRACTOR BASE ENTRY PASS PROCEDURES FOR AVIANO AIR BASE

PURPOSE: The purpose of this document is to outline responsibilities and requirements for construction/contractors to obtain a base entry pass at Aviano Air Base.

AUTHORITY: Aviano Instruction 31-101, and Article 20 from the Decree from the President of the Republic of Italy dated 8 Jul 1977 n.751, Approval of Specifications For Contractor Laborers at Department of Defense, which says that “Whenever military authority requires, contractors will have to substitute one or more workers immediately, without opposing any objections or requiring compensation. The military authority can deny access of un-welcomed workers to their working area.”

SCOPE: This document provides guidance and agreement on procedures required to obtain base entry passes for construction/contractors working at Aviano Air Base.

Actions and agreements herein apply only to the participating parties and are not intended to supersede existing regulations or agreements.

INITIAL AND FINAL ADMINISTRATIVE PROCESSING:

Entry to Aviano Air Base requires verification of identity prior to entry. The sponsor (government agency/unit) will use the following procedures to request base access for construction/contractors working at Aviano Air Base.

NOTE: One time worker(s) not affiliated with the base (i.e. Italian Government Officials inspecting a site) can be issued a paper AF Form 75 and must be escorted while on base. These individuals must provide an original, valid, official form of Identification (i.e. ID, Drivers Liscence or Passport). If the workers are waiting for a Soggiorno then they must provide a Soggiorno receipt(s) along with photo identification at the Visitor Control Center (VCC) at Gate 10. One time worker(s) who will be receiving Temporary Passes that are Non European must present one of the following identifications Carta Di Identita, Patente, Passport, and a Permesso Di Soggiorno (or show proof that the Soggiorno has been applied for, i.e. Soggiorno Receipt). Italian Military escorting Non EU’ s are authorized to escort workers whom do not have Soggiorno’s. If soggiornos are not presented at the time when entry is requested, then the individual will be denied entry on to the installation.

EXCEPTION Americans are not required to have a soggiorno if working <90 days.

15-Day Temporary Passes are issued to workers who will be working permanently on the installation. Workers that are issued a 15day Temporary Pass will be subject to a complete a background check. Once their Temporary Pass is expired, workers can be issued the Tren-Tech/Aviano Entry Base Pass only if the Aviano Form79 request has been cleared by the Carabiniari. The person only needs to go through a background check once every 12 months. If the person has been subject to a background check within the last 12 months, the contracting agency just needs to turn in a new pass application (SF must account for all passes issued, or Co/government agency/unit must have control of the pass, old pass must be brought in for the exchange of the new). Individuals renewing their passes must wait 15 days, if they have not had a background check completed within the last 12 months. 3-Day passes will not be issued to individuals who are renewing a pass. The form 79 must be submitted prior to the expiration of their pass.

The company/organization is responsible to update Aviano Form 79request (Co/government agency/unit is responsible for knowing when pass are expiring).

NOTE: It is required that the sponsor submit an AVIANO 79 during the issuance of the 3-DAY PASS (AF Form 75).

EXCEPTION: When Non EU’s have exhausted their TEMPORARY PASS, and the Aviano Form 79 is still awaiting approval they can be reissued another Temporary Pass for an additional 15days until the Aviano Form 79 is ready.

NOTE: (TEMPORAY PASS ENTRY/EXIT PROCEDURES): After receiving a TEMP PASS, or 3-DAY PASS(contractor/construction pass), the individual(s) will be escorted to their designated work site and will be under escort (by contractors or sponsors with escort authority) until the end of their duty day. The escort must accompany the worker(s) when entering/exiting the installation at all times. If the escort loses control of a worker, the escort will lose escort privileges and the worker(s) violating the procedure will be all immediately escorted off base and barred from the installation.

Section IV

IF PERSON LOST PERMANENT PASS/ TEMPORARY PASS/ESCORT

REQUI…