Att. 03 - FedSpec O-I-1279B.pdf
PDF 2 MB Posted
- Solicitation number
- N0016426Q0004
About this file
This document is a Federal Specification for Ion Exchange Resins (O-I-1279B), dated June 30, 1993, superseding a previous version from November 24, 1980. The specification covers synthetic styrene-divnylbenzene organic and cation exchange resins used to demineralize or treat water by replacing negative or positive ions. The document defines three classes of ion exchange resins:
Class 1 - Sulfonate cross-linked styrene-divinylbenzene cation exchange resin in hydrogen form
Class 2 - Trimethylamine type styrene-divinylbenzene quaternary anion exchange resin in hydroxide form
Class 3 - Mixed bed resin combining a hydrogen form cation resin and hydroxide form anion resin
The specification provides detailed technical requirements for each resin class, including solids percentage, particle size, salt-splitting capacity, impurity limits, and testing procedures. It also includes packaging specifications, requiring resins to be furnished in 1-cubic-foot quantities in double polyethylene bags, with specific marking and preservation instructions. The document is intended for use by all Federal agencies and was prepared by the Naval Sea Systems Command with GSA-FSS as the civil agency coordinating activity.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Exhibit A - CDRLs_12.3.25.pdf | ||
| N0016426Q0004_Amendment_0003.pdf | ||
| N0016426Q0004_Amendment_0002.pdf | ||
| N0016426Q0004_Amendment_0001.pdf | ||
| PricingMatrix Rev.4_amendment 0001.pdf | ||
| Att. 02 - Pricing Matrix Template.REV3 .docx | DOCX document | |
| SF 1449 - N0016426Q0004.pdf | ||
| Att. 01 - Dwg 166-3S.pdf | ||
| Exhibit A - CDRLs.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SALIENT CHARACTERISTICS
CLIN 4 Salient Characteristics (DFN10-30-AN):
10 micron filtration and 90 percent minimum efficiency 2-3/5 inch diameter (nominal) 30 inch length (nominal) Core Material is 304 stainless Gasket/O-ring material is Buna N Minimum operating temperature is 250 deg. C Minimum operating differential pressure is 75 psid Fully compatible for high purity water
CLIN 5, 6 Salient Characteristics (279-20-033/200-20-3):
Absolute remove of Brevundimonas diminuta bacteria
0.2 micron filtration 20 inch length (nominal)
2.9 inch diameter SOE flat, closed end External 222 Polyurethane O-ring seals Polypropylene case and end caps Fully compatible for high purity water
CLIN 7 Salient Characteristics (Norgren P/N 3161-16):
5 micron polypropylene filter element Must fit Norgren F55-201-L0DA oil removal filter housing
CLIN 8 Salient Characteristics (Norgren P/N 5349-05):
Coalescing filter element Must fit Norgren F08-200-A3DA coalescing filter housing
CLIN 9, 10 Salient Characteristics Purolite P/N A310LC**
CLIN 11, 12 Salient Characteristics Purolite P/N UCW9964**
CLIN 13 Calgon Carbon P/N CPG LF 12x40**
**CLIN 9, 10, 11, 12, 13 resins are for ultra-pure water. For this reason the resins cannot be substituted. Other resins have been used in the past, no others resins match the performance to these specific resins (CLIN 9, 10, 11, 12)
CLIN 14, 15 Salient Characteristics Watts P/N M6724583 Must fit a Mueller 6", 851MM Y-STRAINER 304 or 316 Stainless Steel 6 in diameter 1/8 in diameter perforation
CLIN 16 Salient Characteristics (Mueller Steam Specialty P/N S-2.0-1205-B-6-I-0-0):
Must fit a Mueller 2", 851MM Y-STRAINER 304 or 316 Stainless Steel 2 inch diameter
0.045 inch diameter perforation
| TAB 5 - Federal Spec O-I-1279B |
| TAB 5 - LL7000 Mechanical Schematic Dwg |
| TAB 5 - SALIENT CHARACTERISTICS - 07172020 |
File details come from the government source that posted it. Updated .