Att_2_WBM Spec Response Matrix DRAFT.xlsx
XLSX spreadsheet 55 KB Posted
- Attached to
- Workboat Medium Draft RFP
- Solicitation number
- N0002421R2255
About this file
This attachment is a specification response matrix for a draft solicitation seeking workboats. The Navy seeks an estimated fifty-five Commander, Naval Installation Command Workboat Mediums over eight years through a firm fixed price indefinite delivery/indefinite quantity contract with a single awardee determined by lowest price technically acceptable. The small business set-aside procurement is conducted according to Federal Acquisition Regulation Part 12 for commercial items under North American Industry Classification System code 336612. Offerors must fill out the matrix specifying hull dimensions, capacities, performance characteristics and structural methodology for review against requirements. Exceptions require rationale in an offeror's notes section for government evaluation.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| N0002421R2255 Workboat Medium RFP DRAFT.docx | DOCX document | |
| Att_4_-_Delivery Schedule DRAFT.XLS | XLS spreadsheet | |
| Att_9_-_Past Performance Information DRAFT.doc | DOC document | |
| Att_8_-_ELIN Pricing Chart DRAFT.xls | XLS spreadsheet | |
| Att_1_WBM Specification DRAFT.pdf | ||
| Att_6_-_Unique Item Identification (UID) DRAFT.doc | DOC document | |
| Att_7_-_Warranty Terms DRAFT.doc | DOC document | |
| Att_5_-_Technical Data Rights Assertion DRAFT.doc | DOC document | |
| Att_10_-_Past Performance Questionnaire DRAFT.doc | DOC document | |
| Att_3_ -_Vendor Provided Spare Parts List DRAFT.xlsx | XLSX spreadsheet |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Att 2 Spec Response Matrix
| ATTACHMENT 2 |
| CNIC WORK BOAT MEDIUM |
| SPECIFICATION RESPONSE MATRIX Rev - |
NOTES & INSTRUCTIONS:
Offerors to submit Attachment 2 with response for parameters identified in the Specification (See Section J).
1. Where specific parameters or other technical information are required in the Specification (indicated by red text in the Specification), Offerors shall fill in the specific parameters/information for their proposed design for each boat configuration (as applicable) in this attachment and include supporting data in Vol I as directed. At bottom Offerors shall respond with 'Comply' to indicate their design meets all Specification requirements; or 'Comply w/Exceptions' to indicate disagreement with any specific section of the Specification.
2. A response of 'Comply w/Exceptions' shall be accompanied by amplifying notes in the 'Offeror's Notes' section at bottom, providing rationale for any exceptions. Each exception shall list the Specification section, the specific rationale for non-compliance with the section, and a proposed alternative approach. Any proposed alternative approach must meet the minimum requirement of the Specification to the Government's satisfaction. Description of Offeror's alternative approach shall include the detailed approach to achieving the minimum Specification requirement; applicable material specifications, make and model numbers for all parts/components; compliance with any requisite commercial or military standard, or associated “best practice”; and shall include any supporting product performance, test data, or other empirical evidence for the proposed product or service capability where applicable. The Government reserves the right to reject (without discussion) any proposed alternative which is incomplete or fails to meet minimum requirements of the Specification.
3. A response is required for each Specification section identified herein. The Government reserves the right to evaluate incomplete responses as non-compliant with the Specification and unacceptable for Factor 1 (Technical Approach).
| Specification Item | Specification Parameter |
| 070-1 | Enter Length Overall (LOA) including fendering and appendages: xx.xx feet (ft) |
| 070-1 | Enter Hull Length (Welded Structure Only): xx.xx ft |
[Shall be 29-30 ft] 070-1 Enter Beam Overall (BOA) including fendering: xx.x ft [Shall not exceed 15 ft]
| 070-1 | Enter Maximum Beam (Welded Structure only): xx.x ft |
| 070-1 | Enter Height, Lowest Appendage (skeg) to Fixed Structure (Overhead Line Guard): xx.x ft |
| 070-1 | Enter Height, Lowest Appendage to Moveable Structure (highest mast or antenna): xx.x ft |
| 070-1 | Enter Air Draft, Minimum Operation Condition waterline to Overhead Line Guard: xx.x ft |
[Shall not exceed of 13 ft] 070-1 Enter Height when Rigged for Transport (cabin and pusher knees removed): xx.x ft [Shall not exceed of 11 ft] 070-1 Enter Width when Rigged for Transport: xx.x ft [Shall not exceed 15 ft]
| 070-1 | Enter Total Installed Fuel Capacity: xxx gallons [Shall be minimum of 400 gallons] |
| 070-1 | Enter Full Load Displacement (as defined in Section 070): xx,xxx lbs incl x% construction or build margin or both |
| 070-1 | Enter Longitudinal Center of Gravity (LCG) in Full Load: xx.x ft forward of transom/keel intersect |
| 070-1 | Enter Static Full Load Draft (Hull): x.x ft |
| 070-1 | Enter Static Full Load Draft (to skegs): x.x ft |
[Shall not exceed 8 ft] 070-1 Enter Static Freeboard at the transom in the Min Op Condition: x.x ft [Shall not exceed 25 inches] 070-1 Enter Bollard Thrust in the forward direction in Min Op Condition: x,xxx lbs [Shall be minimum of 16,000 lbs] 070-1 Enter Bollard Thrust in the reverse direction in Min Op Condition: x,xxx lbs [Shall be minimum of 10,000 lbs] 070-1 Enter Sprint Speed (at x,xxx engine RPM): xx knots (kts) at Full Load in calm water [Shall be minimum of 6.5 knots]
| 100-1 | General Requirements for Hull Structure - Provide name and short description of structural methodology. |
| 233-1 | Inboard Diesel Engines - Verify that the minimum required speed and static bollard pull can be achieved on the proposed boat using the specified engines and marine gears. |
| All | Work Boat Docking Medium - Enter "Comply"; or enter "Comply w/Exceptions" AND provide rationale for exceptions in notes below. If “or equal” equipment is proposed, Offeror shall provide documentation demonstrating compliance with Specification Section 042-3. |
| Offeror's Notes: |
&12RFP N00024-21-R-2255 &10
&P of &N
Example Response
| ATTACHMENT 2 |
| CNIC WORK BOAT X |
| SPECIFICATION RESPONSE MATRIX - EXAMPLE RESPONSE |
See below for partial example responses.
Specification Item Specification Parameter Offeror Response (See Note 1)
| 070-1 | Enter Length Overall (LOA): xx.xx feet (ft) | 40.5 ft |
| 070-1 | Enter Hull Length (Lhull): xx.xx ft | 39.5 ft |
| 070-1 | Enter Beam Overall (BOA): xx.x ft | 16.0 ft |
| 070-1 | Enter Maximum Speed (at x,xxx engine RPM): xx knots (kts) at Full Load in calm water | 9.5 kts at 2,100 rpm |
| 070-2 | Enter list of submitted drawings describing the proposed boat. | 100-123456 Gen'l Arr |
100-123457 Transport (Continue per Sect L)
| 223-1 | Inboard Diesel Engines - Verify speeds and static bollard pull required in Spec can be achieved on proposed boat using specified engines. | Verified |
| All | CNIC Work Boat X Specification - Enter "Comply"; or enter "Comply w/ Exceptions" AND provide rationale for exceptions in notes below. | Comply w/ Exceptions |
| Offeror's Notes: | ||
| 581-1: Exception: Offeror has no local distributor for Fortress anchors and has assessed alternatives in accordance with Specification Section 042-3. Offeror proposes a BrandX Model xxx123 anchor in lieu of a Fortress anchor specified. A catalog sheet for BrandX Model xxx123 is included in Vol I. Offeror has provided BrandX anchors in 300 boats in similar sizes and applications. |
RFP N00024-21-R-2255
image1.png
File details come from the government source that posted it. Updated .