Att_2_Salient_Characteristics.pdf
PDF 156 KB Posted
- Attached to
- Culverts and Culvert End Sections
- Solicitation number
- FA282321Q4004
View the file
Other files
| File | Type | Posted |
|---|---|---|
| FA282321Q4004_Amended.pdf | ||
| Beta SAM QA_Culverts.pdf | ||
| Att_1_Provisions_Clauses.pdf | ||
| FA282321Q4004.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachment 2: Salient Characteristics
1. The Government requests the purchase/delivery of various size culverts and culvert end sections be made to:
Eglin AFB Duke Field.
796 CES/CEORH
Building 3031 Clay Street. (Duke Field) Eglin AFB, FL. 32542
Government Points of Contact will be provided after the contract is awarded.
2. The vender shall call Government Point(s) of Contact to schedule delivery during the hours of (0645 to 1630) not later than one business day in advance of anticipated delivery. At which time, the Government will provide the exact location for that particular delivery to include offloading capabilities. This is a hard requirement, no exceptions.
3. The Government is requesting purchase of various size culverts and culvert end sections or equal.
These are the minimal requirements that the Government is willing to accept in order to successfully complete these projected projects within the time and budget that has been allotted.
1. This product must be made of metal, 14 gauge steel. Galvanized corrugated metal culvert shall conform to AASHTO M-218, M-36. T-249 and AASHTO-444. This is a hard requirement, no exceptions.
2. The galvanized steel coils shall conform to the applicable requirements and be in accordance with NCSPA's (National Corrugated Steel Pipe Association). This is a hard requirement, no exceptions.
3. Culvert must be round and in the lengths specified. The will be no splitting of the pipe and a band used to make the desired length. The culvert pipe must be one piece. This is a hard requirement, no exceptions.
4. Culvert must Aluminized, this is a carbon sheet steel with hot-dip coating of aluminum and has the surface characteristics of aluminum and mechanical properties of steel. Aluminized Type II conforms to AASHTO M-274. This is a hard requirement, no exceptions.
5. Culvert metal end sections will be galvanized and the culvert nuts and bolts shall conform to AASHTO M-232. This is a hard requirement, no exceptions.
6. The Culvert sizes and lengths must be as follows (no splicing of the pipe):
36" ROUND ALUMINIZED 14GA T2 2ea 40' long 60" ROUND ALUMINIZED 14GA T2 5x1 4ea 50' long 36" ROUND ALUMINIZED 14GA T2 2ea 50' long 36" ROUND ALUMINIZED 14GA T2 1ea 30' long
File details come from the government source that posted it. Updated .