Att 2-B102 MSG FFE SPECIFICATIONS 2025 JAN FINAL.pdf

PROJECT NAME: B102 MSG DATE: JAN 2025

Alcoa, Tennessee REVISION DATE:

JOB NUMBER: WRITTEN BY: DDA

ITEM NUMBER: DSK-001

ITEM NAME: Administrative L-shape Workstation

MANUFACTURER:

MODEL SERIES:

MODEL NUMBER:

DESCRIPTION:

FINISHES: WOOD FINISH: TACKBOARD and PANELS: PULLS:

5", Satin Nickel

GROMMET:

Cherry, Autumn Direct, Pebbles Racetrack, Satin Nickel

LOCATION: Room No. Qty Room No. Qty

QUANTITY: 1

FF+E SPECIFICATIONS SHEET

SEE SPECIFICATIONS FOR

COMPONENTS ON

FOLLOWING SHEETS

RECEPT 1

JOB NUMBER: WRITTEN BY: DDA

ITEM NUMBER: DSK-001-PLAN

RECEPTION DESK UNIT 1.

ADMINISTRATIVE WORKSTATION

FF+E SPECIFICATIONS SHEET

JOB NUMBER: WRITTEN BY: DDA

ITEM NUMBER: DSK-001-SPECS

COMPONENTS

FF+E SPECIFICATIONS SHEET

CREDENZA, 24" X 60" x 30"H, Right F/F pedestal (lockable), center pencil drawer, center racetrack grommet (satin nickel finish), 3/4 high modesty panel to allow access to wall outlets, adjustable leveling glides.

ADJUSTABLE HEIGHT DESK, 24" x 72" x 28-1/2" - 42," metal legs, no modesty panel, adjustable leveling glides.

HUTCH, 16.5" D x 60" W x 52.5" H, two sliding glass doors, 2" integrated light valance with light fixture, one adjustable shelf, upholstered tackboard attached to back of hutch, hutch secured to credenza for stability.

PANEL SYSTEM, (2) 18" x 42" H panels, fabric covered, non-power; (2) 18" x 42" H panels, fabric covered, w/power in raceway; (1) 36" x 42" H panel, fabric covered, power in raceway, (1) 36" w x 6" d wood or metal shelf attached to 36" panel at 36" AFF, fabric covered panel, power in raceway.

CONSTRUCTION

CHASSIS CONSTRUCTION • Wood worksurfaces/tops are 1-3/16" thick tops with 3mm square wood edge. Grain direction on tops runs left-to-right. All joints are securely fastened by screws, L-brackets, dowels, and concealed fasteners to ensure maximum strength • Adjustable leveling glides are standard on all casegoods • End panels and support panels are 1-1 Ú8" thick, modesty panels are 3 Ú4" thick • Wood modesty panels have vertical grain direction • Back panels are fully finished.

PEDESTALS/UNDERSURFACE STORAGE • Full height pedestals with vertical wood grain to match chassis. Drawers feature 5-sided construction allowing for easy removal/replacement of drawer fronts • Sides, back and front are ½" thick white vinyl wrapped • Drawer fronts are 3-ply construction with matched woodgrain. Box and file drawers are equipped with black, full extension, progressive action slides • Precision steel ball bearings combined with sequence slide movement ensures long lasting operation • File drawers are equipped with black metal filing hardware for various filing requirements • All pedestals shall have silver lock cores with random keyed.

ADJUSTABLE HEIGHT DESK • Standard up/down switch included; can be mounted on the left or right side of the worksurface and is field installed • Height adjustable customer range: 281Ú2"-45"• Lifting weight capacity without the worksurface weight, distributive loading is 100 lbs. for desks and 150 lbs. for L-configurations • Lifting capacity loads must be balanced across the worksurface

• Adjustment speed: 11Ú2" per second • Two motors per desk • Height adjustable desk are control box free; the electrical system with intelligence is built into the column legs • Duty Cycle: 1 minute on; 9 minutes off • Anti-collision feature activates when the desk detects a sudden change in resistance against a firm obstruction; the desk will stop travel • Unit includes 35v power supply with 9' cord with two-prong plug • Programmable control switch with display screen allows up to four preset/saved height settings. This switch includes an auto-drive function.

JOB NUMBER: WRITTEN BY: DDA

ITEM NUMBER: DSK-002

ITEM NAME: Administrative L-shape Workstation

MANUFACTURER:

MODEL SERIES:

MODEL NUMBER:

DESCRIPTION:

FINISHES: WOOD FINISH: TACKBOARD and PANELS: PULLS:

5", Satin Nickel

GROMMET:

Cherry, Autumn Direct, Pebbles Racetrack, Satin Nickel

LOCATION: Room No. Qty Room No. Qty

QUANTITY: 1

FF+E SPECIFICATIONS SHEET

SEE SPECIFICATIONS FOR

COMPONENTS ON

FOLLOWING SHEETS

RECEPT 1

JOB NUMBER: WRITTEN BY: DDA

ITEM NUMBER: DSK-002-PLAN

RECEPTION DESK UNIT 2.

ADMINISTRATIVE WORKSTATION

JOB NUMBER: WRITTEN BY: DDA

ITEM NUMBER: DSK-002-SPECS

COMPONENTS

FF+E SPECIFICATIONS SHEET

CREDENZA, 24" X 60" x 30"H, Left F/F pedestal (lockable), center pencil drawer, center racetrack grommet (satin nickel finish), 3/4 high modesty panel to allow access to wall outlets, adjustable leveling glides.

ADJUSTABLE HEIGHT DESK, 24" x 72" x 28-1/2" - 42," metal legs, no modesty panel, adjustable leveling glides.

HUTCH, 16.5" D x 60" W x 52.5" H, two sliding glass doors, 2" integrated light valance with light fixture, one adjustable shelf, upholstered tackboard attached to back of hutch, hutch secured to credenza for stability.

PANEL SYSTEM, (2) 18" x 42" H panels, fabric covered, non-power; (2) 18" x 42" H panels, fabric covered, w/power in raceway; (1) 36" x 42" H panel, fabric covered, power in raceway, (1) 36" w x 6" d wood or metal shelf attached to 36" panel at 36" AFF, fabric covered panel, power in raceway.

CONSTRUCTION

CHASSIS CONSTRUCTION • Wood worksurfaces/tops are 1-3/16" thick tops with 3mm square wood edge. Grain direction on tops runs left-to-right. All joints are securely fastened by screws, L-brackets, dowels, and concealed fasteners to ensure maximum strength • Adjustable leveling glides are standard on all casegoods • End panels and support panels are 1-1 Ú8" thick, modesty panels are 3 Ú4" thick • Wood modesty panels have vertical grain direction • Back panels are fully finished.

PEDESTALS/UNDERSURFACE STORAGE • Full height pedestals with vertical wood grain to match chassis. Drawers feature 5-sided construction allowing for easy removal/replacement of drawer fronts • Sides, back and front are ½" thick white vinyl wrapped • Drawer fronts are 3-ply construction with matched woodgrain. Box and file drawers are equipped with black, full extension, progressive action slides • Precision steel ball bearings combined with sequence slide movement ensures long lasting operation • File drawers are equipped with black metal filing hardware for various filing requirements • All pedestals shall have silver lock cores with random keyed.

ADJUSTABLE HEIGHT DESK • Standard up/down switch included; can be mounted on the left or right side of the worksurface and is field installed • Height adjustable customer range: 281Ú2"-45"• Lifting weight capacity without the worksurface weight, distributive loading is 100 lbs. for desks and 150 lbs. for L-configurations • Lifting capacity loads must be balanced across the worksurface

• Adjustment speed: 11Ú2" per second • Two motors per desk • Height adjustable desk are control box free; the electrical system with intelligence is built into the column legs • Duty Cycle: 1 minute on; 9 minutes off • Anti-collision feature activates when the desk detects a sudden change in resistance against a firm obstruction; the desk will stop travel • Unit includes 35v power supply

JOB NUMBER: WRITTEN BY: DDA

ITEM NUMBER: DSK-003

ITEM NAME: CORNER WORKSTATION

MANUFACTURER:

MODEL SERIES:

MODEL NUMBER:

DESCRIPTION:

FINISHES: WOOD FINISH: TACKBOARD and PANELS: PULLS:

5", Satin Nickel

GROMMET:

Cherry, Autumn Direct, Pebbles Racetrack, Satin Nickel

LOCATION: Room No. Qty Room No. Qty

QUANTITY: 2

1ST

SERG

FF+E SPECIFICATIONS SHEET

DESIGN CONCEPT ONLY

CHIEF 1

SEE PLAN & SPECIFICATIONS

FOR COMPONENTS &

DIMENSIONS ON FOLLOWING

SHEETS

JOB NUMBER: WRITTEN BY: DDA

ITEM NUMBER: DSK-003-PLAN

CHIEF AND 1ST SERGEANT

WORKSTATION UNITS

JOB NUMBER: WRITTEN BY: DDA

ITEM NUMBER: DSK-003-SPECS

COMPONENTS

FF+E SPECIFICATIONS SHEET

DESK UNIT WITH CONTINUOUS TOP, one box/box/file pedestal (18"w x 24"d x 29"h), one file/file pedestal (18"w x 24"d x 29"h), radiused top edge at sitting position, 3/4 high modesty panel to allow access to wall outlets, center back (in corner) racetrack grommet, pedestals and back panels shall serve as structural support allowing for knee clearance at sitting position, adjustable leveling glides.

HUTCH, 16.5" D x 72" W x 52.5" H, two sliding glass doors, 2" integrated light valance with light fixture, one adjustable shelf, upholstered tackboard attached to face (on back) of hutch, 30" clearance between worksurface top and bottom shelf of hutch, hutch secured to desk unit for stability.

WARDROBE / CLOSED STORAGE UNIT, 24" W x 24" D x 81.625" H, wardrobe with chrome hanging rod, adjustable shelving, lockable, adjustable leveling glides. Note that wardrobe height and hutch height should align at top of units.

CONSTRUCTION

CHASSIS CONSTRUCTION • Wood veneer worksurfaces/tops are 1-3/16" thick tops with 3mm square wood edge. Grain direction on tops runs left-to-right. All joints are securely fastened by screws, L-brackets, dowels, and concealed fasteners to ensure maximum strength • Adjustable leveling glides are standard on all casegoods • End panels and support panels are 1-1 Ú8" thick, modesty panels are 3 Ú4" thick • Wood modesty panels have vertical grain direction • Back panels are fully finished.

PEDESTAL CONSTRUCTION • Full height pedestals with vertical wood veneer grain to match chassis. Drawers feature 5-sided construction allowing for easy removal/replacement of drawer fronts • Interior of sides, back and front are ½" thick white vinyl wrapped • Drawer fronts are 3-ply construction with matched woodgrain. Box and file drawers are equipped with black, full extension, progressive action slides • Precision steel ball bearings combined with sequence slide movement ensures long lasting operation • File drawers are equipped with black metal filing hardware for various filing requirements • All pedestals shall have silver lock cores, random keyed.

WARDROBE CONSTRUCTION • Wood veneer side panels and top are 1-3/16" thick tops with 3mm square wood edge. Vertical grain direction doors and side panels. All joints are securely fastened by screws, L-brackets, dowels, and concealed fasteners to ensure maximum strength • Adjustable leveling glides are standard on all casegoods Back panels, interior shelves, and interior of panels are wood veneer and fully finished.

JOB NUMBER: WRITTEN BY: DDA

ITEM NUMBER: DSK-004

ITEM NAME: Executive U-Shaped Desk

MANUFACTURER:

MODEL SERIES:

MODEL NUMBER:

DESCRIPTION:

FINISHES: WOOD FINISH: TACKBOARD: PULLS:

5", Satin Nickel

GROMMET:

Cherry, Autumn Direct, Pebbles Racetrack, Satin Nickel

LOCATION: Room No. Qty Room No. Qty

QUANTITY: 1

DEPT

COMM

SEE SPECIFICATIONS FOR

COMPONENTS ON

FOLLOWING SHEETS

DESIGN CONCEPT ONLY

JOB NUMBER: WRITTEN BY: DDA

ITEM NUMBER: DSK-004-PLAN

DEPUTY COMMANDER

EXECUTIVE WORKSTATION

JOB NUMBER: WRITTEN BY: DDA

ITEM NUMBER: DSK-004-SPECS

COMPONENTS

FF+E SPECIFICATIONS SHEET

EXECUTIVE DESK, 36" x 84" x 30"H, Left B/B/F pedestal (lockable), center pencil drawer, full modesty panel recessed 6" at center kneespace (breakfront), left and right racetrack grommets (satin nickel finish), adjustable leveling glides.

CREDENZA, 24" X 84" x 30"H, Right F/F pedestal (lockable), center racetrack grommet (satin nickel finish), 3/4 high modesty panel to allow for access to wall outlets, adjustable leveling glides.

ADJUSTABLE HEIGHT DESK, 24" x 48" x 28-1/2" - 45," inner shrouds to cover metal legs, wire management inside inner leg, no modesty panel, adjustable leveling glides.

EXECUTIVE HUTCH, 16.5" D x 84" W x 52.5" H, two sliding glass doors, 2" integrated light valance with light fixture, one adjustable shelf, upholstered tackboard attached to back of hutch, secured to credenza for stability.

WARDROBE / CLOSED STORAGE UNIT, 36" W x 24" D x 81.625" H, wardrobe with chrome hanging rod, adjustable shelving, lockable, adjustable leveling glides.

CONSTRUCTION

CHASSIS CONSTRUCTION • Wood worksurfaces/tops are 1-3/16" thick tops with 3mm square wood edge. Grain direction on tops runs left-to-right. All joints are securely fastened by screws, L-brackets, dowels, and concealed fasteners to ensure maximum strength • Adjustable leveling glides are standard on all casegoods • End panels and support panels are 1-1 Ú8" thick, modesty panels are 3 Ú4" thick • Wood modesty panels have vertical grain direction • Back panels are fully finished.

PEDESTALS/UNDERSURFACE STORAGE • Full height pedestals with vertical wood grain to match chassis. Drawers feature 5-sided construction allowing for easy removal/replacement of drawer fronts • Sides, back and front are ½" thick white vinyl wrapped • Drawer fronts are 3-ply construction with matched woodgrain. Box and file drawers are equipped with black, full extension, progressive action slides • Precision steel ball bearings combined with sequence slide movement ensures long lasting operation • File drawers are equipped with black metal filing hardware for various filing requirements • All pedestals shall have silver lock cores with random keyed.

ADJUSTABLE HEIGHT DESK • Standard up/down switch included; can be mounted on the left or right side of the worksurface and is field installed • Height adjustable customer range: 281Ú2"-45"• Lifting weight capacity without the worksurface weight, distributive loading is 100 lbs. for desks and 150 lbs. for L-configurations • Lifting capacity loads must be balanced across the worksurface

• Adjustment speed: 11Ú2" per second • Two motors per desk • Height adjustable desk are control box free; the electrical system with intelligence is built into the column legs • Duty Cycle: 1 minute on; 9 minutes off • Anti-collision feature activates when the desk detects a sudden change in resistance against a firm obstruction; the desk will stop travel • Unit includes 35v power supply

JOB NUMBER: WRITTEN BY: DDA

ITEM NUMBER: DSK-005

ITEM NAME: Executive U-Shaped Desk

MANUFACTURER:

MODEL SERIES:

MODEL NUMBER:

DESCRIPTION:

FINISHES: WOOD FINISH: TACKBOARD: PULLS:

5", Satin Nickel

GROMMET:

Cherry, Autumn Direct, Pebbles Racetrack, Satin Nickel

LOCATION: Room No. Qty Room No. Qty

QUANTITY: 1

FF+E SPECIFICATIONS SHEET

SEE SPECIFICATIONS FOR

COMPONENTS ON

FOLLOWING SHEETS

COMMDR 1

JOB NUMBER: WRITTEN BY: DDA

ITEM NUMBER: DSK-005-PLAN

COMMANDER

EXECUTIVE WORKSTATION

JOB NUMBER: WRITTEN BY: DDA

ITEM NUMBER: DSK-005-SPECS

COMPONENTS

FF+E SPECIFICATIONS SHEET

EXECUTIVE DESK, 36" x 84" x 30"H, Right B/B/F pedestal (lockable), center pencil drawer, full modesty panel recessed 6" at center kneespace (breakfront), left and right racetrack grommets (satin nickel finish), adjustable leveling glides.

CREDENZA, 24" X 84" x 30"H, Left F/F pedestal (lockable), center racetrack grommet (satin nickel finish), 3/4 modesty panel for access to wall outlets, adjustable leveling glides.

REFRIGERATOR CREDENZA, 24" D X 38" W x 36"H, includes 36" Sub Zero Designer (2)Refrigerator Drawers, LED interior lighting, requires 15 amp dedicated circuit, cabinet housing to match executive credenza design with matching wood drawer fronts as file pedestals, front ventilation, PRO stainless steel handles, adjustable leveling glides.

ADJUSTABLE HEIGHT DESK, 24" x 48" x 28-1/2" - 45," inner shrouds to cover metal legs, wire management inside inner leg, no modesty panel, adjustable leveling glides.

EXECUTIVE HUTCH, 16.5" D x 84" W x 52.5" H, two sliding glass doors, 2" integrated light valance with light fixture, one adjustable shelf, upholstered tackboard attached to back of hutch, secured to credenza for stability.

CONSTRUCTION

CHASSIS CONSTRUCTION • Wood worksurfaces/tops are 1-3/16" thick tops with 3mm square wood edge. Grain direction on tops runs left-to-right. All joints are securely fastened by screws, L-brackets, dowels, and concealed fasteners to ensure maximum strength • Adjustable leveling glides are standard on all casegoods • End panels and support panels are 1-1 Ú8" thick, modesty panels are 3 Ú4" thick • Wood modesty panels have vertical grain direction • Back panels are fully finished.

PEDESTALS/UNDERSURFACE STORAGE • Full height pedestals with vertical wood grain to match chassis. Drawers feature 5-sided construction allowing for easy removal/replacement of drawer fronts • Sides, back and front are ½" thick white vinyl wrapped • Drawer fronts are 3-ply construction with matched woodgrain. Box and file drawers are equipped with black, full extension, progressive action slides • Precision steel ball bearings combined with sequence slide movement ensures long lasting operation • File drawers are equipped with black metal filing hardware for various filing requirements • All pedestals shall have silver lock cores with random keyed.

ADJUSTABLE HEIGHT DESK • Standard up/down switch included; can be mounted on the left or right side of the worksurface and is field installed • Height adjustable customer range: 281Ú2"-45"• Lifting weight capacity without the worksurface weight, distributive loading is 100 lbs. for desks and 150 lbs. for L-configurations • Lifting capacity loads must be balanced across the worksurface

• Adjustment speed: 11Ú2" per second • Two motors per desk • Height adjustable desk are control box free; the electrical system with intelligence is built into the column legs • Duty Cycle: 1 minute on; 9 minutes off • Anti-collision feature activates when the desk detects a sudden change in resistance against a firm obstruction; the desk will stop travel • Unit includes 35v power supply

JOB NUMBER: WRITTEN BY: DDA

ITEM NUMBER: WRBS-001

ITEM NAME: Wardrobe with Closed Storage Unit

MANUFACTURER:

MODEL SERIES:

MODEL NUMBER:

DIMENSIONS: Overall: 30"w x 18"d x 81.625"h

DESCRIPTION:

FINISHES: WOOD FINISH: PULLS:

5", Satin Nickel

Cherry, Autumn

LOCATION: Room No. Qty Room No. Qty

QUANTITY: 2

FF+E SPECIFICATIONS SHEET

RECEPT 2

Wardrobe and storage unit with doors, wardrobe with chrome coat rod, glides, doors complete with concealed hinges, door at right hand orientation, linear pulls, lockable wardrobe door. 6H includes one fixed shelf and four adjustable shelves. Linear pulls.

Lockable. Refer to Technical Specifications DSK-004 TECH for detailed construction

JOB NUMBER: WRITTEN BY: DDA

ITEM NUMBER: WRBS-002

ITEM NAME: Wardrobe with Closed Storage Unit

MANUFACTURER:

MODEL SERIES:

MODEL NUMBER:

DIMENSIONS: Overall: 36"w x 24"d x 81.625"h

DESCRIPTION:

FINISHES: WOOD FINISH: PULLS:

5", Satin Nickel

Cherry, Autumn

LOCATION: Room No. Qty Room No. Qty

QUANTITY: 1

FF+E SPECIFICATIONS SHEET

Wardrobe and storage unit with doors, wardrobe with chrome coat rod, glides, doors complete with concealed hinges, door at right hand orientation, linear pulls, lockable wardrobe door. 6H includes one fixed shelf and four adjustable shelves. Linear pulls.

Lockable. Refer to Technical Specifications DSK-004 TECH for detailed construction

COMMDR 1

JOB NUMBER: WRITTEN BY: DDA

ITEM NUMBER: STOR-001

ITEM NAME: Storage/Lateral File Cabinet

MANUFACTURER:

MODEL SERIES:

MODEL NUMBER:

DIMENSIONS: Overall: 36"w x 20"d x 81.625"h

DESCRIPTION:

FINISHES: WOOD FINISH: PULLS:

5", Satin Nickel

Cherry, Autumn

LOCATION: Room No. Qty Room No. Qty

QUANTITY: 1

FF+E SPECIFICATIONS SHEET

Storage cabinet with doors and two-drawer lateral file combination, adjustable leveling glides, doors complete with concealed hinges, linear pulls, lockable doors and drawers, one fixed shelf and four adjustable shelves. Refer to Technical Specifications DSK-004 TECH for detailed construction information.

WORK

RM

JOB NUMBER: WRITTEN BY: DDA

ITEM NUMBER: CHR-001

ITEM NAME: Task Chair

MANUFACTURER:

MODEL SERIES:

MODEL NUMBER:

DIMENSIONS: Overall: 26.50" w 40" - 44.80" overall height 16.25" - 18.75" seat depth 19.25" wide seat

DESCRIPTION:

FINISH: Seat Upholstery: Leather (Standard Mfr) Mesh: Pinstripe, Graphite Trim: Gray with brushed aluminum

LOCATION: Room Qty Room No. Qty

RECEPT 2

CHIEF 1

1ST SGT 1

QUANTITY: 4

Task chair with automatic recline tension adjustment, automatic backrest/lumbar support, pneumatic seat height adjustment, vertical armrest adjustment, and seat-depth adjustment; 5-prong base with soft casters, upholstered seat and armrests, form-sensing mesh back. supports user height range of 5'-0" - 6'-4" and weight range of 100 lbs - 400 lbs. Contoured seat cushion. Aluminum base.

JOB NUMBER: WRITTEN BY: DDA

ITEM NUMBER: CHR-002

ITEM NAME: Task Chair

MANUFACTURER:

MODEL SERIES: Freedom with Headrest

MODEL NUMBER:

DIMENSIONS: Overall: 26.75"W x 17.40"-19.85"D 48.2" - 53" H

DESCRIPTION:

FINISH: Upholstery: Ticino, Charcoal Trim: Graphite with Graphite

LOCATION: Room No. Qty Room No. Qty

COMM 1

DEP COM 1

QUANTITY: 2

Executive task chair, weight-sensitive, self-locking recline mechanism with 20 degrees of movement, automatically pivoting backrest, syndhronous arms, countoured cushion with waterfall edge, dynamic headrest with 5" vertical adjustment, 5-prong base, casters for carpeted floors.

JOB NUMBER: WRITTEN BY: DDA

ITEM NUMBER: CHR-003

ITEM NAME: Guest Chair

MANUFACTURER:

MODEL SERIES:

MODEL NUMBER:

DIMENSIONS: Overall: 34"H x 30"w x 28"d

SH: 18"

DESCRIPTION:

FINISH: Seat/Back Upholstery:

HBF, Woven Memory, 1019-90 Black Truffle

Wood Finish: Cherry, Autumn

LOCATION: Room No. Qty

WORK 2

COMM 3

CHIEF 1

QUANTITY: 6

Guest chair, upholstered seat, back, and arms, four legs, glides. Hardwood frame with finger-jointed plywood, multiple densities of polyurethane foams and polyester fiber on seat and back, no tufting, solid wood legs. Construction shall meet ANSI/BIFMA LEVEL standards for weight performance, foam performance, and fire rating performance. Construction shall meet ANSI/BIFMA LEVEL standards for weight performance, foam performance, and fire rating performance.

JOB NUMBER: WRITTEN BY: DDA

ITEM NUMBER: CHR-004

ITEM NAME: Conference Chair

MANUFACTURER:

MODEL SERIES: Cadre Swivel Seating

MODEL NUMBER:

DIMENSIONS: Overall: 26"d x 24"w x 41-1/2"-44-1/2" h Inside: 18-3/4"d x 19-1/2"w x 21"h Seat: 18-1/2" H - 22-1/2" H Arm: 24-1/4" - 29" h

DESCRIPTION:

FINISH: Seat/Back/Arm Cap Upholstery: Base and Arms:

Black, Full Grain Leather Polished Chrome Full aniline dyed

LOCATION: Room No. Qty

CONF 10

QUANTITY: 10

High-back conference chair, fully upholstered seat and back, channel-stitched seat and inside back, knee tilt adjustment, pneumatic seat height adjustment, arms wrap around back of the chair, 5-prong base with double-wheeled casters, casters for carpeted floor surface (hard casters), upholstered arm cap.

JOB NUMBER: WRITTEN BY: DDA

ITEM NUMBER: LNG-001

ITEM NAME: 3- Seat Sofa

MANUFACTURER:

MODEL SERIES:

MODEL NUMBER:

DIMENSIONS: Overall: 33.5"d x 84"w x 34"h

SH: 18"

DESCRIPTION:

FINISH: Seat/Back Upholstery:

364-220 Leather, Dark Brown

LOCATION: Room No. Qty Room No. Qty

COMM 1

DEP COM 1

QUANTITY: 2

3-seat sofa, fully upholstered, hardwood frame with finger-jointed plywood, multiple densities of polyurethane foams and polyester fiber on seat and back, attached back cushions, no tufting on seat cushion, steel interior construction support, wood plinth legs. Construction shall meet ANSI/BIFMA LEVEL standards for weight performance, foam performance, and fire rating performance.

JOB NUMBER: WRITTEN BY: DDA

ITEM NUMBER: TBL-001

ITEM NAME: Conference Table W/Logo

MANUFACTURER:

MODEL SERIES:

MODEL NUMBER:

DIMENSIONS: Overall:

48" X 120" x 30" H

DESCRIPTION:

FINISH: Top: Veneer 2 Quarter Sliced Cherry, Light Cherry Panel Legs: Veneer 2 Quarter Sliced Cherry, Light Cherry Flat Edge: Light Cherry Metals: Brushed Aluminum WOOD FINISH:

LOCATION: Room Qty CONF 1 Cherry, Autumn

QUANTITY: 1

See Technical Specifications on next sheet.

JOB NUMBER: WRITTEN BY: DDA

ITEM NUMBER: TBL-001 TECH SPECS

ITEM NAME: Conference Table W/Logo

MANUFACTURER:

MODEL SERIES:

MODEL NUMBER:

DIMENSIONS: Overall:

48" X 120" x 30" H

DESCRIPTION:

FULL COLOR LOGO TO BE DETERMINED

Boat-shaped conference table. Wood veneer top is 3-ply construction, 1-1/2” thick, comprised of a particleboard substrate. Wood veneer top faced with premium veneer and backed with a polymer resin impregnated moisture resistant backer material.

Multi-piece top is connected with 1/8” thick plastic splines for vertical alignment and steel mechanical fasteners for horizontal alignment to firmly connect the tops end to end. • Flat edge – banded with 1mm ebgebands. Closed rectangular wood base panels constructed of balanced 3 ply, ¾” MDF panels. Panels faced with premium veneer and backed with a polymer resin impregnated moisture resistant backer material. Panels are securely fastened together with solid hardwood cleats, fluted glued dowels and pocket bore screws. A steel top plate is connected to the internal solid hardwood cleats with screws. The steel top plate is used to connect the base to the table top. The internal side of the base includes pre-bored connection points for the beam attachment and two 2 7/8” diameter holes for routing wires down the base.

The solid base internal panel includes a removable wire management panel. This panel is held into place on the bottom with steel brackets and the top of the panel held into place with a magnetic catch. Panel base assemblies include a dual beam construction. A powder coated extruded aluminum beam assembly is connected to the bases with steel screws and tapped bosses located in the frame. Wire management clips are included with the beam assembly. The bottom of the beam is covered with a ½” thick MDF balanced 3 ply panel, faced and backed with a polymer resin impregnated moisture resistant material. All veneer finishes feature 20 sheen, open pore, water based, UV cured low-emitting finish. Two equally spaced media connect units with hinged flip-top covers to house (4) 110 Volt power outlets and 2 USB charging connections. Full color logo application to be determined.

JOB NUMBER: WRITTEN BY: DDA

ITEM NUMBER: TBL-002

ITEM NAME: Occasional Table, Round

MANUFACTURER:

MODEL SERIES:

MODEL NUMBER:

DIMENSIONS: Overall:

20" OH x 20" DIA

DESCRIPTION:

FINISH: WOOD FINISH:

LOCATION: Room Qty Room No. Qty

COMM 1

DEP COM 1

CHIEF 1

Cherry, Autumn

QUANTITY: 3

Wood round side table, 1/2" thick wood veneer top, 3/4" thick wood core shelf with wood veneer top and finished underside, wood base and leg construction, solid wood tapered legs, Indoor Advantage Gold certified, ANSI/BIFMA Level 2 furniture sustainability standard certified. All surfaces to be securely attached for durability and stability. All wood finishes feature 20 sheen, open pore, water based, UV cured low-emitting finish. Solid wood and veneer species to be cherry.

JOB NUMBER: WRITTEN BY: DDA

ITEM NUMBER: TBL-003

ITEM NAME: Occasional Table, Rectangle

MANUFACTURER:

MODEL SERIES:

MODEL NUMBER:

DIMENSIONS: Overall:

16" H x 48" W X 24" D

DESCRIPTION:

FINISH: WOOD FINISH:

LOCATION: Room Qty Room No. Qty

COMM 1

Cherry, Autumn

QUANTITY: 1

Wood rectangle shaped coffee table, 1/2" thick wood veneer top, 3/4" thick wood core shelf with wood veneer top and finished underside, wood base and leg construction, solid wood tapered legs, Indoor Advantage Gold certified, ANSI/BIFMA Level 2 furniture sustainability standard certified. All surfaces to be securely attached for durability and stability. All wood finishes feature 20 sheen, open pore, water based, UV cured low-emitting finish. Solid wood and veneer species to be cherry.

JOB NUMBER: WRITTEN BY: DDA

ITEM NUMBER: TBL-004

ITEM NAME: Occasional Table

MANUFACTURER:

MODEL SERIES:

MODEL NUMBER:

DIMENSIONS: Overall: 24"W x 24"D x 16"H

DESCRIPTION:

FINISH:

WOOD FINISH:

LOCATION: Room Qty Room No. Qty

COMM 1

Cherry, Autumn

QUANTITY: 1

Square-shaped occasional table, wood veneer top is 3-ply construction, 1-1/2” thick, comprised of a particleboard substrate. Wood veneer top faced with premium veneer and backed with a polymer resin impregnated moisture resistant backer material. Flat edge – banded with 1mm ebgebands. Wood veneer table base constructed of 3/4" panels comprised of particleboard substrate, adjustable leveling glides. Indoor Advantage Gold certified, ANSI/BIFMA Level 2 furniture sustainability standard certified. All surfaces to be securely attached for durability and stability. All wood finishes feature 20 sheen, open pore, water based, UV cured low-emitting finish.

Solid wood and veneer species to be cherry.

JOB NUMBER: WRITTEN BY: DDA

ITEM NUMBER: TCANS-001

ITEM NAME: Office Trash Can

MANUFACTURER:

MODEL SERIES:

MODEL NUMBER:

DIMENSIONS: Overall: 14" x 10" x 15"

DESCRIPTION:

FINISH: Black

LOCATION: Room Qty Room No. Qty

QUANTITY: 7

Seven gallon space-efficient trash can, lightweight plastic, rolled rim holds liners.

FF+E SPECIFICATIONS SHEET

ALL

SPACES

JOB NUMBER: WRITTEN BY: DDA

ITEM NUMBER: RCANS-001

ITEM NAME: Office Recycling Container

MANUFACTURER:

MODEL SERIES:

MODEL NUMBER:

DIMENSIONS: Overall: 14" x 10" x 15"

DESCRIPTION:

FINISH: Blue

LOCATION: Room Qty Room No. Qty

QUANTITY: 7

Seven gallon space-efficient recycling container for paper, cans, and bottles;

lightweight plastic, rolled rim holds liners.

FF+E SPECIFICATIONS SHEET

ALL

SPACES

JOB NUMBER: WRITTEN BY: DDA

ITEM NUMBER: WHTBRD-001

ITEM NAME: Glass Whiteboard

MANUFACTURER:

MODEL SERIES:

MODEL NUMBER:

DIMENSIONS: Overall: 96" x 48"

DESCRIPTION:

FINISH: Tool Tray to be anodized Aluminum

LOCATION: Room Qty

CONF 1

QUANTITY: 1

Glass Frameless Whiteboard, Magnetic, mounted by z-clips, 1/4" thick tempered safety-rated glass, non-staining writing surface, compatible with any marker type, low-iron content for maximum color clarity, gloss glass finish. Tool tray to be full length of board, 96".

JOB NUMBER: WRITTEN BY: DDA

ITEM NUMBER: WHTBRD-002

ITEM NAME: Glass Whiteboard

MANUFACTURER:

MODEL SERIES:

MODEL NUMBER:

DIMENSIONS: Overall: 36" x 24"

DESCRIPTION:

FINISH: Tool Tray to be anodized Aluminum

LOCATION: Room Qty

RECEPT 2

QUANTITY: 2

FF+E SPECIFICATIONS SHEET

Glass Frameless Whiteboard, Magnetic, mounted by z-clips, 1/4" thick tempered safety-rated glass, non-staining writing surface, compatible with any marker type, low-iron content for maximum color clarity, gloss glass finish. Tool tray to be full length of board, 96".

JOB NUMBER: WRITTEN BY: DDA

ITEM NUMBER: MICRO-001

ITEM NAME: MICROWAVE

MANUFACTURER:

MODEL SERIES:

COUNTERTOP

MODEL NUMBER:

DIMENSIONS: 13-3/4"H X 24"W X 19-1/2"D

DESCRIPTION:

FINISH: Stainless Steel

LOCATION: Room Qty

BREAK 1

QUANTITY: 1

Microwave, countertop model, 2.2 Cu Ft capacity, inverter defrost technology, sensor cooking controls, 1200 Watts, Electronic Touch, Glass Turntable, JOB NUMBER: WRITTEN BY: DDA

ITEM NUMBER: COFFEE-001

ITEM NAME: COFFEE MAKER

MANUFACTURER:

MODEL SERIES:

MODEL NUMBER:

DIMENSIONS: 18.9"H X 8.4"W X 21.5"D

DESCRIPTION:

FINISH:

LOCATION: Room Qty

TBD 1

QUANTITY: 1

12 Cup Dual Volt automatic Coffee Brewer with 3 warmers, medium volume brewing solution, pourover feature, hot water faucet, plumbed, JOB NUMBER: WRITTEN BY: DDA

ITEM NUMBER: REF-001

ITEM NAME: Refrigerator/Freezer, French Door Style

MANUFACTURER:

MODEL SERIES:

MODEL NUMBER:

DIMENSIONS: Overall: 36.25" D x 35.75" W x 70.5" H

DESCRIPTION:

FINISH: Fingerprint Resistant Stainless Steel

LOCATION: Room No. Qty

BREAK 1

QUANTITY: 1

FF+E SPECIFICATIONS SHEET

French door refrigerator with freezer pull-out drawer below, 27.7 cu ft.total capacity, water and ice dispenser in door front, frost free, 9.17 cu ft freezer and 18.7 cu ft refrigerator, interior lighting in refrigerator and freezer, 5 adjustable spill-proof interior shelves in refrigerator and 2 baskets/bins, two-level freezer storage baskets, gallon door storage, external controls with temperature settings and displays, door alarm, icemaker, water filtration.