Att 1 PWS.Tech Specs Oxygen Nitrogen Hydrogen Analyzer.pdf
PDF 129 KB Posted
- Attached to
- Oxygen Nitrogen Hydrogen Analyzer Federal contract opportunity
- Solicitation number
- SP4706-25-Q-0014
- Issued by
- Defense Logistics Agency
About this file
This Performance Work Statement (PWS) details the technical specifications for an Oxygen Nitrogen Hydrogen (ONH) Analyzer for the DLA Product Test Center's TA Lab. The objective is to expand testing capabilities by acquiring an analyzer capable of performing elemental analysis using inert gas fusion technique for measuring oxygen, nitrogen, and hydrogen content in various materials including inorganic materials, ferrous and nonferrous alloys, and refractory materials.
Key requirements include a simultaneous ONH analyzer with specific features such as an auto cleaner, multi-detector oxygen determination system, dynamic flow compensation system, auto loader/sampler with 20 crucible positions, three-stage carrier gas purification system, PC with Windows 11, instrument software, analytical balance, and gas regulators. The procurement also includes onsite installation, basic calibration, and two-day training for up to five DLA employees. Additional specifications cover electrical requirements (208volt, 50/60Hz, 12kVA), a one-year comprehensive warranty, and delivery to the DLA Product Test Center in Philadelphia, PA within 120 days of award. Invoices must be submitted through Wide Area Workflow (WAWF), with the DoDAAC code SL0701 for the TA Lab.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SF1449_SP470625Q0014.PDF |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PWS & Technical Specifications Oxygen Nitrogen Hydrogen Analyzer
DLA Product Test Center, TA Lab
Objective:
To obtain an Oxygen Nitrogen Hydrogen (ONH) Analyzer to expand the Product Test Center’s (PTC) testing capabilities for its customers. An ONH Analyzer will enable the PTC to perform elemental analysis using the inert gas fusion technique for wide-range measurement of oxygen, nitrogen, and hydrogen content of inorganic materials, ferrous and nonferrous alloys, and refractory materials.
The DLA Product Test Center-TA Lab has listed the requirements for the procurement of an ONH Analyzer. The following specifications are a list of minimum functions and features required by the DLA Product Test Center.
Minimum Requirements:
1. Specifications: Simultaneous Oxygen, Nitrogen, and Hydrogen Analyzer by Inert Gas Fusion
a) Auto Cleaner
b) Multi-Detector Oxygen Determination System
c) Dynamic Flow Compensation System
d) Auto Loader with a minimum of 20 crucible positions, if available
e) Auto Sampler with a minimum of 20 crucible positions, if available
f) Three-Stage Performance Carrier Gas Purification System
g) PC, Monitor, Windows 11 or later
h) Instrument Software with License Key
i) Analytical Balance (120g, 0.1mg readability, 0.1mg repeatability) with Software
Interface
j) 2-Stage Regulator for Inert Gas Cylinder
k) 2-Stage Regulator for Compressed Air Cylinder
l) Onsite Installation, Basic Calibration, and Training (2 days)
i) Installation: provide complete installation and setup for operational condition; to include unpacking instrumentation and accessories, component connections, cables, power connections, controller firmware setup, etc.
(1) OEM manual provided
ii) Certification/verification/calibration: provide instrument certification or verification of instrument performance upon installation. Provide NIST Traceable ANSI/NCSL Z540.1 with data certificate for all components/sub-components, as applicable
iii) Training: Provide 2-days onsite training on operation, application development, routine maintenance, and sample analysis for up to five (5) DLA employees
2. Electrical: 208volt, 50/60Hz, 12kVA
3. Warranty: warranty period will cover parts, labor and travel, for one year
4. Pricing: to include shipping/delivery
5. Notice of delivery: contractor shall give notice to Edward Francoeur
(Edward.Francoeur@dla.mil 445-737-0829) and Jamie Hieber (Jamie.Hieber@dla.mil 445-737-0833) when instrument is to be delivered
6. Delivered to/ Mark for:
Attn: Edward Francoeur DLA Product Test Center 700 Robbins St., Bldg. 5-D Philadelphia, PA 19111
7. Period of performance: 120 days from date of award to include delivery
8. Invoices: all invoices must be submitted through Wide Area Workflow (WAWF), See
DFARS Clause 252.232-7006 Wide Area Workflow Payment Instructions for detailed instructions on how to submit invoices
9. DoDAAC: SL0701 (TA Lab) mailto:Edward.Francoeur@dla.mil mailto:Jamie.Hieber@dla.mil
File details come from the government source that posted it. Updated .