Att 0010 - C of A MJU 76B SLIDER.pdf
PDF 139 KB Posted
- Attached to
- Plastic Parts for MJU-76 Igniter Assembly Federal contract opportunity
- Solicitation number
- W52P1J-21-Q-PT76
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Att 0001 - MJU76B Plastic Parts - Pricing Matrix - Rev B - unlocked.xls | XLS spreadsheet | |
| Att 0001 - MJU76B Plastic Parts - Pricing Matrix - Rev A - unlocked.xls | XLS spreadsheet | |
| Att 0009 - C of A MJU 76B PISTON.pdf | ||
| Att 0011 - FAR 52.204-24 - Sec 889.docx | DOCX document | |
| Att 0001 - MJU76B Plastic Parts - Pricing Matrix - unlocked.xls | XLS spreadsheet | |
| Att 0008 - C of A MJU 76B IGNITER BODY.pdf | ||
| Att 0007 - C of A MJU 76B IGNITER COUPLER.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CERTIFICATE OF ANALYSIS
For those material(s) identified below, a Certificate of Analysis (C of A) shall be provided to the government at time of delivery to CAAA (Crane Army Ammunition Activity).
The information contained on the Certificate of Analysis shall be adequate to determine compliance with all applicable requirements of the material specification(s) listed below.
Availability of the Certificate of Analysis may be in addition to other Purchase requirements and does not reduce or prejudice the Government’s right to inspect supplies under other provisions of this contract.
The certificate of analysis shall contain the following:
a. Name and address of Manufacturer and Supplier when *applicable.
(*If not manufactured by the Supplier.)
b. Purchase order number.
c. Identification of material by drawings, description, specifications, revisions and part number.
d. Quantity of material.
e. Material results shall address drawing specifications.
Item: Slider, Drawing DEV21005 Rev. R0 (Development drawing “Approved / Signed”) AF (Air Force) Drawing Reference 201825319
Made from Material: XEONY 6370.
Required: 100% Virgin Material. No Reground Material Allowed.
Note: The slider shall be identifiable / traceable to the individual mold cavity.
Note: The slider shall be identified with a traceable lot number at time of delivery.
The lot number shall contain identification of manufacturer, date of production and should be exclusive to each production run.
(i.e. CRA21E001-001, Crane Army, manufactured May 2021, lot 1)
At time of delivery to CAAA, Item(s) cannot be accepted without documentation to support the above material was used to produce.
f. Quantity tested, sample size, and specimen type as applicable.
g. Date, signature, and title of the authorized representative of the contractor that is attesting to the accuracy of test report content.
Component: Slider.
Requirements for: MJU-76/B Program
29 April, 2021.
jacqueline.harper New Stamp
File details come from the government source that posted it. Updated .