Att 0008 - Material Cert - Igniter Top.pdf
PDF 111 KB Posted
- Solicitation number
- W52P1J-21-Q-PTS7
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Att 0010 - Material Cert MJU-75B Sliders.doc | DOC document | |
| Att 0011 - Material Cert - NYLON RESIN.doc | DOC document | |
| Att 0007 - INJECTION MOLDING PARAMETERS.xlsx | XLSX spreadsheet | |
| Att 0009 - Material Cert - PE Interface Cover.doc | DOC document | |
| Att 0014 - Vendor Guide - beta.sam.gov.pptx | PPTX presentation | |
| Att 0013 - FAR 52.204-24 - Sec 889.docx | DOCX document | |
| Att 0001 - MJU75B Plastic Parts - Pricing Matrix.xls | XLS spreadsheet | |
| Att 0012 - Material Cert - Igniter Bottom.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CERTIFICATE OF ANALYSIS
For those material(s) identified below, a Certificate of Analysis (C of A) report shall be provided to the government at time of delivery to CAAA (Crane Army Ammunition Activity).
The results contained on the Certificate of Analysis report(s) shall be adequate to determine compliance with all applicable requirements of the material specification(s) listed below. Availability of the Certificate of Analysis may be in addition to other Purchase requirements and does not reduce or prejudice the Government’s right to inspect supplies under other provisions of this contract.
The certificate of analysis shall contain the following:
a. Name and address of Manufacturer and Supplier when *applicable.
(*If not manufactured by the Supplier.)
b. Purchase order number.
c. Identification of material by product description, part number (drawing & revision) and date of manufacturer (lot number).
d. Quantity of material.
e. Certificate of Analysis shall address drawing specifications.
Item: Igniter Top Drawing: 201416434 Material Drawing: 20156941 Resin, Nylon
Part No: ZYTEL SUPER TOUGH NYLON 80G 43 HS 1L BK 104 See Note 3 - Only the item described on this drawing when procured from the Vender(s) listed hereon is approved by Hill AFB for use in the Applications(s) specified hereon. A substitute item shall not be used without prior approval by Hill AFB.
Note: Component (Igniter Top) shall be identified with a traceable lot number at time of delivery.
Note: Component (Igniter Top) shall be Identifiable / Traceable to Individual Cavities of Mold.
At time of delivery to CAAA, Item(s) cannot be accepted without documentation to support the above material was used to produce.
f. Date, signature, and title of the authorized representative of the contractor that is attesting to the accuracy of the Certificate of Analysis.
Component: Igniter Top, Dwg. 201416434.
Requirements for: MJU-75/B Program
File details come from the government source that posted it. Updated .