Atch 3 - Drawing G1-47-1611 Rev H.pdf

This is a technical drawing specification for adhesive-polyester tape, generated and maintained in AutoCAD 2015. The drawing details a cylindrical tape product with specific dimensional requirements: a minimum diameter of 3.00 inches, a length tolerance of 6.5 +.100/-.000 inches, and overall dimensions shown in the length table. The material specification calls for 3M 850 polyester adhesive tape or equivalent, with the tape centered 5.50 inches from one end and deactivated with an appropriate colored release agent to be determined by the design activity.

The drawing incorporates multiple applicable standards including ASME Y14.5-2009 for dimensioning and tolerances, ASME Y14.38-2007 for abbreviations, ASME Y14.100 for engineering drawing practices, and MIL-STD-130N for item identification. Item identification follows MIL-STD-130N nomenclature standards with specific part number, date, and nomenclature requirements. The length table provides three configurations with part numbers and corresponding minimum/maximum yard measurements. The drawing is classified as unclassified and notes that changes shall only be incorporated as directed by the design activity, with distribution restricted to U.S. Government agencies and their contractors for official use only.