Atch 2 Salient Chars Checklist (25JAN24).xlsx
XLSX spreadsheet 19 KB Posted
- Attached to
- Horizontal Baler Federal contract opportunity
- Solicitation number
- FA461324Q0009
About this file
This solicitation is for the delivery, installation, start-up, and training of a horizontal side eject baler to be located at F. E. Warren Air Force Base in Wyoming. The baler must meet specific requirements including a minimum feed opening and bale size, the ability to process multiple materials, a manual bale tie system, a minimum baling force of 120,000 to 150,000 pounds, and side ejection of completed bales. Additional requirements include hydraulic and electrical components along with warranty, delivery, and training terms. Quotes are due by February 9, 2024 with anticipated delivery within 150 calendar days of order receipt. The soliciting agency is the Department of the Air Force Global Strike Command.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Atch 1 PWS - Horizontal Baler (24JAN24).pdf | ||
| Solicitation - FA461324Q0009.pdf | ||
| Atch 3 Pictures.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sheet1
| VENDOR CONFIRMATION FORM | |
| INSTRUCTIONS: Please put in the model name and put a check in the "YES" or "NO" box if the model you quoted previously meets the standards below. Provide supporting documents to verify your answers. | Vendor Name: |
| Solicitation: FA461324Q0009 | Cage Code: |
| Must have the following characteristics, but not limited to: |
Model Name: Yes No Comments
| CLIN 0001: Marathon Horizontal Baler, Model: SE 604842-830, or equivalent*** |
| Feed Opening (L x W): 50” x 40” minimum |
| Bale Size (L x W x H): 72” x 48” x 42" |
| Bale Material: Multi-material processing capability |
| Bale Tie: Manual |
| Maximum Baling Force: 120,000-150,000 lbs |
| Bale Ejection Type: Side Eject (not closed end), Full Ejection (see App A) |
| Bale Door Latch: Hydraulic |
| Motor Type: Electrical |
| Motor Power: 26-30 Horsepower (HP) |
| Motor Voltage: 460 Volts |
| Motor Amperage: 60 Amps Maximum |
| Main Cylinder: 8" |
| Reversable Ram Shear |
| Replaceable floor and ram bottom liners |
| Lower photocell |
| Keyed power “ON” with Light |
| Startup Alarm with Buzzer |
| Control Panel including Fused Power Disconnect |
| Oil heater, thermostatically controlled |
| Factory mounted side feed hopper, flared out, facing the same direction as bale ejection |
| Horizontal Baler Total Length shall not exceed 24' |
| Minimum Warranty per Section 3.2.1 |
*** Please see Appendix A of PWS dated 24 January 2024 for example of Horizontal Side Eject Baler
| CLIN 0002 Delivery, Install, Start-Up, and Training | Yes | No | Comments |
| Delivery Complete within 150 Calendar Days After Receipt of Order (ARO) | |||
| Shipping: FOB Destination | |||
| Install and On-site Training | |||
| Coordination/Notification |
Company
Name / Title
Signature
File details come from the government source that posted it. Updated .