Atch 2.C-5 Training Loads Salient Characteristics.pdf

C-5 Training Cargo Loads Salient Characteristics

Designed and manufactured in Catoosa, OK, the C-5 Training Cargo Loads, also known as Dummy Cargo Loads (DCL) are existing items delivered to, and in service with, the United States Air Force (USAF) KC-46A Fuselage Trainers (FuT). The DCLs have the following salient characteristics:

Overview

1) The DCLs are low fidelity mockups of Aircraft Ground Equipment (AGE) and commonly encountered USAF cargo loads.

2) DCL construction consists of welded steel bodies, frames, and/or chassis equipped with Commercial-Off-The-Shelf (COTS) wheels and tires.

3) DCLs eliminate functional systems found on actual items in order to eliminate unnecessary maintenance and upkeep of AGE to support loadmaster training.

4) All welding is performed in accordance with American Welding Society (AWS) standards.

5) DCLs are finished with a single-color powder coat, providing a long-lasting durable finish.

6) DCLs are equipped with tie-down points representative of the actual AGE or cargo load, to support loadmaster training in securing and moving cargo.

Individual components are listed on the following pages.

C-5 Training Cargo Loads Salient Characteristics – Item List

1) Inert Fire Bottle (USAF), P/N 693-0-7500

a. Free standing welded steel frame

b. Non-pressurized tank

c. Integrated pintle tow ring

d. Two (2) COTS pneumatic wheel/tire assemblies

e. COTS hose assembly and integrated hanger

f. Blue powder coat finish to denote non-functional fire bottle

g. Approximate dimensions:

i. 60” height

ii. 36” width

iii. 36” length

2) IDG Service Cart (USAF), P/N 693-0-1500

a. Free standing welded steel frame

b. Non-pressurized tank

c. Fixed position simulated pump handle

d. Two (2) COTS solid wheel/tire assemblies

e. Gray powder coat finish

f. Approximate dimensions:

i. 48” height

ii. 17” width

iii. 26” length

3) Purged F-16 Wing Tank & Cart (USAF), P/N 693-0-7420

a. Free standing welded steel frame and faceted tank

b. Simulated F-16 external wing tank with attached pylon

c. Non-pressurized simulated tank

d. Integrated tow bar with pintle tow ring

e. Four (4) locking, swiveling solid caster wheels

f. Integrated tie-down rings

g. Gray powder coat finish

h. Approximate dimensions:

i. 66” height

ii. 56” width

iii. 202” length

4) Light Cart/Floodlight (USAF), P/N 693-0-6001

a. Free standing welded steel frame and power unit

b. Simulated, non-functional light floodlight assembly in fixed, stowed position

c. Two (2) COTS pneumatic wheel/tire assemblies

d. Two (2) COTS swivel jacks, with solid caster wheels

e. Integrated tie-down rings

f. Gray powder coat finish

g. Approximate dimensions:

i. 73” height

ii. 68” width

iii. 96” length

5) Portable Heater (USAF), P/N 693-0-5001

a. Free standing welded steel frame and power unit

b. Two (2) COTS pneumatic wheel/tire assemblies

c. One (1) COTS swivel jack, with solid caster wheel

d. Integrated tow bar with pintle tow ring

e. Integrated tie-down rings

f. Gray powder coat finish

g. Approximate dimensions:

i. 49” height

ii. 62” width

iii. 103” length

6) Aircraft Tow Bar (USAF), P/N 693-0-0001

a. Free standing welded steel assembly

b. Non-functional for aircraft towing

c. Integrated pintle tow ring

d. Two (2) COTS solid wheel/tire assemblies

e. Gray powder coat finish

f. Approximate dimensions:

i. 40” height

ii. 29” width

iii. 214” length

7) Fighter Engine & Trailer (USAF), P/N 693-0-5501

a. Free standing welded steel cart frame and faceted engine canister

b. Integrated tow bar with pintle tow ring

c. Four (4) COTS pneumatic wheel/tire assemblies

d. Rear axle equipped with manually actuated brakes

e. Integrated tie-down rings

f. Gray powder coat finish

g. Approximate dimensions:

i. 89” height

ii. 65” width

iii. 182” length

8) Inert Liquid Oxygen (LOX) Cart (USAF), P/N 693-0-4500

a. Free standing welded steel cart frame and faceted tank

b. Non-pressurized simulated tank

c. Integrated pintle tow ring

d. Two (2) COTS pneumatic wheel/tire assemblies

e. One (1) COTS swivel caster with pneumatic wheel/tire assembly

f. Rear axle equipped with manually actuated brakes

g. Integrated tie-down rings

h. Gray powder coat finish

i. Approximate dimensions:

i. 41” height

ii. 53” width

iii. 82” length

9) Hydraulic System Cart (USAF), P/N 693-0-2010

b. Four (4) COTS pneumatic wheel/tire assemblies

c. Rear axle equipped with manually actuated brakes

d. Integrated tie-down rings

e. Integrated tow bar and steerable forward axle

f. Gray powder coat finish

g. Approximate dimensions:

i. 73” height

ii. 66” width

iii. 118” length

10) 463L Stack 5 (USAF), P/N 693-0-8200

b. Integrated tie down rings

c. Silver powder coat finish

d. Approximate dimensions:

i. 11” height

ii. 88” width

iii. 108” length

11) 463L Stack 15 (USAF), P/N 693-0-8400

b. Integrated tie down rings

c. Silver powder coat finish

d. Approximate dimensions:

i. 34” height

ii. 88” width

iii. 108” length

12) B-1 Stand (USAF), P/N 693-0-7800

a. Free standing welded steel frame assembly

b. Non-functional representation of stair stand in collapsed position

c. Integrated tow bar with pintle tow ring

d. Two (2) COTS pneumatic wheel/tire assemblies

e. Two (2) COTS swivel caster with solid wheel/tire assembly

f. Two (2) COTS swivel jacks with footplates

g. Gray powder coat finish

h. Approximate dimensions:

i. 45” height

ii. 85” width

iii. 216” length