Asbestos Survey_Bldg-54_20111215.pdf

PDF 2 MB Posted

Attached to
Replace roof of Building 54, Fort Bliss, TX
Solicitation number
W911SG25BA033
Issued by

About this file

This document is an Asbestos Survey Report for Building 54 at Fort Bliss, Texas, conducted by ENCON International, Inc. on December 15, 2011. The survey identified asbestos-containing materials (ACM) in the building, with window caulking on both the first and second floors testing positive for 3% chrysotile asbestos. The building, which is a two-story fire station approximately 10,250 square feet in size, was constructed with brick and stucco walls on a concrete foundation.

The survey was performed in accordance with Asbestos National Emissions Standards for Hazardous Air Pollutants (NESHAP) and Texas Asbestos Health Protection Rules. Of the 51 samples collected and analyzed, only the window caulking samples tested positive for asbestos. The report recommends proper notification to appropriate authorities prior to any asbestos abatement, renovation, or demolition activities, and emphasizes that any disturbance of asbestos-containing materials must be performed by licensed and trained individuals following specific methodologies.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

El Paso Office: 7307 Remcon Circle, Suite 103 El Paso, Texas 79912 Fax 915-581-2049 Phone 915-833-3740

Engineering, Environmental & Technical Services

ASBESTOS SURVEY REPORT

BUILDING 54

FORT BLISS, TEXAS 79916

Prepared for:

Mr. Eddie Gardea

TEPA EC, LLC

6501 Boeing Drive Suite D-4

Fort Bliss, TX 79925

Prepared by:

ENCON International, Inc.

7307 Remcon Circle, Suite 103

El Paso, Texas 79912

Date of Inspection:

December 15, 2011

ENCON Project No. 1040-11

E

N C O N INTERNATIONAL, INC.

Engineering, Environmental & Technical Services

December 21, 2011

Mr. Eddie Gardea Phone: (915) 773-8400

Tepa EC, LLC Via email eddie.gardea@mailhosts.com

6501 Boeing Drive Suite D-4

El Paso, TX 79925

RE: ASBESTOS SURVEY REPORT

Building 54

Fort Bliss, TX 79916

Dear Mr. Gardea, ENCON International, Inc., (ENCON) has submitted for your review the attached Asbestos

Survey Report. This Asbestos Survey was conducted in accordance with Asbestos National

Emissions Standards for Hazardous Air Pollutants (NESHAP): 40 CFR Part 61, Subpart M.

Sampling protocols were performed in accordance with the Texas Asbestos Health Protection

Rules (TAHPR).

This Asbestos Survey was properly performed by ENCON DSHS licensed personnel. ENCON’s personnel have been trained and are in compliance with Texas Department of State Health

Services (DSHS) regulations.

We appreciate the opportunity to be of service to you. Please call if you have any questions or if we may be of further assistance.

Sincerely, Alex Woelper, P.E.

Program Manager

Attachments:

Asbestos Survey Report

Asbestos Drawings

Photo Log

Laboratory Documentation

E

N C O N INTERNATIONAL, INC.

Asbestos Survey Report ENCON International, Inc.

Ft. Bliss, Bldg. 54 Project No. 1040-11

El Paso Office: 7307 Remcon Circle, Suite 103 El Paso, Texas 79912 Fax 915-581-2049 Phone 915-833-3740

ASBESTOS SURVEY REPORT

Ft. Bliss, Bldg. 54

SUMMARY

ENCON International, Inc. (ENCON) personnel performed an Asbestos Inspection of a structure designated as “Building 54” on Fort Bliss, Texas. The following are the field sample collection and analysis results for this inspection. The inspection was conducted to ensure compliance with

NESHAP – 40 CFR Part 61, Subpart M, which states that “prior to the commencement of the demolition or renovation, thoroughly inspect the affected facility or part of the facility where the demolition or renovation operation(s) will occur for the presence of asbestos, including Category

I and Category II non-friable ACM. ”

The sample collections are identified in the following table with sampled building components, subsequent laboratory analytical results, location of building materials and estimated quantities of positive samples:

Sampled Building Component Lab Result Location Quantity

Window caulking Positive Exterior ~600 LF

*Floor tile under plywood flooring Assumed 2 nd

Floor- inaccessible ~4,800 SF

Door caulking Negative Exterior N/A

Window glazing Negative Exterior N/A

Stucco Negative Exterior N/A

Roof shingles Negative Exterior N/A

Flashing/roof sealant Negative Exterior N/A

Pipe Wrap Negative Exterior N/A

Textured/drywall/joint compound Negative Throughout N/A

Cove base/mastic Negative 2 nd

Floor throughout N/A

Carpet/mastic Negative 2 nd

Floor throughout N/A

2’x4’ ceiling tile Negative Throughout N/A

Floor tile/mastic Negative Restrooms N/A

Acoustical tile Negative 2 nd

Floor N/A

Texture Negative Weight room N/A

Plaster Negative 2 nd

Floor N/A

The quantities provided above are estimates only and should be field verified by the abatement contractor. *Floor tile under the plywood flooring was inaccessible. Building occupant disclosed the presence of component.

El Paso Office: 7307 Remcon Circle, Suite 103 El Paso, Texas 79912 Fax 915-581-2049 Phone 915-833-3740

INTRODUCTION

This Asbestos Survey was performed by Mr. Tim Jones and Mr. Alberto Gonzalez on December

15, 2011. This Asbestos Survey was conducted in accordance with Asbestos National Emissions

Standards for Hazardous Air Pollutants (NESHAP): 40 CFR Part 61, Subpart M. Sampling protocols were performed in accordance with the Texas Asbestos Health Protection Rules

(TAHPR). Building 54 was scheduled for renovations or demolition and was visually inspected.

The suspect asbestos-containing materials could be divided into seventeen (17) homogeneous areas, which included the following: textured/drywall/joint compound (2 types), door caulking, window caulking, window glazing, stucco, shingle roofing, roof penetration sealant, black pipe wrap, carpet/mastic, cove base/mastic, 2’x4’ ceiling tile, acoustical tile (2 types), texture, plaster, and flooring.

DESCRIPTION

Building 54 was occupied and is being used as a fire station at Fort Bliss, Texas. This facility occupied an area of approximately 10,250 SF. This building was a two-story structure which was constructed with brick and stucco walls on a concrete foundation. The interior was partitioned with textured drywall/joint compound. At the time this Asbestos Survey was performed, the date of construction was not known.

SAMPLING METHODOLOGY

A visual inspection of the building was conducted to develop a sampling plan. This included determining sample collection points, homogeneous materials and areas. Friability was assessed by manually manipulating the suspect asbestos materials utilizing hand pressure to determine if the materials, when dry, can be crumbled, pulverized, or reduced to powder. Seventeen (17) homogeneous areas were established and at least three (3) samples were collected from each area. Areas that have suspect asbestos-containing surfacing, thermal systems insulation, or miscellaneous materials are to be considered homogeneous. These samples were each uniquely and individually identified and logged into a chain of custody document and prepared for shipment to a third-party independent laboratory for analysis. Building materials that are not considered suspect include the following; concrete, metal, glass, and wood. Destructive sampling was not authorized or performed to locate hidden or inaccessible materials.

El Paso Office: 7307 Remcon Circle, Suite 103 El Paso, Texas 79912 Fax 915-581-2049 Phone 915-833-3740

SAMPLE ANALYSIS

Fifty-one (51) samples were submitted for analysis. Bulk PLM analysis was conducted utilizing the EPA Method 600/R-93/116. This method separates the sample material into various layers based on their morphology, and then the presence of the different asbestos fibers in each of these layers is detected. The analysis was performed by Apex Precision Analytical Services, Inc.

located in Friendswood, TX. The term asbestos-containing material (ACM) is defined as a material that contains greater than 1% of any asbestiform varieties of Chrysotile, Amosite, Crocidolite, Tremolite, Anthophyllite, and Actinolite, or combinations of these materials.

Asbestos materials were determined by the July 1993 Environmental Protection Agency as recommended in document EPA/600/R-93/116 titled, "Method for the Determination of

Asbestos in Bulk Building Materials." Copies of the asbestos laboratory results and related documentation have been attached to this Report.

CONCLUSION

Proper notification should be made to the appropriate authorities prior to any asbestos abatement activity, renovation or operations and maintenance (O&M) activity affecting asbestos-containing building materials (ACBM), or any demolition in facilities or public buildings. The Texas DSHS

(§295.34 (a) (2)) states that if disturbance of friable and non-friable asbestos-containing building materials (ACBM) is anticipated, these materials shall be removed prior to performing any demolition or renovation activities by licensed and trained individuals according to methodology specified by §295.58-§295.60. A proper notification shall be submitted to the DSHS no less than

10 working days prior to commencement of abatement activity.

Contact the Asbestos Consultant listed below with any clarifications that may be needed.

Inspected by: Inspected by: Reviewed by:

Tim Jones Alberto Gonzalez AliciaOrrantia

Asbestos Consultant Asbestos Inspector Project Manager

Asbestos Sample Locations

ENCON #: 1040-11

Date: 12/15/11

Legend

See Above

Bldg. 54

First Floor

Asbestos Homogeneous Drawing

N.T.S.

Window Caulking

Date: 12/15/11

Legend

See Above

Bldg. 54

Second Floor

Asbestos Homogeneous Drawing

N.T.S.

Assumed 12" x 12" Floor Tile & Mastic under wood floorWindow Caulking

Date: 12/15/11

Legend

# Asbestos Sample Location

Positive Asbestos Sample

Bldg. 54

First Floor

Asbestos Sample Location Drawing

N.T.S.

08 0910 11 12

13,14,15 Roof

23 25

31 32 33

16,17,18 Roof

19,20,21

Date: 12/15/11

Legend

# Asbestos Sample Location

Positive Asbestos Sample

Bldg. 54

Second Floor

Asbestos Sample Location Drawing

N.T.S.

49,50,51

Building 54 ♦ Fort Bliss, TX 79916 Project No. 1040-11

Photo Log of Building and Positive Components

View of Building 54

View of windows with caulking

(positive) 1 st floor.

View of windows with caulking

(positive) 2 nd floor.

ASBESTOS BULK REPORT

Date: December 20, 2011

ENCON International

Report: 5011-2777 1040-11 / Bldg. 54

Gary R. Simmons Laboratory Manager

This document shall be considered a duly signed original report of the results obtained from the analyses performed. All analyses are done within government guidelines and regulations.

Analytical results and reports are generated by Apex Precision Analytical Services at the request of and for the exclusive use of the person or entity (client) named on such report. Result, reports or copies of same will not be released by Apex Precision Analytical Services to any third party without the written request from client. These results only repesent the materials submitted. Supporting laboratory documentation is available upon request. This report cannot be used to represent conditions at any other location, date or time and does not imply that this space is free from these or any other contaminants. No responsibility or liability is assumed for the manner in which these results are used or interpreted. This must not be used to claim product endorsement by NVLAP or any government agency of the United States. Apex Precision Analytical Services reserves the right to dispose of all samples after a period of thirty (30) days, according to all state and federal guidelines, unless otherwise specified.

NVLAP Lab Code: 200633-0 PLM TDSHS Asbestos License#: 30-0312 PLM/PCM

PLM (Bulk) - Asbestos Analysis Report - Visual ID (EPA Method 600/R-93-116 Visual Area Estimation)

ENCON International Report Number: 5011-2777

7307 Remcon Circle, Suite 100 Report Date: December 20, 2011

El Paso, TX 79912 Samples Collected: December 15, 2011

915-833-3740 Date Received: December 19, 2011

Contact: Tim Jones Turn-around time: 24 Hours

Job ID / Site: 1040-11 / Bldg. 54

Matrix Client Sample

Number

Lab Sample

Number

(by layer)

Color / Description /

Fibrous / NonFibrous /

Homogeneity

Asbestos Content

Type & %

Non-Asbestos

Fibrous Type & %

01 5011-2777-01 None Detected None Detected Binder

02 5011-2777-02 None Detected None Detected Binder

03 5011-2777-03 None Detected None Detected Binder

04 5011-2777-04 3% None Detected Binder

05 5011-2777-05 3% None Detected Binder

06 5011-2777-06 3% None Detected Binder

07 5011-2777-07 None Detected None Detected Binder

08 5011-2777-08 <1% None Detected Binder

09 5011-2777-09 None Detected None Detected Binder

10 5011-2777-10 None Detected None Detected Binder

White / Door Caulking / NonFibrous / Homogeneous

White / Door Caulking / NonFibrous / Homogeneous

White / Door Caulking / NonFibrous / Homogeneous

Light Tan / Window Caulking / Fibrous / Homogeneous

Chrysotile

Light Tan / Window Caulking / Fibrous / Homogeneous

Chrysotile

Light Tan / Window Caulking / Fibrous / Homogeneous

Chrysotile

Light Grey / Window Glazing / NonFibrous / Homogeneous

Off White / Window Glazing / Fibrous / Homogeneous

Chrysotile

Light Grey / Window Glazing / NonFibrous / Homogeneous

Yellow / Stucco / NonFibrous / Homogeneous

Analytical results and reports are generated by Apex Precision Analytical Services at the request of and for the exclusive use of the person or entity (client) named on such report. Result, reports or copies of same will not be released by Apex Precision Analytical Services to any third party without the written request from client. These results only repesent the materials submitted. Supporting laboratory documentation is available upon request. This report cannot be used to represent conditions at any other location, date or time and does not imply that this space is free from these or any other contaminants. No responsibility or liability is assumed for the manner in which these results are used or interpreted. This must not be used to claim product endorsement by NVLAP or any government agency of the United States. Apex Precision Analytical Services reserves the right to dispose of all samples after a period of thirty (30) days, according to all state and federal guidelines, unless otherwise specified.

NVLAP Lab Code: 200633-0 PLM TDSHS Asbestos License#: 30-0312 PLM/PCM

PLM (Bulk) - Asbestos Analysis Report - Visual ID (EPA Method 600/R-93-116 Visual Area Estimation)

ENCON International Report Number: 5011-2777

7307 Remcon Circle, Suite 100 Report Date: December 20, 2011

El Paso, TX 79912 Samples Collected: December 15, 2011

915-833-3740 Date Received: December 19, 2011

Contact: Tim Jones Turn-around time: 24 Hours

Job ID / Site: 1040-11 / Bldg. 54

Matrix Client Sample

Number

Lab Sample

Number

(by layer)

Color / Description /

Fibrous / NonFibrous /

Homogeneity

Asbestos Content

Type & %

Non-Asbestos

Fibrous Type & %

11 5011-2777-11 None Detected None Detected Binder

12 5011-2777-12 None Detected None Detected Binder

13 5011-2777-13 None Detected Fibrous Glass 5% Binder

14 5011-2777-14 None Detected Fibrous Glass 5% Binder

15 5011-2777-15 None Detected Fibrous Glass 5% Binder

16 5011-2777-16 None Detected Cellulose 3% Binder

17 5011-2777-17 None Detected Cellulose 3% Binder

18 5011-2777-18 None Detected Cellulose 3% Binder

19 5011-2777-19 None Detected None Detected Binder

20 5011-2777-20 None Detected None Detected Binder

Yellow / Stucco / NonFibrous / Homogeneous

Yellow / Stucco / NonFibrous / Homogeneous

Grey,Black / Roofing Shingle / Fibrous / Homogeneous

Grey,Black / Roofing Shingle / Fibrous / Homogeneous

Grey,Black / Roofing Shingle / Fibrous / Homogeneous

Off White,Black / Roofing Material / Fibrous / Homogeneous

Off White,Black / Roofing Material / Fibrous / Homogeneous

Off White,Black / Roofing Material / Fibrous / Homogeneous

Grey,Black / Pipe Wrap / NonFibrous / Homogeneous

Grey,Black / Pipe Wrap / NonFibrous /

Analytical results and reports are generated by Apex Precision Analytical Services at the request of and for the exclusive use of the person or entity (client) named on such report. Result, reports or copies of same will not be released by Apex Precision Analytical Services to any third party without the written request from client. These results only repesent the materials submitted. Supporting laboratory documentation is available upon request. This report cannot be used to represent conditions at any other location, date or time and does not imply that this space is free from these or any other contaminants. No responsibility or liability is assumed for the manner in which these results are used or interpreted. This must not be used to claim product endorsement by NVLAP or any government agency of the United States. Apex Precision Analytical Services reserves the right to dispose of all samples after a period of thirty (30) days, according to all state and federal guidelines, unless otherwise specified.

NVLAP Lab Code: 200633-0 PLM TDSHS Asbestos License#: 30-0312 PLM/PCM

PLM (Bulk) - Asbestos Analysis Report - Visual ID (EPA Method 600/R-93-116 Visual Area Estimation)

ENCON International Report Number: 5011-2777

7307 Remcon Circle, Suite 100 Report Date: December 20, 2011

El Paso, TX 79912 Samples Collected: December 15, 2011

915-833-3740 Date Received: December 19, 2011

Contact: Tim Jones Turn-around time: 24 Hours

Job ID / Site: 1040-11 / Bldg. 54

Matrix Client Sample

Number

Lab Sample

Number

(by layer)

Color / Description /

Fibrous / NonFibrous /

Homogeneity

Asbestos Content

Type & %

Non-Asbestos

Fibrous Type & %

21 5011-2777-21 None Detected None Detected Binder

22 5011-2777-22A None Detected None Detected Binder

5011-2777-22B None Detected Cellulose 95% Binder

5011-2777-22C None Detected Cellulose 10% Binder

23 5011-2777-23A None Detected None Detected Binder

5011-2777-23B None Detected Cellulose 10% Binder

24 5011-2777-24A None Detected None Detected Binder

5011-2777-24B None Detected Fibrous Glass 95% Binder

5011-2777-24C None Detected Cellulose 10% Binder

25 5011-2777-25 None Detected Binder

Grey,Black / Pipe Wrap / NonFibrous / Homogeneous

White / Texture,Joint Compound / NonFibrous / Homogeneous

Off White / Joint Tape / Fibrous / Homogeneous

Tan,White / Drywall / Fibrous / Homogeneous

White / Texture,Joint Compound / NonFibrous / Homogeneous

Tan,White / Drywall / Fibrous / Homogeneous

White / Texture,Joint Compound / NonFibrous / Homogeneous

Yellow / Joint Tape / Fibrous / Homogeneous

Tan,White / Drywall / Fibrous / Homogeneous

White,Grey / 2x4 Ceiling Tile / Fibrous / Homogeneous

Cellulose Fibrous Glass

45% 5%

Analytical results and reports are generated by Apex Precision Analytical Services at the request of and for the exclusive use of the person or entity (client) named on such report. Result, reports or copies of same will not be released by Apex Precision Analytical Services to any third party without the written request from client. These results only repesent the materials submitted. Supporting laboratory documentation is available upon request. This report cannot be used to represent conditions at any other location, date or time and does not imply that this space is free from these or any other contaminants. No responsibility or liability is assumed for the manner in which these results are used or interpreted. This must not be used to claim product endorsement by NVLAP or any government agency of the United States. Apex Precision Analytical Services reserves the right to dispose of all samples after a period of thirty (30) days, according to all state and federal guidelines, unless otherwise specified.

NVLAP Lab Code: 200633-0 PLM TDSHS Asbestos License#: 30-0312 PLM/PCM

PLM (Bulk) - Asbestos Analysis Report - Visual ID (EPA Method 600/R-93-116 Visual Area Estimation)

ENCON International Report Number: 5011-2777

7307 Remcon Circle, Suite 100 Report Date: December 20, 2011

El Paso, TX 79912 Samples Collected: December 15, 2011

915-833-3740 Date Received: December 19, 2011

Contact: Tim Jones Turn-around time: 24 Hours

Job ID / Site: 1040-11 / Bldg. 54

Matrix Client Sample

Number

Lab Sample

Number

(by layer)

Color / Description /

Fibrous / NonFibrous /

Homogeneity

Asbestos Content

Type & %

Non-Asbestos

Fibrous Type & %

26 5011-2777-26 None Detected Binder

27 5011-2777-27 None Detected Binder

28 5011-2777-28 None Detected Binder

29 5011-2777-29A None Detected Cellulose 85% Binder

5011-2777-29B None Detected None Detected Binder

30 5011-2777-30A None Detected Cellulose 85% Binder

5011-2777-30B None Detected None Detected Binder

31 5011-2777-31 None Detected None Detected Binder

32 5011-2777-32 None Detected None Detected Binder

33 5011-2777-33 None Detected None Detected Binder

White,Grey / 2x4 Ceiling Tile / Fibrous / Homogeneous

Cellulose Fibrous Glass

45% 5%

White,Grey / 2x4 Ceiling Tile / Fibrous / Homogeneous

Cellulose Fibrous Glass

45% 5%

White,Grey / Ceiling Tile / Fibrous / Homogeneous

Cellulose Fibrous Glass

30% 30%

White,Tan / Ceiling Tile / Fibrous / Homogeneous

Brown / Mastic / NonFibrous / Homogeneous

White,Tan / Ceiling Tile / Fibrous / Homogeneous

Brown / Mastic / NonFibrous / Homogeneous

White,Grey / Texture / NonFibrous / Homogeneous

White,Grey / Texture / NonFibrous / Homogeneous

White,Grey / Texture / NonFibrous /

Analytical results and reports are generated by Apex Precision Analytical Services at the request of and for the exclusive use of the person or entity (client) named on such report. Result, reports or copies of same will not be released by Apex Precision Analytical Services to any third party without the written request from client. These results only repesent the materials submitted. Supporting laboratory documentation is available upon request. This report cannot be used to represent conditions at any other location, date or time and does not imply that this space is free from these or any other contaminants. No responsibility or liability is assumed for the manner in which these results are used or interpreted. This must not be used to claim product endorsement by NVLAP or any government agency of the United States. Apex Precision Analytical Services reserves the right to dispose of all samples after a period of thirty (30) days, according to all state and federal guidelines, unless otherwise specified.

NVLAP Lab Code: 200633-0 PLM TDSHS Asbestos License#: 30-0312 PLM/PCM

PLM (Bulk) - Asbestos Analysis Report - Visual ID (EPA Method 600/R-93-116 Visual Area Estimation)

ENCON International Report Number: 5011-2777

7307 Remcon Circle, Suite 100 Report Date: December 20, 2011

El Paso, TX 79912 Samples Collected: December 15, 2011

915-833-3740 Date Received: December 19, 2011

Contact: Tim Jones Turn-around time: 24 Hours

Job ID / Site: 1040-11 / Bldg. 54

Matrix Client Sample

Number

Lab Sample

Number

(by layer)

Color / Description /

Fibrous / NonFibrous /

Homogeneity

Asbestos Content

Type & %

Non-Asbestos

Fibrous Type & %

34 5011-2777-34A None Detected None Detected Binder

5011-2777-34B None Detected Cellulose 95% Binder

5011-2777-34C None Detected Cellulose 10% Binder

35 5011-2777-35A None Detected None Detected Binder

5011-2777-35B None Detected Cellulose 95% Binder

5011-2777-35C None Detected Cellulose 10% Binder

36 5011-2777-36A None Detected None Detected Binder

5011-2777-36B None Detected Cellulose 95% Binder

5011-2777-36C None Detected Cellulose 10% Binder

37 5011-2777-37 None Detected None Detected Binder

White / Texture,Joint Compound / NonFibrous / Homogeneous

Off White / Joint Tape / Fibrous / Homogeneous

Tan,White / Drywall / Fibrous / Homogeneous

White / Texture,Joint Compound / NonFibrous / Homogeneous

Off White / Joint Tape / Fibrous / Homogeneous

Tan,White / Drywall / Fibrous / Homogeneous

White / Texture,Joint Compound / NonFibrous / Homogeneous

Off White / Joint Tape / Fibrous / Homogeneous

Green,Tan / Drywall / Fibrous / Homogeneous

Yellow / Carpet Mastic / NonFibrous /

Analytical results and reports are generated by Apex Precision Analytical Services at the request of and for the exclusive use of the person or entity (client) named on such report. Result, reports or copies of same will not be released by Apex Precision Analytical Services to any third party without the written request from client. These results only repesent the materials submitted. Supporting laboratory documentation is available upon request. This report cannot be used to represent conditions at any other location, date or time and does not imply that this space is free from these or any other contaminants. No responsibility or liability is assumed for the manner in which these results are used or interpreted. This must not be used to claim product endorsement by NVLAP or any government agency of the United States. Apex Precision Analytical Services reserves the right to dispose of all samples after a period of thirty (30) days, according to all state and federal guidelines, unless otherwise specified.

NVLAP Lab Code: 200633-0 PLM TDSHS Asbestos License#: 30-0312 PLM/PCM

PLM (Bulk) - Asbestos Analysis Report - Visual ID (EPA Method 600/R-93-116 Visual Area Estimation)

ENCON International Report Number: 5011-2777

7307 Remcon Circle, Suite 100 Report Date: December 20, 2011

El Paso, TX 79912 Samples Collected: December 15, 2011

915-833-3740 Date Received: December 19, 2011

Contact: Tim Jones Turn-around time: 24 Hours

Job ID / Site: 1040-11 / Bldg. 54

Matrix Client Sample

Number

Lab Sample

Number

(by layer)

Color / Description /

Fibrous / NonFibrous /

Homogeneity

Asbestos Content

Type & %

Non-Asbestos

Fibrous Type & %

38 5011-2777-38 None Detected None Detected Binder

39 5011-2777-39 None Detected None Detected Binder

40 5011-2777-40A None Detected None Detected Binder

5011-2777-40B None Detected None Detected Binder

41 5011-2777-41A None Detected None Detected Binder

5011-2777-41B None Detected None Detected Binder

42 5011-2777-42A None Detected None Detected Binder

5011-2777-42B None Detected None Detected Binder

43 5011-2777-43 None Detected Fibrous Glass 85% Binder

44 5011-2777-44 None Detected Binder

Yellow / Carpet Mastic / NonFibrous / Homogeneous

Yellow / Carpet Mastic / NonFibrous / Homogeneous

Brown / Cove Base / NonFibrous / Homogeneous

Yellow / Mastic / NonFibrous / Homogeneous

Brown / Cove Base / NonFibrous / Homogeneous

Yellow / Mastic / NonFibrous / Homogeneous

Brown / Cove Base / NonFibrous / Homogeneous

Yellow / Mastic / NonFibrous / Homogeneous

White,Yellow / 2x4 Ceiling Tile / Fibrous / Homogeneous

White,Grey / 2x4 Ceiling Tile / Fibrous / Homogeneous

Cellulose Fibrous Glass

30% 20%

Analytical results and reports are generated by Apex Precision Analytical Services at the request of and for the exclusive use of the person or entity (client) named on such report. Result, reports or copies of same will not be released by Apex Precision Analytical Services to any third party without the written request from client. These results only repesent the materials submitted. Supporting laboratory documentation is available upon request. This report cannot be used to represent conditions at any other location, date or time and does not imply that this space is free from these or any other contaminants. No responsibility or liability is assumed for the manner in which these results are used or interpreted. This must not be used to claim product endorsement by NVLAP or any government agency of the United States. Apex Precision Analytical Services reserves the right to dispose of all samples after a period of thirty (30) days, according to all state and federal guidelines, unless otherwise specified.

NVLAP Lab Code: 200633-0 PLM TDSHS Asbestos License#: 30-0312 PLM/PCM

PLM (Bulk) - Asbestos Analysis Report - Visual ID (EPA Method 600/R-93-116 Visual Area Estimation)

ENCON International Report Number: 5011-2777

7307 Remcon Circle, Suite 100 Report Date: December 20, 2011

El Paso, TX 79912 Samples Collected: December 15, 2011

915-833-3740 Date Received: December 19, 2011

Contact: Tim Jones Turn-around time: 24 Hours

Job ID / Site: 1040-11 / Bldg. 54

Matrix Client Sample

Number

Lab Sample

Number

(by layer)

Color / Description /

Fibrous / NonFibrous /

Homogeneity

Asbestos Content

Type & %

Non-Asbestos

Fibrous Type & %

45 5011-2777-45 None Detected Binder

46 5011-2777-46 None Detected None Detected Binder

47 5011-2777-47 None Detected None Detected Binder

48 5011-2777-48 None Detected None Detected Binder

49 5011-2777-49 Black / Flooring / Fibrous / Homogeneous None Detected Cellulose 15% Binder

50 5011-2777-50 Black / Flooring / Fibrous / Homogeneous None Detected Cellulose 15% Binder

51 5011-2777-51 Black / Flooring / Fibrous / Homogeneous None Detected Cellulose 15% Binder

White,Grey / 2x4 Ceiling Tile / Fibrous / Homogeneous

Cellulose Fibrous Glass

30% 20%

White / Texture / NonFibrous / Homogeneous

White / Texture / NonFibrous / Homogeneous

White / Texture / NonFibrous /

Chain of Custody

Dates Collected: December 15,2011 Date Sent: December 16,2011

Contact Tim Jones Remarks:

Company: ENCON International P.O. #:

Address: 7307 Remcon Circle, Suite 100

El Paso, TX 79912 (For APASI use only)

Phone: (915) 833-3740 Fax: (915) 581-2049

Turn Around Time:

Urgent / ASAP: Rush: X Hr 48 Hr Routine: 3 Day 5 Day

Project Name/Number: 1040-11 (Bldg. 54)

Mycology(Mold) Spore Tray-Air Samples Fungal/Mold spore count by Air-O-Cell, Cyclex (d), BioCell, or other spore trap cassette/device

Phase Contrast Microscopy(PCM)-Air Samples Fiber Concentration by NIOSH Method 7400 Issue 2

Industrial Hygiene-Air & Bulk Samples (RCF) Refractory Ceramic Fiber (Bulk) Identification

(Visual Estimation) by Polarized Light Microscopy

MycologyfMold) Bulk ID Samples Fungal/Mold Identification - bulk sample, tape lift, swab

Polarized Light Microscopy(PLM)-Bulk Samples folar, Asbestos Identification (Visual Estimation) by EPA 600/R-93/116 Method Asbestos Identification (Point Count) by EPA 600/M4-82-020 Method

Asbestos Identification (Soil/Prep) by Gravimetric Reduction

Sample #: Location / Description: Quantity Instructions -01 Door Caulking -02 Door Caulking -03 Door Caulking -04 Window Caulking -05 Window Caulking -06 Window Caulking -07 Window Glazing -08 Window Glazing -09 Window Glazing -10 Stucco

Relinquished by: Received by: ^ <

Date: 12-16-11 Time: Date: Time:

SOU-2.7)7

Sample #: Location: Quantity Instructions -11 Stucco -12 Stucco -13 Roof shingles -14 Roof shingles -15 Roof shingles -16 Flashing/roof penetration -17 Flashing/roof penetration -18 Flashing/roof penetration -19 Black Pipe Wrap -20 Black Pipe Wrap -21 Black Pipe Wrap -22 Textured drywall/joint cpd-walls -23 Textured drywall/joint cpd walls -24 Textured drywall/joint cpd walls -25 2x4 lay in ceiling tile -26 2x4 lay in ceiling tile -27 2x4 lay in ceiling tile -28 12x12 ceiling tile -29 12x12 ceiling tile -30 12x12 ceiling tile -31 Texture on concrete -32 Texture on concrete -33 Texture on concrete -34 Textured drywall/joint cpd-walls -35 Textured drywall/joint cpd walls -36 Textured drywall/joint cpd walls -37 Carpet mastic -38 Carpet mastic -39 Carpet mastic -40 Cove base/ mastic -41 Cove base/ mastic -42 Cove base/ mastic -43 2x4 acoustical ceiling tile -44 2x4 acoustical ceiling tile -45 2x4 acoustical ceiling tile -46 Textured plaster walls -47 Textured plaster walls -48 Textured plaster walls Pg. 2 of 3

Sample #: Location: Quantity -49 Flooring under subfloor -50 Flooring under subfloor -51 Flooring under subfloor

Bldg 54 Cover page asbestos
Bldg 54 Asbestos report
Bldg 54 Asbestos Homogeneous Drawing 1st Floor
Bldg 54 Asbestos Homogeneous Drawing 1st Floor.vsd
Page-1
Bldg 54 Asbestos Homogeneous Drawing 2nd Floor
Bldg 54 Asbestos Homogeneous Drawing 2nd Floor.vsd
Page-1
Bldg 54 Asbestos Drawing 1st Floor
Bldg 54 Asbestos Drawing 1st Floor.vsd
Page-1
Bldg 54 Asbestos Drawing 2nd Floor
Bldg 54 Asbestos Drawing 2nd Floor.vsd
Page-1
photo log
Bldg 54 Lab Results
Bldg 54 COC

File details come from the government source that posted it. Updated .