Articulated Loader.pdf
PDF 386 KB Posted
- Attached to
- Furnish Articulating Loader with accessories
- Solicitation number
- D21-035-O
- Issued by
- Wisconsin
About this file
This is a specifications document for the University of Wisconsin-Milwaukee's procurement of one new articulating multi-purpose compact loader with accessories. The document outlines minimum equipment requirements for the base machine, establishing a comprehensive technical baseline that bidders must meet or exceed. Key specifications include front riding articulation, rigid frame design, side entry operator station, maximum width of 51.4 inches, offset telescopic lift boom with self-leveling capability, minimum retracted boom height of 109.5 inches extending to 122 inches, and boom extension and retraction of no less than 27 inches. The loader must feature hydrostatic direct 4WD with four independent drive motors, multi-connector hydraulic system for three front lines, 8-function joystick controls, reverse beeper, parking brake, high-volume hydraulic oil cooler, integrated ROPS safety frame, full enclosed cab with heating and air conditioning, ground speed of at least 10.5 mph, and 320/55-15 turf profile tires. The document does not specify response dates, due dates, site visits, bidders meetings, or award dates.
The specifications further require a suspended heated seat with armrests and adjustable angle, seat belt integrated with powertrain lockout, integrated 375-pound rear weight, optional rear-side weight kits of 400 pounds, minimum 10.5-gallon fuel tank, and minimum 10.0-gallon hydraulic oil tank. LED lighting includes two front and one rear light at 700 lumens each, with optional factory-installed beacon. The document notes that measurements may vary slightly and that UWM will serve as sole judge regarding substantial comparability of bids. Trade-in options are available. No pricing terms, set-asides, incumbent information, funding sources, or contract term details are provided in this specifications document.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| D21-035-O.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Required Minimum Specifications For One ( 1) New Articulating Multi-Purpose Compact Loader
These specifications shall be regarded as minimum requirements. All integral parts not specifically mentioned in the scope of these specifications that are necessary to provide a complete working unit shall be included.
Any specification that includes a measurement of size, weight, or volume may vary slightly from the stated specifications. If measurements for unit and/or accessories bid vary, UWM will be the sole judge as to whether or not the unit being bid is substantially comparable. In the table below, check yes or no as to the base machine and list the exception, if needed, where noted.
SPECIFICATIONS:
BASE MACHINE - Check Y or N below and note exceptions where indicated y N Unit shall have front riding articulation.
y N Unit shall have rigid, non-oscillating, frame design.
y N Unit shall have a side entry operator station.
y N Unit shall have a max width of 51.4 in y __ N
Unit shall have an off-set, telescopic lift boom for maximum operator visibility of load and machine position.
y N Unit lift boom shall have a self-leveling system.
y N
Unit shall have a minimum retracted boom lift height of 109.5" and extended lift height of 122" as measured at the pivot pin.
y N The lift boom shall extend and retract no less than 27"
Y_ N
Unit shall have a multi-connector system for connecting 3 front hydraulic lines at once without back-pressure. (double acting: It has two pressure lines and one tank line).
y N Unit shall have a reverse beeper for safety.
y N Unit shall have hydrostatic direct 4WD with 4 independent drive motors.
y __ N
Unit shall have 2-wheel Drive Release Valve to provide more torque in low traction situations, or independent wheel movement to protect delicate surfaces from tire damage (such as turf).
y __ N
Unit shall have independent throttle to maintain constant RPM with variable ground speed.
y N Unit shall have 8-function joystick.
y N Unit will have switch activated hydraulic parking brake.
y N Unit shall have high volume hydraulic oil cooler.
y N Unit shall have safety frame (ROPS) integrated into the cab design.
y N Unit shall have 2-front & 1-rear LED 700 Lumen lights.
y N Unit should be equipped with a factory installed beacon.
y N Unit shall be equiooed with full� enclosed cab with integrated heater, A/C, and radio.
y N Unit shall have ground speed of no less than 10.5 mph.
y N Unit shall have 320/55-15 Turf Profile tires.
y N
Unit shall have suspended, heated seat with arm rests [with adjustable angle] and seat belt.
y N Unit shall have integrated 375 lb. rear weight.
y N Unit shall have rear-side weight kits (400 LB).
y N Unit shall have no less than 10.5 gal. fuel tank.
y N
Unit shall have no less than 10.0 gal. hydraulic oil tank in bottom of the machine.
Y_ N
Unit powertrain shall not function without the seat belt buckled (i.e. The machine will not move).
EXCEPTIONS
| Pages from Heavy Equipment.pdf |
| Pages from Heavy Equipment-2 |
File details come from the government source that posted it. Updated .