Approved SOW.pdf

This is a Statement of Work (SOW) approved for federal contract solicitation services at the Federal Bureau of Prisons facility in Oxford, Wisconsin. The project (26Z4AM7) authorizes the procurement and delivery of ten hollow metal security doors and frames to replace aging doors serving the Health Services area. There are no modifications to the primary structure or utilities associated with this project scope.

The SOW specifies precise quantity requirements: two 38" x 84" doors with ¼" tempered half-lite glazing and right-hand configuration for exam rooms, five 38" x 84" doors with left-hand configuration for exam rooms, and two 48" x 84" doors with right and left-hand configurations for staff offices. All doors and frames must comply with extensive specifications including ASTM A366M-91 for commercial-grade steel, ASTM B117-07a for salt spray testing, AWS D1.1 for structural welding, HMMA 863-04 for detention specifications, and NFPA 80 for fire doors. Detention hollow metal doors require 2-inch actual thickness with 0.12-inch side clearance, continuously welded seams, 16-gauge minimum stiffeners, reinforced vertical edges with 10-gauge steel channels, and rust-inhibitive primer meeting ASTM B117 salt spray and ASTM D1735 water fog test standards. Frames must use commercial-quality cold-rolled steel with 12 or 10-gauge thickness, zinc or galvanized coatings for high-humidity areas, and comprehensive hardware reinforcements. Delivery is restricted to 8:00 AM–2:00 PM, Monday through Friday, with five working days' advance notice required. The supply vendor must provide a five-year warranty covering all material and workmanship defects, and three copies of Safety Data Sheets must be submitted prior to purchase agreement. All equipment is subject to government acceptance determination for equal products.